EN 3475-403:2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking

This standard specifies a method of measuring the delamination and blocking of a finished cable.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftahrtverwendung - Prüfverfahren - Teil 403: Verblocken und Aufblättern

Diese Norm legt ein Verfahren zur Bestimmung des Verblockens und Aufblätterns einer fertigen Leitung fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 403: Collage et délamination

Cette norme définit une méthode pour mesurer le retrait et la délamination d'un câble terminé.
Elle doit être utilisée conjointement avec EN 3475-100.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking

General Information

• Status: Published
• Publication Date: 15-Jan-2002
• Withdrawal Date: 30-Jul-2002
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3475-403:2004 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking

Relations

• Corrected By: EN 3475-403:2002/AC:2003 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blockingLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 403: Verblocken und AufblätternSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 403: Collage et délaminationAerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-403:2002SIST EN 3475-403:2004en01-maj-2004SIST EN 3475-403:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-403January 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 403: Delamination and blockingSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essai - Partie 403: Collage etdélaminationLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt,Verwendung - Prüfverfahren - Teil 403: Verblocken undAufblätternThis European Standard was approved by CEN on 6 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-403:2002 ESIST EN 3475-403:2004
...