EN 2435-003:2006

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance

This standard defines the requirements for a two component, chromated epoxy or polyurethane, high corrosion resistant primer with a degree of resistance to aggressive hydraulic fluids which can be used with or without a finish for aerospace applications.
The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837 and ISO 3270. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by supplementary tests to confirm that the requirements of this standard are met.

Luft- und Raumfahrt - Beschichtungsstoffe - Korrosionsbeständiger Zweikomponenten-Primer, kalthärtend, chromathaltig - Teil 003: Hohe Korrosionsbeständigkeit und hohe Beständigkeit gegen Flüssigkeiten

Diese Norm legt die Anforderungen an einen chromathaltigen Zweikomponenten Primer auf Epoxid  oder Polyurethanbasis mit hoher Korrosionsbeständigkeit und mit einem Grad an Beständigkeit gegen aggressive Hydraulikflüssigkeiten fest, der mit oder ohne Deckbeschichtung in der Luft  und Raumfahrt verwendet werden kann.
Die in dieser Norm festgelegten Eigenschaften werden anhand definierter Probenkörper aus Aluminiumlegie¬rung ermittelt, die nach EN 3837 und ISO 3270 vorbereitet werden. Die Eignung des für eine bestimmte An¬wendung zu verwendenden Materials (z. B. alternativer Trägerwerkstoff, bestimmte Trocknungsbedingungen usw.) ist durch zusätzliche Prüfungen bestimmen, um nachzuweisen, dass die Anforderungen dieser Norm erfüllt werden

Série aérospatiale - Peintures et vernis - Peinture primaire anti-corrosion chromatée, à deux composants polymérisant à température ambiante - Partie 003 : Haute résistance à la corrosion et aux fluides

Aeronavtika - Barve in laki - Dvokomponentni temeljni premaz, korozijsko obstojen, kromiran, ki se suši pri sobni temperaturi - 003. del: Visoka odpornost proti koroziji in tekočinam

General Information

• Status: Withdrawn
• Publication Date: 20-Jun-2006
• Withdrawal Date: 13-Apr-2025
• ICS: 49.040 - Coatings and related processes used in aerospace industry
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Feb-2022
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN 2435-003:2009 - Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.R]LMVNRLuft- und Raumfahrt - Beschichtungsstoffe - Korrosionsbeständiger Zweikomponenten-Primer, kalthärtend, chromathaltig - Teil 003: Hohe Korrosionsbeständigkeit und hohe Beständigkeit gegen FlüssigkeitenSérie aérospatiale - Peintures et vernis - Peinture primaire anti-corrosion chromatée, à deux composants polymérisant à température ambiante - Partie 003 : Haute résistance à la corrosion et aux fluidesAerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 2435-003:2006SIST EN 2435-003:2009en,de01-junij-2009SIST EN 2435-003:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2435-003June 2006ICS 49.040 English VersionAerospace series - Paints and varnishes - Corrosion resistantchromated two component cold curing primer - Part 003: Highcorrosion and fluid resistanceSérie aérospatiale - Peintures et vernis - Peinture primaireanti-corrosion chromatée, à deux composants polymérisantà température ambiante - Partie 003 : Haute résistance à lacorrosion et aux fluidesLuft- und Raumfahrt - Anstrichstoffe -Korrosionsbeständiger Zweikomponenten-Grundanstrich,kalthärtend, chromathaltig - Teil 003: HoheKorrosionsbeständigkeit und hohe Beständigkeit gegenFlüssigkeitenThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2435-003:2006: ESIST EN 2435-003:2009

EN 2434-003, Aerospace series — Paints and varnishes — Two component cold curing polyurethane finish — Part 04: Flexible and high fluid resistance for interior 1) EN 2709, Aerospace series — Aluminium alloy 2024-T3510 bar and section — 1,2 ≤ (a or D) ≤ 150 mm with peripheral coarse grain control1) EN 3837, Aerospace series — Paints and varnishes — Nature and method for surface preparation of test pieces in aluminium alloys1) EN 3840, Aerospace series — Paints and varnishes — Technical specification1) EN 4385, Aerospace series — Non-metallic materials — General organisation of standardisation — Links be-tween types of standards1) ISO 1513, Paints and varnishes — Examination and preparation of samples for testing ISO 3270, Paints and varnishes and their raw materials — Temperature and humidities for conditioning and testing ISO 3696, Water for analytical laboratory use — Specification and test methods TR 7000-9, Aerospace series — Non-metallic materials — Rules for the drafting and presentation of material standards — Part 9: Paints and varnishes2)
1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of the
...