Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001)

This standard specifies a method based on cup tests for determining the water vapour permeance of building products and the water vapour permeability of building materials under isothermal conditions.  Different sets of test conditions are specified.
The general principles are applicable to all hygroscopic and non hygroscopic building materials and products, including those with facings and integral skins.  Annexes give details of test methods suitable for different material types.  This standard is not applicable in the case of test specimens with water vapour diffusion-equivalent air layer thickness values less than 0,1 m, as a result of increasing uncertainty in the measurement results.  If the measured water vapour diffusion-equivalent air layer thickness is greater than 1500 m the material can be considered impermeable.
The results obtained by this method are suitable for design purposes, production control and for inclusion in product specifications.

Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten - Bestimmung der Wasserdampfdurchlässigkeit (ISO 12572:2001)

Diese Norm legt ein Verfahren zur Bestimmung des Wasserdampfdiffusions-Durchlasskoeffizienten von Bauprodukten und des Wasserdampfdiffusionsleitkoeffizienten von Baustoffen unter isothermischen Bedingungen fest, das auf Prüfungen mit Prüfgefäßen basiert. Verschiedene Prüfbedingungen werden festgelegt.
Die allgemeinen Prinzipien gelten für alle hygroskopischen und nicht hygroskopischen Baustoffe und -produkte einschließlich solcher Stoffe und Produkte mit Beschichtungen oder Häuten. Einzelheiten zu Prüfverfahren, die für einzelne Stoffarten geeignet sind, sind in den Anhängen angegeben. Aufgrund der zunehmenden Messunsicherheit gilt diese Norm nicht für Probekörper mit einer wasserdampfdiffusionsäquivalenten Luftschichtdicke geringer als 0,1 m. Übersteigt die gemessene wasserdampfdiffusionsäquivalente Luftschichtdicke 1500 m, gilt der Stoff als wasserdampfundurchlässig.
Die Ergebnisse, die man nach diesem Verfahren erhält, sind geeignet für die Bemessung, zur Produktionskontrolle und zur Aufnahme in Produktspezifikationen.

Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de transmission de la vapeur d'eau (ISO 12572:2001)

La présente norme spécifie une méthode basée sur des essais en coupelle pour déterminer la perméance à la vapeur d'eau des produits pour le bâtiment ainsi que la perméabilité à la vapeur d'eau des matériaux pour le bâtiment dans des conditions isothermes. Différentes séries de conditions d'essai sont spécifiées. Les principes généraux sont applicables à tous les matériaux et produits de bâtiment hygroscopiques et non hygroscopiques, y compris ceux qui possèdent des parements et des revêtements intégrés. Les annexes fournissent des détails sur des méthodes d'essai convenant pour différents types de matériaux. La présente norme ne s'applique pas dans le cas d'éprouvettes dont l'épaisseur d'air équivalente pour la diffusion de la vapeur d'eau est inférieure à 0,1 m, du fait de l'incertitude croissante sur les résultats de mesure. Si l'épaisseur d'air équivalente mesurée est supérieure à 1 500 m, le matériau peut être considéré comme imperméable. Les résultats obtenus par cette méthode peuvent être utilisés pour la conception, pour le contrôle de la production et pour insertion dans les spécifications de produits.

Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje lastnosti za prehod vodne pare (ISO 12572:2001)

General Information

Status
Withdrawn
Publication Date
14-Jun-2001
Withdrawal Date
23-Aug-2016
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
24-Aug-2016

Relations

Buy Standard

Standard
EN ISO 12572:2002
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12572:2002
01-marec-2002
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje
lastnosti za prehod vodne pare (ISO 12572:2001)
Hygrothermal performance of building materials and products - Determination of water
vapour transmission properties (ISO 12572:2001)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung der Wasserdampfdurchlässigkeit (ISO 12572:2001)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
des propriétés de transmission de la vapeur d'eau (ISO 12572:2001)
Ta slovenski standard je istoveten z: EN ISO 12572:2001
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
91.120.30 =DãþLWDSUHGYODJR Waterproofing
SIST EN ISO 12572:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12572:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 12572:2002
EUROPEAN STANDARD
EN ISO 12572
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 91.120.10
English version
Hygrothermal performance of building materials and products -
Determination of water vapour transmission properties (ISO
12572:2001)
Performance hygrothermique des matériaux et produits Wärme- und feuchtetechnisches Verhalten von Baustoffen
pour le bâtiment - Détermination des propriétés de und Bauprodukten - Bestimmung der
transmission de la vapeur d'eau (ISO 12572:2001) Wasserdampfdurchlässigkeit (ISO 12572:2001)
This European Standard was approved by CEN on 18 October 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12572:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12572:2002
Page 2
EN ISO 12572:2001
Contents
Page
Foreword 3
1 Scope 4
2 Normative references 4
3 Definitions, symbols and units 5
4 Principle 7
5 Apparatus 7
6 Test specimens 8
7 Procedure 10
8  Calculation and expression of results 13
9 Accuracy of measurement 15
10 Test report 17
Annex A (normative) Methods suitable for self supporting materials 19
Annex B (normative) Methods suitable for loose fills 21
Annex C (normative) Methods suitable for membranes and foils 23
Annex D (normative) Methods suitable for mastics and sealants 24
Annex E (normative) Methods suitable for paint, varnishes, etc. 26
Annex F (normative) Correction for the effect of a masked edge of a specimen 27
Annex G (normative) Correction for resistance of air layers 28
Annex H (informative) Weighing repeatability, weighing interval and specimen size needed
to achieve desired accuracy 29
Annex J (informative) Conversion table for water vapour transmission units 30
ANNEX ZA (normative) Normative references to international publications with their
relevant European publications 31
ANNEX ZB (informative) Informative references to international publications with their
relevant European publications 31
Bibliography 32

---------------------- Page: 4 ----------------------

SIST EN ISO 12572:2002
Page 3
EN ISO 12572:2001
Foreword
The text of EN ISO 12572:2001 has been prepared by Technical Committee CEN/TC 89
"Thermal performance of buildings and building components", the secretariat of which is held
by SIS, in collaboration with Technical Committee ISO/TC 163 "Thermal insulation".
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by December 2001, and conflicting
national standards shall be withdrawn at the latest by December 2001.
This standard is one of a series of standards which specify test methods for the thermal and
moisture related properties of building materials and products.
The European publications to be used instead of the International Standards listed in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.