EN 4592:2006

Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance

This standard specifies the method of test for determining the infrared reflectance of paints and varnishes.
The test procedure determines the amount of energy reflected by the material in the range of wavelengths between 700 nanometres and 2 400 nanometres with respect to that of a standard reflectance material.
The procedure is applicable to products intended for use in aerospace applications.

Luft- und Raumfahrt - Beschichtungsstoffe - Prüfverfahren zur Messung der Infrarotemission

Diese Norm legt ein Prüfverfahren zum Ermitteln der Infrarotremission von Beschichtungsstoffen fest.
Mit diesem Prüfverfahren wird die Menge an Energie ermittelt, die vom Werkstoff in dem Wellenlängenbereich zwischen 700 nm und 2 400 nm im Vergleich zu einem Werkstoff mit genormter Remission reflektiert wird.
Dieses Prüfverfahren gilt für Produkte, die für den Einsatz in Luft- und Raumfahrtanwendungen bestimmt sind.

Série aérospatiale - Peintures et vernis - Méthode d'essai pour réflectance infrarouge

Aeronavtika - Barve in laki - Preskusne metode za ugotavljanje odbojnosti infrardečega sevanja

General Information

• Status: Published
• Publication Date: 17-Oct-2006
• Withdrawal Date: 29-Apr-2007
• ICS: 49.040 - Coatings and related processes used in aerospace industry
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 5 - Non-Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 4592:2009 - Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2009
$HURQDYWLND%DUYHLQODNL3UHVNXVQHPHWRGH]DXJRWDYOMDQMHRGERMQRVWL
LQIUDUGHþHJDVHYDQMD
Aerospace series - Paints and varnishes - Test method for determination of infrared
reflectance
Luft- und Raumfahrt - Beschichtungsstoffe - Prüfverfahren zur Messung der
Infrarotemission
Série aérospatiale - Peintures et vernis - Méthode d'essai pour réflectance infrarouge
Ta slovenski standard je istoveten z: EN 4592:2006
ICS:
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4592
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2006
ICS 49.040
English Version
Aerospace series - Paints and varnishes - Test method for
determination of infrared reflectance
Série aérospatiale - Peintures et vernis - Méthode d'essai Luft- und Raumfahrt - Anstrichstoffe - Prüfmethode zur
pour réflectance infrarouge Messung der Infrarotremission
This European Standard was approved by CEN on 21 July 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4592:2006: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.4
5 Apparatus .4
6 Specimen .5
7 Procedure .5
8 Designation .6
9 Test report .6

Foreword
This document (EN 4592:2006) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the
latest by April 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
This standard specifies the method of test for determinin
...