Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)

This document prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864‑1 and the design of the graphical symbols is according to ISO 3864‑3.
This document is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this document and of the ISO 3864 series.
This document specifies the safety sign originals that can be scaled for reproduction and application purposes.

Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO 7010:2019, korrigierte Fassung 2020-06)

Dieses Dokument legt Sicherheitszeichen fest, die für den Zweck der Unfallverhütung, des Brandschutzes, des Schutzes vor Gesundheitsgefährdungen und für Fluchtwege angewendet werden.
Die Form und Farbe der Sicherheitszeichen entsprechen ISO 3864 1 und die Gestaltung der graphischen Symbole entspricht ISO 3864 3.
Dieses Dokument gilt für alle Stellen und Bereiche, an denen Sicherheitsfragen für Personen geregelt werden müssen. Sie gilt nicht für die Zeichengebung im Eisenbahn-, Straßen-, Binnenschiffs-, See- und Luftverkehr; allgemein gesagt, nicht in solchen Bereichen, die Regelungen unterliegen, die von diesem Dokument und den Normen der Reihe ISO 3864 abweichen können.
Dieses Dokument legt die Sicherheitszeichen Urbilder fest, die für die Reproduktion und Anwendung in der Größe angepasst werden können.

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés (ISO 7010:2019, Version corrigée 2020-06)

Le présent document prescrit les signaux de sécurité à utiliser dans le cadre de la prévention des accidents, de la lutte contre l'incendie, de l'information sur les risques d'atteinte à la santé et de l'évacuation d'urgence.
La forme et la couleur de chaque signal de sécurité sont conformes à l'ISO 3864‑1 et la conception des symboles graphiques est conforme à l'ISO 3864‑3.
Le présent document s'applique dans tous les lieux et secteurs où des questions relatives à la sécurité des personnes sont susceptibles de se poser. Il n'est toutefois pas applicable à la signalisation utilisée dans le trafic ferroviaire, routier, fluvial, maritime et aérien, ni d'une manière générale, aux secteurs qui sont soumis à une réglementation pouvant différer en certains points du présent document et de la série de normes ISO 3864.
Le présent document spécifie des originaux de signaux de sécurité qui peuvent être réduits ou agrandis pour des besoins de reproduction et d'application.

Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki (ISO 7010:2019, popravljena verzija 2020-06)

General Information

Status
Published
Publication Date
24-Mar-2020
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
25-Mar-2020
Completion Date
25-Mar-2020

RELATIONS

Buy Standard

Standard
EN ISO 7010:2020 - BARVE: PDF-str: 22-309
English language
307 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 7010:2020 - BARVE: PDF 22-309
English language
307 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 7010:2020
01-junij-2020
Nadomešča:
SIST EN ISO 7010:2012
SIST EN ISO 7010:2012/A1:2014
SIST EN ISO 7010:2012/A2:2014
SIST EN ISO 7010:2012/A3:2014
SIST EN ISO 7010:2012/A4:2014
SIST EN ISO 7010:2012/A5:2015
SIST EN ISO 7010:2012/A6:2017
SIST EN ISO 7010:2012/A7:2017

Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki

(ISO 7010:2019, popravljena verzija 2020-06)

Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO

7010:2019, Corrected version 2020-06)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2019, korrigierte Fassung 2020-06)

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité

enregistrés (ISO 7010:2019, Version corrigée 2020-06)
Ta slovenski standard je istoveten z: EN ISO 7010:2020
ICS:
01.080.10 Simboli za javno obveščanje. Public information symbols.
Znaki. Table. Označbe Signs. Plates. Labels
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
SIST EN ISO 7010:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7010:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 7010:2020
EN ISO 7010
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 01.080.10; 01.080.20 Supersedes EN ISO 7010:2012
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs (ISO 7010:2019, Corrected version
2020-06)

Symboles graphiques - Couleurs de sécurité et signaux Graphische Symbole - Sicherheitsfarben und

de sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen

7010:2019, Version corrigée 2020-06) (ISO 7010:2019, korrigierte Fassung 2020-06)

This European Standard was approved by CEN on 14 March 2020.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 01 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7010:2020
EN ISO 7010:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 7010:2020
EN ISO 7010:2020 (E)
European foreword

The text of ISO 7010:2019, Corrected version 2020-06 has been prepared by Technical Committee

ISO/TC 145 "Graphical symbols” of the International Organization for Standardization (ISO) and has

been taken over as EN ISO 7010:2020 by Technical Committee CEN/SS F16 “Graphical symbols” the

secretariat of which is held by CCMC.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by September 2020, and conflicting national standards

shall be withdrawn at the latest by September 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 7010:2012.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 7010:2019, Corrected version 2020-06 has been approved by CEN as EN ISO 7010:2020

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 7010:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 7010:2020
INTERNATIONAL ISO
STANDARD 7010
Third edition
2019-07
Corrected version
2020-06
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
Reference number
ISO 7010:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ................................................................................................................................................................................................................................vi

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Referents and categorization of safety signs ........................................................................................................................... 2

4.1 General ........................................................................................................................................................................................................... 2

4.2 Referent (safety meaning) ............................................................................................................................................................. 2

4.3 Categorization of safety signs .................................................................................................................................................... 8

5 Registered safety signs ................................................................................................................................................................................... 9

Bibliography .........................................................................................................................................................................................................................298

© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee

SC 2, Safety identification, signs, shapes, symbols and colours.

This third edition cancels and replaces the second edition (ISO 7010:2011), which has been technically

revised. The main changes to the previous edition are as follows:
The safety signs from
— ISO 7010:2011/Amd 1:2012,
— ISO 7010:2011/Amd 2:2012,
— ISO 7010:2011/Amd 3:2012,
— ISO 7010:2011/Amd 4:2013,
— ISO 7010:2011/Amd 5:2014,
— ISO 7010:2011/Amd 6:2014,
— ISO 7010:2011/Amd 7:2016,
— ISO 7010:2011/Amd 8:2017,
— ISO 7010:2011/Amd 9:2018 and
— ISO 20712-1:2008
have been incorporated with a few minor text adjustments.
This edition also cancels and replaces ISO 20712-1:2008.

All safety signs are available on the ISO Online browsing platform at https:// www .iso .org/ obp.

iv © ISO 2019 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.

This corrected version of ISO 7010:2019 incorporates the following corrected safety signs:

— mandatory action signs: M053 and M054;
— prohibition signs: P048 to P052, P054, P055, P057 to P059, P061 to P066;

— warning signs: W043, W045 to W050, W052, W053, W057, W058, W060 to W063, W065, W066.

© ISO 2019 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Introduction

There is a need to standardize a system of providing safety information that relies as little as possible

on the use of words to achieve understanding.

Continued growth in international trade, travel and mobility of labour requires a common method of

communicating safety information.
Lack of standardization may lead to confusion and the risk of accidents.

The use of standardized safety signs does not replace proper work methods, instructions and accident

prevention training or measures. Education is an essential part of any system that provides safety

information.

The safety signs are intended for use only where there is a risk to people. They may appear in safety

signage in workplaces and public areas, safety manuals and notices, product labelling and escape and

evacuation plans, as appropriate.

This document is intended to be used by all Technical Committees within ISO charged with developing

specific safety signing for their industry, to ensure that there is only one safety sign for each safety

meaning. It is also intended that this document be revised regularly to include safety signs as they are

standardized by ISO, and which conform to the design principles given in the ISO 3864 series.

The safety signs in this document have been validated by ISO/TC 145/SC 2 according to procedures of

standardization current at the time of publication.

NOTE 1 Some countries' statutory regulations might differ in some respects from those given in this

document.

NOTE 2 Information on procedures, criteria of acceptability, safety sign templates and application of safety

signs, as well as translations of the referents, can be found at http:// www .iso .org/ tc145/ sc2.

vi © ISO 2019 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 7010:2020
INTERNATIONAL STANDARD ISO 7010:2019(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs

IMPORTANT — The colours represented in the electronic file of this document can be neither

viewed on screen nor printed as true representations. For the purposes of colour matching,

see ISO 3864-4 which provides colorimetric and photometric properties together with, as a

guideline, references from colour order systems.
1 Scope

This document prescribes safety signs for the purposes of accident prevention, fire protection, health

hazard information and emergency evacuation.

The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical

symbols is according to ISO 3864-3.

This document is applicable to all locations where safety issues related to people need to be addressed.

However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic

and, in general, to those sectors subject to a regulation which may differ with regard to certain points

of this document and of the ISO 3864 series.

This document specifies the safety sign originals that can be scaled for reproduction and application

purposes.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 3864-1, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety

signs and safety markings

ISO 3864-3, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical

symbols for use in safety signs
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
image content

written description of the elements of a graphical symbol or safety sign and their relative disposition

3.2
referent
idea or object that a graphical symbol is intended to represent
© ISO 2019 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
3.3
safety sign

sign giving a general safety message, obtained by a combination of a colour and geometric shape and

which, by the addition of a graphical symbol, gives a particular safety message
3.4
safety sign original

safety sign with which a referent, a graphical representation and a description of the application are

associated
3.5
supplementary sign

sign that is supportive of another sign and the main purpose of which is to provide additional

clarification
4 Referents and categorization of safety signs
4.1 General

The summaries in 4.2 and 4.3 are provided to facilitate the search for registered safety signs.

This document will be maintained electronically through the use of a database. The indexes of this

database will be used in these summaries as search engines with each registered safety sign having a

unique reference number.
4.2 Referent (safety meaning)

Table 1 gives the list of referents in alphabetical order and provides the safety sign functional

reference number.
Table 1 — Summary of referents in alphabetical order
Referent (safety meaning) Functional reference number
Alighting from toboggan to the left M050
Alighting from toboggan to the right M051
Arc flash; warning W042
Asphyxiating atmosphere; warning W041
Automated external heart defibrillator E010
Automatic start-up; warning W018
Barbed wire; warning W033
Battery charging; warning W026
Biological hazard; warning W009
Boating area; warning W058
Break to obtain access E008
Bull; warning W034
Check guard M027
Child seat presence and orientation detection system (CPOD) E014
Child's lifejacket E045
Close and secure hatches in launch sequence M037
Close safety bar of chairlift M033
Connect an earth terminal to the ground M005
Corrosive substance; warning W023
2 © ISO 2019 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Counterrotating rollers; warning W025
Crocodiles, alligators or caymans; warning W067
Crushing; warning W019
Crushing of hands; warning W024
Davit-launched liferaft E039
Deep shelving beach; warning W066
Deep water; warning W047
Disconnect before carrying out maintenance or repair M021
Disconnect mains plug from electrical outlet M006
Doctor E009
Do not alter the state of the switch P031
Do not expose to direct sunlight or hot surface P068
Do not extinguish with water P011
Do not leave the tow-track P037
Do not obstruct P023
Do not put finger into the nozzle of a hydromassage P070
Do not ram into toboggans P047
Do not set off fireworks P040
Do not spray with water P016
Do not stretch out of toboggan P046
Do not swing the chair P038
Do not tie knots in rope P030
Do not touch P010
Do not use for face grinding P032
Do not use for wet grinding P033
Do not use lift in the event of fire P020
Do not use this device in a bathtub, shower or water-filled reservoir P026
Do not use this incomplete scaffold P025
Do not use this lift for people P027
Do not use with hand-held grinding machine P034
Do not walk or stand here P024
Do not wear gloves P028
Do not wear metal-studded footwear P035
Door opens by pulling on the left-hand side E057
Door opens by pulling on the right-hand side E058
Door opens by pushing on the left-hand side E022
Door opens by pushing on the right-hand side E023
Door slides left to open E034
Door slides right to open E033
Drinking water E015
Drop (fall); warning W008
Electricity; warning W012
Embarkation ladder E053
Emergency escape breathing device E029
© ISO 2019 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Emergency exit (left hand) E001
Emergency exit (right hand) E002
Emergency exit for people unable to walk or with walking E026
impairment (left)
Emergency exit for people unable to walk or with walking E030
impairment (right)
Emergency hammer E025
Emergency position indicating radio beacon E052
Emergency stop button E020
Emergency telephone E004
Emergency window with escape ladder E016
Escape ladder E059
Evacuation assembly point E007
Evacuation chair E060
Evacuation temporary refuge E024
Explosive material; warning W002
Eyewash station E011
Falling ice; warning W039
Falling objects; warning W035
Fire alarm call point F005
Fire blanket F016
Fire emergency telephone F006
Fire extinguisher F001
Firefighting equipment, collection of F004
Fire hose reel F002
Fire monitor F015
Fire ladder F003
Fire protection door F007
First aid E003
Fixed fire extinguishing battery F008
Fixed fire extinguishing bottle F013
Fixed fire extinguishing installation F012
Flammable material; warning W021
Floor-level obstacle; warning W007
Forklift trucks and other industrial vehicles; warning W014
Fragile roof; warning W036
General mandatory action sign M001
General prohibition sign P001
General warning sign W001
Guard dog; warning W013
Hand crushing between press brake and material; warning W031
Hand crushing between press brake tool; warning W030
High surf or large breaking waves; warning W065
Hot surface; warning W017
4 © ISO 2019 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Hot works prohibited P039
Immediately leave the tow-track in the event of falling M035
Incoming tides; warning W060
Infant's lifejacket E046
Keep children under supervision in the aquatic environment M054
Keep distance between toboggans M052
Keep locked M028
Kite surfing; warning W062
Laser beam; warning W004
Lifeboat E036
Lifebuoy E040
Lifebuoy with light E042
Lifebuoy with line E041
Lifebuoy with line and light E043
Lifejacket E044
Liferaft E038
Liferaft knife E035
Lift ski tips M036
Line-throwing appliance E050
Low temperature/freezing conditions; warning W010
Lower lifeboat to the water in launch sequence M039
Lower liferaft to the water in launch sequence M040
Lower rescue boat to the water in launch sequence M041
Magnetic field; warning W006
Marine evacuation chute E055
Marine evacuation slide E054
Medical grab bag E027
No access for forklift trucks and other industrial vehicles P006
No access for people with active implanted cardiac devices P007
No access for people with metallic implants P014
No activated mobile phones P013
No body boarding P063
No children allowed P036
No climbing P009
No diving P052
No dogs P021
No eating or drinking P022
No heavy load P012
No jumping into water P061
No kite surfing P065
No leaning against P041
No manually powered craft P055
No mechanically powered craft P056
No metallic articles or watches P008
© ISO 2019 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
No open flame; Fire, open ignition source and smoking prohibited P003
No outdoor footwear P060
No parasailing P066
No personal water craft P057
No photography P029
No pushing P017
No pushing into water P062
No reaching in P015
No running P048
No sailing P053
No sand yachting P067
No sitting P018
No smoking P002
No snorkelling P050
No stepping on surface P019
No sub-aqua diving P051
No surf craft P059
No surfing between the red-and-yellow flags P064
No swimming P049
No thoroughfare P004
No towed water activity P058
No windsurfing P054
Non-ionizing radiation; warning W005
Not drinking water P005
Not for people in the state of intoxication P043
Not for pregnant women P042
Not to be serviced by users P069
Opaque eye protection must be worn M007
Open safety bar of chairlift M034
Optical radiation; warning W027
Overhead load; warning W015
Overhead obstacle; warning W020
Oxidizing substance; warning W028
Oxygen resuscitator E028
Parasailing; warning W063
Portable foam applicator unit F010
Pressurized cylinder; warning W029
Protect infant's eyes with opaque eye protection M025
Protection shelter E021
Quicksand or mud/deep mud or silt; warning W061
Radioactive material or ionizing radiation; warning W003
Rapid movement of workpiece in press brake; warning W032
Refer to instruction manual/booklet M002
Remote release station F014
6 © ISO 2019 – All rights reserved
---------------------- Page: 18 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Release falls in launch sequence M042
Release lifeboat gripes in launch sequence M045
Rescue boat E037
Rescue window E017
Rocket parachute flare E049
Roof avalanche; warning W040
Run over by remote operator-controlled machine; warning W037
Safety shower E012
Sand yachting; warning W059
Search and rescue transponder E047
Secure gas cylinders M046
Sewage effluent outfall; warning W055
Shallow water (diving); warning W048
Sharks; warning W054
Sharp element; warning W022
Shipboard assembly station E032
Shipboard general alarm E031
Slippery surface; warning W011
Slipway; warning W044
Sound horn M029
Start air supply in launch sequence M044
Start engine in launch sequence M038
Start water spray in launch sequence M043
Stretcher E013
Strong currents; warning W057
Strong winds; warning W064
Submerged objects; warning W049
Sudden drop in swimming or leisure pools; warning W050
Sudden loud noise; warning W038
Surf craft area; warning W046
Survival clothing E056
Survival craft distress signals E048
Thin ice; warning W043
Towed water activity area; warning W045
Toxic material; warning W016
Tsunami evacuation area E062
Tsunami evacuation building E063
Tsunami hazard zone; warning W056
Turn anticlockwise to open E018
Turn clockwise to open E019
Two-way VHF radiotelephone apparatus E051
Unprotected edges; warning W051
Unstable cliff; warning W053
Unstable cliff edge; warning W052
© ISO 2019 – All rights reserved 7
---------------------- Page: 19 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Use barrier cream M022
Use footbridge M023
Use gas detector M048
Use handrail M012
Use litter bin M030
Use of smart glasses prohibited P044
Use protective apron M026
Use self-contained breathing appliance M047
Use table saw adjustable guard M031
Use this walkway M024
Wash your hands M011
Water fog applicator F011
Water life-saving equipment E061
Wear anti-static footwear M032
Wear ear protection M003
Wear eye protection M004
Wear a face shield M013
Wear head protection M014
Wear high-visibility clothing M015
Wear a mask M016
Wear personal flotation devices M053
Wear protective clothing M010
Wear protective gloves M009
Wear protective roller sport equipment M049
Wear respiratory protection M017
Wear safety belts M020
Wear safety footwear M008
Wear a safety harness M018
Wear a welding mask M019
Wheeled fire extinguisher F009
4.3 Categorization of safety signs
Safety signs are categorized according to their function as follows:

— E is the category for signs indicating an evacuation route, the location of safety equipment or a

safety facility, or a safety action (safe condition signs);
— F is the category for fire equipment signs;
— M is the category for mandatory action signs;
— P is the category for prohibition signs;
— W is the category for warning signs.

Table 2 summarizes the registered safety signs in terms of safety sign category in accordance with

ISO 3864-1.
8 © ISO 2019 – All rights reserved
---------------------- Page: 20 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
5 Registered safety signs

Tables 3 to 7 give safety sign originals in a uniform 70 mm size with corner marks to enable accurate

enlargement and reduction scaling. The sign illustrations are shown without borders in order to allow for

consistent reproduction scaling, though a border can be useful to achieve a luminance contrast between

the safety sign and its background when mounted or displayed. The safety signs should be reproduced

exactly as shown in Tables 3 to 7. However, some degree of graphical modification is permitted when

cultural differences or special application formats need to be considered, provided the original meaning

is retained and comprehension of the safety sign is maintained. Consistent reproduction and use of these

safety signs will lead to a progressively improved degree of comprehension at the international level.

In cases where the orientation of the graphical symbol is not essential to the meaning of the safety sign,

the graphical symbol may be reproduced in a mirrored form. For prohibition signs, it is essential that

the prohibition bar does not obscure significant details of the graphical symbol.

NOTE The graphical symbol is the complete image containing all the graphical symbol elements as shown in

...

SLOVENSKI STANDARD
SIST EN ISO 7010:2020
01-junij-2020
Nadomešča:
SIST EN ISO 7010:2012
SIST EN ISO 7010:2012/A1:2014
SIST EN ISO 7010:2012/A2:2014
SIST EN ISO 7010:2012/A3:2014
SIST EN ISO 7010:2012/A4:2014
SIST EN ISO 7010:2012/A5:2015
SIST EN ISO 7010:2012/A6:2017
SIST EN ISO 7010:2012/A7:2017

Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki

(ISO 7010:2019)

Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO

7010:2019)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2019)

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité

enregistrés (ISO 7010:2019)
Ta slovenski standard je istoveten z: EN ISO 7010:2020
ICS:
01.080.10 Simboli za javno obveščanje. Public information symbols.
Znaki. Table. Označbe Signs. Plates. Labels
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
SIST EN ISO 7010:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7010:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 7010:2020
EN ISO 7010
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 01.080.10; 01.080.20 Supersedes EN ISO 7010:2012
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs (ISO 7010:2019)

Symboles graphiques - Couleurs de sécurité et signaux Graphische Symbole - Sicherheitsfarben und

de sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen

7010:2019) (ISO 7010:2019)
This European Standard was approved by CEN on 14 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7010:2020
EN ISO 7010:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 7010:2020
EN ISO 7010:2020 (E)
European foreword

The text of ISO 7010:2019 has been prepared by Technical Committee ISO/TC 145 "Graphical symbols”

of the International Organization for Standardization (ISO) and has been taken over as

EN ISO 7010:2020 by Technical Committee CEN/SS F16 “Graphical symbols” the secretariat of which is

held by CCMC.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by September 2020, and conflicting national standards

shall be withdrawn at the latest by September 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 7010:2012.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 7010:2019 has been approved by CEN as EN ISO 7010:2020 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 7010:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 7010:2020
INTERNATIONAL ISO
STANDARD 7010
Third edition
2019-07
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
Reference number
ISO 7010:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ................................................................................................................................................................................................................................vi

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Referents and categorization of safety signs ........................................................................................................................... 2

4.1 General ........................................................................................................................................................................................................... 2

4.2 Referent (safety meaning) ............................................................................................................................................................. 2

4.3 Categorization of safety signs .................................................................................................................................................... 8

5 Registered safety signs ................................................................................................................................................................................... 9

Bibliography .........................................................................................................................................................................................................................298

© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso

.org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee

SC 2, Safety identification, signs, shapes, symbols and colours.

This third edition cancels and replaces the second edition (ISO 7010:2011). The following changes have

been made with respect to the previous edition:
The safety signs from
— ISO 7010:2011/Amd 1:2012,
— ISO 7010:2011/Amd 2:2012,
— ISO 7010:2011/Amd 3:2012,
— ISO 7010:2011/Amd 4:2013,
— ISO 7010:2011/Amd 5:2014,
— ISO 7010:2011/Amd 6:2014,
— ISO 7010:2011/Amd 7:2016,
— ISO 7010:2011/Amd 8:2017,
— ISO 7010:2011/Amd 9:2018,
— ISO 7010:2011/DAmd 240:2018,
— ISO 7010:2011/DAmd 241:2018,
— ISO 7010:2011/DAmd 242:2018 and
— ISO 20712-1:2008
iv © ISO 2019 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
have been incorporated with a few minor text adjustments.
This edition also cancels and replaces ISO 20712-1:2008.

All safety signs are available on the ISO Online browsing platform at https: //www .iso .org/obp.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
© ISO 2019 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Introduction

There is a need to standardize a system of providing safety information that relies as little as possible

on the use of words to achieve understanding.

Continued growth in international trade, travel and mobility of labour requires a common method of

communicating safety information.
Lack of standardization may lead to confusion and the risk of accidents.

The use of standardized safety signs does not replace proper work methods, instructions and accident

prevention training or measures. Education is an essential part of any system that provides safety

information.

The safety signs are intended for use only where there is a risk to people. They may appear in safety

signage in workplaces and public areas, safety manuals and notices, product labelling and escape and

evacuation plans, as appropriate.

This document is intended to be used by all Technical Committees within ISO charged with developing

specific safety signing for their industry, to ensure that there is only one safety sign for each safety

meaning. It is also intended that this document be revised regularly to include safety signs as they are

standardized by ISO, and which conform to the design principles given in the ISO 3864 series.

The safety signs in this document have been validated by ISO/TC 145/SC 2 according to procedures of

standardization current at the time of publication.

NOTE 1 Some countries' statutory regulations might differ in some respects from those given in this

document.

NOTE 2 Information on procedures, criteria of acceptability, safety sign templates and application of safety

signs, as well as translations of the referents, can be found at http: //www .iso .org/tc145/sc2.

vi © ISO 2019 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 7010:2020
INTERNATIONAL STANDARD ISO 7010:2019(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs

IMPORTANT — The colours represented in the electronic file of this document can be neither

viewed on screen nor printed as true representations. For the purposes of colour matching,

see ISO 3864-4 which provides colorimetric and photometric properties together with, as a

guideline, references from colour order systems.
1 Scope

This document prescribes safety signs for the purposes of accident prevention, fire protection, health

hazard information and emergency evacuation.

The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical

symbols is according to ISO 3864-3.

This document is applicable to all locations where safety issues related to people need to be addressed.

However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic

and, in general, to those sectors subject to a regulation which may differ with regard to certain points

of this document and of the ISO 3864 series.

This document specifies the safety sign originals that can be scaled for reproduction and application

purposes.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 3864-1, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety

signs and safety markings

ISO 3864-3, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical

symbols for use in safety signs
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
3.1
image content

written description of the elements of a graphical symbol or safety sign and their relative disposition

3.2
referent
idea or object that a graphical symbol is intended to represent
© ISO 2019 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
3.3
safety sign

sign giving a general safety message, obtained by a combination of a colour and geometric shape and

which, by the addition of a graphical symbol, gives a particular safety message
3.4
safety sign original

safety sign with which a referent, a graphical representation and a description of the application are

associated
3.5
supplementary sign

sign that is supportive of another sign and the main purpose of which is to provide additional

clarification
4 Referents and categorization of safety signs
4.1 General

The summaries in 4.2 and 4.3 are provided to facilitate the search for registered safety signs.

This document will be maintained electronically through the use of a database. The indexes of this

database will be used in these summaries as search engines with each registered safety sign having a

unique reference number.
4.2 Referent (safety meaning)

Table 1 gives the list of referents in alphabetical order and provides the safety sign functional

reference number.
Table 1 — Summary of referents in alphabetical order
Referent (safety meaning) Functional reference number
Alighting from toboggan to the left M050
Alighting from toboggan to the right M051
Arc flash; warning W042
Asphyxiating atmosphere; warning W041
Automated external heart defibrillator E010
Automatic start-up; warning W018
Barbed wire; warning W033
Battery charging; warning W026
Biological hazard; warning W009
Boating area; warning W058
Break to obtain access E008
Bull; warning W034
Check guard M027
Child seat presence and orientation detection system (CPOD) E014
Child's lifejacket E045
Close and secure hatches in launch sequence M037
Close safety bar of chairlift M033
Connect an earth terminal to the ground M005
Corrosive substance; warning W023
2 © ISO 2019 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Counterrotating rollers; warning W025
Crocodiles, alligators or caymans; warning W067
Crushing; warning W019
Crushing of hands; warning W024
Davit-launched liferaft E039
Deep shelving beach; warning W066
Deep water; warning W047
Disconnect before carrying out maintenance or repair M021
Disconnect mains plug from electrical outlet M006
Doctor E009
Do not alter the state of the switch P031
Do not expose to direct sunlight or hot surface P068
Do not extinguish with water P011
Do not leave the tow-track P037
Do not obstruct P023
Do not put finger into the nozzle of a hydromassage P070
Do not ram into toboggans P047
Do not set off fireworks P040
Do not spray with water P016
Do not stretch out of toboggan P046
Do not swing the chair P038
Do not tie knots in rope P030
Do not touch P010
Do not use for face grinding P032
Do not use for wet grinding P033
Do not use lift in the event of fire P020
Do not use this device in a bathtub, shower or water-filled reservoir P026
Do not use this incomplete scaffold P025
Do not use this lift for people P027
Do not use with hand-held grinding machine P034
Do not walk or stand here P024
Do not wear gloves P028
Do not wear metal-studded footwear P035
Door opens by pulling on the left-hand side E057
Door opens by pulling on the right-hand side E058
Door opens by pushing on the left-hand side E022
Door opens by pushing on the right-hand side E023
Door slides left to open E034
Door slides right to open E033
Drinking water E015
Drop (fall); warning W008
Electricity; warning W012
Embarkation ladder E053
Emergency escape breathing device E029
© ISO 2019 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Emergency exit (left hand) E001
Emergency exit (right hand) E002
Emergency exit for people unable to walk or with walking E026
impairment (left)
Emergency exit for people unable to walk or with walking E030
impairment (right)
Emergency hammer E025
Emergency position indicating radio beacon E052
Emergency stop button E020
Emergency telephone E004
Emergency window with escape ladder E016
Escape ladder E059
Evacuation assembly point E007
Evacuation chair E060
Evacuation temporary refuge E024
Explosive material; warning W002
Eyewash station E011
Falling ice; warning W039
Falling objects; warning W035
Fire alarm call point F005
Fire blanket F016
Fire emergency telephone F006
Fire extinguisher F001
Firefighting equipment, collection of F004
Fire hose reel F002
Fire monitor F015
Fire ladder F003
Fire protection door F007
First aid E003
Fixed fire extinguishing battery F008
Fixed fire extinguishing bottle F013
Fixed fire extinguishing installation F012
Flammable material; warning W021
Floor-level obstacle; warning W007
Forklift trucks and other industrial vehicles; warning W014
Fragile roof; warning W036
General mandatory action sign M001
General prohibition sign P001
General warning sign W001
Guard dog; warning W013
Hand crushing between press brake and material; warning W031
Hand crushing between press brake tool; warning W030
High surf or large breaking waves; warning W065
Hot surface; warning W017
4 © ISO 2019 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Hot works prohibited P039
Immediately leave the tow-track in the event of falling M035
Incoming tides; warning W060
Infant's lifejacket E046
Keep children under supervision in the aquatic environment M054
Keep distance between toboggans M052
Keep locked M028
Kite surfing; warning W062
Laser beam; warning W004
Lifeboat E036
Lifebuoy E040
Lifebuoy with light E042
Lifebuoy with line E041
Lifebuoy with line and light E043
Lifejacket E044
Liferaft E038
Liferaft knife E035
Lift ski tips M036
Line-throwing appliance E050
Low temperature/freezing conditions; warning W010
Lower lifeboat to the water in launch sequence M039
Lower liferaft to the water in launch sequence M040
Lower rescue boat to the water in launch sequence M041
Magnetic field; warning W006
Marine evacuation chute E055
Marine evacuation slide E054
Medical grab bag E027
No access for forklift trucks and other industrial vehicles P006
No access for people with active implanted cardiac devices P007
No access for people with metallic implants P014
No activated mobile phones P013
No body boarding P063
No children allowed P036
No climbing P009
No diving P052
No dogs P021
No eating or drinking P022
No heavy load P012
No jumping into water P061
No kite surfing P065
No leaning against P041
No manually powered craft P055
No mechanically powered craft P056
No metallic articles or watches P008
© ISO 2019 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
No open flame; Fire, open ignition source and smoking prohibited P003
No outdoor footwear P060
No parasailing P066
No personal water craft P057
No photography P029
No pushing P017
No pushing into water P062
No reaching in P015
No running P048
No sailing P053
No sand yachting P067
No sitting P018
No smoking P002
No snorkelling P050
No stepping on surface P019
No sub-aqua diving P051
No surf craft P059
No surfing between the red-and-yellow flags P064
No swimming P049
No thoroughfare P004
No towed water activity P058
No windsurfing P054
Non-ionizing radiation; warning W005
Not drinking water P005
Not for people in the state of intoxication P043
Not for pregnant women P042
Not to be serviced by users P069
Opaque eye protection must be worn M007
Open safety bar of chairlift M034
Optical radiation; warning W027
Overhead load; warning W015
Overhead obstacle; warning W020
Oxidizing substance; warning W028
Oxygen resuscitator E028
Parasailing; warning W063
Portable foam applicator unit F010
Pressurized cylinder; warning W029
Protect infant's eyes with opaque eye protection M025
Protection shelter E021
Quicksand or mud/deep mud or silt; warning W061
Radioactive material or ionizing radiation; warning W003
Rapid movement of workpiece in press brake; warning W032
Refer to instruction manual/booklet M002
Remote release station F014
6 © ISO 2019 – All rights reserved
---------------------- Page: 18 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Release falls in launch sequence M042
Release lifeboat gripes in launch sequence M045
Rescue boat E037
Rescue window E017
Rocket parachute flare E049
Roof avalanche; warning W040
Run over by remote operator-controlled machine; warning W037
Safety shower E012
Sand yachting; warning W059
Search and rescue transponder E047
Secure gas cylinders M046
Sewage effluent outfall; warning W055
Shallow water (diving); warning W048
Sharks; warning W054
Sharp element; warning W022
Shipboard assembly station E032
Shipboard general alarm E031
Slippery surface; warning W011
Slipway; warning W044
Sound horn M029
Start air supply in launch sequence M044
Start engine in launch sequence M038
Start water spray in launch sequence M043
Stretcher E013
Strong currents; warning W057
Strong winds; warning W064
Submerged objects; warning W049
Sudden drop in swimming or leisure pools; warning W050
Sudden loud noise; warning W038
Surf craft area; warning W046
Survival clothing E056
Survival craft distress signals E048
Thin ice; warning W043
Towed water activity area; warning W045
Toxic material; warning W016
Tsunami evacuation area E062
Tsunami evacuation building E063
Tsunami hazard zone; warning W056
Turn anticlockwise to open E018
Turn clockwise to open E019
Two-way VHF radiotelephone apparatus E051
Unprotected edges; warning W051
Unstable cliff; warning W053
Unstable cliff edge; warning W052
© ISO 2019 – All rights reserved 7
---------------------- Page: 19 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
Table 1 (continued)
Referent (safety meaning) Functional reference number
Use barrier cream M022
Use footbridge M023
Use gas detector M048
Use handrail M012
Use litter bin M030
Use of smart glasses prohibited P044
Use protective apron M026
Use self-contained breathing appliance M047
Use table saw adjustable guard M031
Use this walkway M024
Wash your hands M011
Water fog applicator F011
Water life-saving equipment E061
Wear anti-static footwear M032
Wear ear protection M003
Wear eye protection M004
Wear a face shield M013
Wear head protection M014
Wear high-visibility clothing M015
Wear a mask M016
Wear personal flotation devices M053
Wear protective clothing M010
Wear protective gloves M009
Wear protective roller sport equipment M049
Wear respiratory protection M017
Wear safety belts M020
Wear safety footwear M008
Wear a safety harness M018
Wear a welding mask M019
Wheeled fire extinguisher F009
4.3 Categorization of safety signs
Safety signs are categorized according to their function as follows:

— E is the category for signs indicating an evacuation route, the location of safety equipment or a

safety facility, or a safety action (safe condition signs);
— F is the category for fire equipment signs;
— M is the category for mandatory action signs;
— P is the category for prohibition signs;
— W is the category for warning signs.

Table 2 summarizes the registered safety signs in terms of safety sign category in accordance with

ISO 3864-1.
8 © ISO 2019 – All rights reserved
---------------------- Page: 20 ----------------------
SIST EN ISO 7010:2020
ISO 7010:2019(E)
5 Registered safety signs

Tables 3 to 7 give safety sign originals in a uniform 70 mm size with corner marks to enable accurate

enlargement and reduction scaling. The sign illustrations are shown without borders in order to allow for

consistent reproduction scaling, though a border can be useful to achieve a luminance contrast between

the safety sign and its background when mounted or displayed. The safety signs should be reproduced

exactly as shown in Tables 3 to 7. However, some degree of graphical modification is permitted when

cultural differences or special application formats need to be considered, provided the original meaning

is retained and comprehension of the safety sign is maintained. Consistent reproduction and use of these

safety signs will lead to a progressively improved degree of comprehension at the international level.

In cases where the orientation of the graphical symbol is not essential to the meaning of the safety sign,

the graphical symbol may be reproduced in a mirrored form. For prohibition signs, it is essential that

the prohibition bar does not obscure significant details of the graphical symbol.

NOTE The graphical symbol is the complete image containing all the graphical symbol elements as shown in

the registered safety sign.

Where a registered safety sign is not available to indicate a particular desired meaning, the meaning

shall be obtained either by developing a new safety sign following the design principles of ISO 3864-1

and ISO 3864-3 or by using the appropriate general sign (ISO 7010-M001, ISO 7010-P001, ISO 7010-

W001), together with supplementary safety information.

Tables 3 to 7 give a description of the application of each safety sign and present the safety sign originals

according to their category as follows:
— E: signs indicating an evacuation route, the location of safety
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.