EN 6059-505:2024

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 505: Lightning strike and current pulse

This document specifies a method to measure the ability of a protective sleeve to withstand specified severities of simulated lightning strikes.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 505: Blitzschlag und Stromimpuls

Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 505 : Tenue à la foudre et impulsion de courant

Le présent document spécifie une méthode pour mesurer la capacité d'une gaine de protection à résister à des foudroiements simulés de sévérités spécifiées.

Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 505. del: Udar strele ter tokovni in napetostni udar

General Information

• Status: Not Published
• Publication Date: 17-Dec-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6055 - CEN Ratification completed (DOR) - Publishing
• Start Date: 09-Sep-2024
• Completion Date: 09-Sep-2024
• Ref Project: kSIST FprEN 6059-505:2024 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 505: Lightning strike, current and voltage pulse

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 6059-505:2023
01-julij-2023
Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode -
505. del: Udar strele ter tokovni in napetostni udar
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -
Part 505: Lightning strike, current and voltage pulse
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 505: Blitzschlag, Strom- und Spannungsimpuls
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Partie 505 :
Tenue à la foudre, impulsion de tension et de courant
Ta slovenski standard je istoveten z: prEN 6059-505
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 6059-505:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 6059-505:2023
oSIST prEN 6059-505:2023
DRAFT
EUROPEAN STANDARD
prEN 6059-505
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2023
ICS 49.060
English Version
Aerospace series - Electrical cables, installation -
Protection sleeves - Test methods - Part 505: Lightning
strike, current and voltage pulse
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaines de protection - Partie 505 : Tenue à la foudre, Installation - Schutzschläuche - Prüfverfahren - Teil
impulsion de tension et de courant 505: Blitzschlag, Strom- und Spannungsimpuls
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6059-505:2023 E
worldwide for CEN national Members.

oSIST prEN 6059-505:2023
prEN 6059-505:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
4.1 Test specimen . 4
4.2 High current test . 6
5 Apparatus . 6
6 Method . 6
6.1 Pre-conditioning . 6
6.2 Procedure . 6
6.3 Final measurements . 7
7 Requirements . 7

oSIST prEN 6059-505:2023
prEN 6059-505:2023 (E)
European foreword
This document (prEN 6059-505:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
oSIST prEN 6059-505:2023
prEN 6059-
...