EN ISO 10271:2011

Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011)

ISO 10271:2011 provides test methods and procedures to determine the corrosion behaviour of metallic materials used in the oral cavity. It is intended that the test methods and procedures in ISO 10271:2011 be referred to in the individual International Standards specifying such metallic materials.
ISO 10271:2011 is not applicable to instruments and dental amalgam and appliances for orthodontics.

Zahnheilkunde - Korrosionsprüfverfahren für metallische Werkstoffe (ISO 10271:2011)

Diese Internationale Norm legt Prüfverfahren und Prüfpläne zur Bestimmung des Korrosionsverhaltens metallischer
Werkstoffe fest, die in der Mundhöhle verwendet werden. Es ist vorgesehen, dass auf die
Prüfverfahren und Prüfpläne, die in dieser Internationalen Norm beschreiben werden, in den jeweiligen
internationalen Normen für metallische Werkstoffe, verwiesen wird.
Diese Internationale Norm ist nicht anwendbar auf Instrumente und zahnärztliches Amalgam sowie auf
kieferorthopädische Apparaturen.

Médecine bucco-dentaire - Méthodes d'essai de corrosion des matériaux métalliques (ISO 10271:2011)

L'ISO 10271:2011 spécifie des méthodes et des protocoles d'essai permettant de déterminer le comportement à la corrosion des produits métalliques utilisés dans la cavité buccale.
L'ISO 10271:2011 ne s'applique pas aux instruments, aux amalgames dentaires ni aux applications d'orthodontie.

Zobozdravstvo - Preskusne metode ugotavljanja korozije za kovinske materiale (ISO 10271:2011)

Ta mednarodni standard podaja preskusne metode in postopke za ugotavljanje korozijskih lastnosti kovinskih materialov, ki se uporabljajo v ustni votlini. Predvideva se, da se posamezni mednarodni standardi, ki določajo take kovinske materiale, sklicujejo na preskusne metode in postopke iz tega mednarodnega standarda. Ta mednarodni standard ne velja za instrumente, zobni amalgam in ortodontske naprave.

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2011
• Withdrawal Date: 22-Sep-2020
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Sep-2020
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Ref Project: SIST EN ISO 10271:2011 - Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011)

Relations

• Replaces: EN ISO 10271:2001/AC:2006 - Dental metallic materials - Corrosion test methods (ISO 10271:2001/Cor.1:2005)
• Effective Date: 06-Aug-2011
• Replaces: EN ISO 10271:2001 - Dental metallic materials - Corrosion test methods (ISO 10271:2001)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10271:2020 - Dentistry - Corrosion test methods for metallic materials (ISO 10271:2020)
• Effective Date: 30-Sep-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zobozdravstvo - Preskusne metode ugotavljanja korozije za kovinske materiale (ISO 10271:2011)Zahnheilkunde - Korrosionsprüfverfahren für metallische Werkstoffe (ISO 10271:2011)Médecine bucco-dentaire - Méthodes d'essai de corrosion des matériaux métalliques (ISO 10271:2011)Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011)11.060.10Dental materialsICS:Ta slovenski standard je istoveten z:EN ISO 10271:2011SIST EN ISO 10271:2011en,fr,de01-december-2011SIST EN ISO 10271:2011SLOVENSKI
STANDARDSIST EN ISO 10271:2002/AC:2006SIST EN ISO 10271:20021DGRPHãþD



SIST EN ISO 10271:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10271
August 2011 ICS 11.060.10 Supersedes EN ISO 10271:2001English Version
Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011)
Médecine bucco-dentaire - Méthodes d'essai de corrosion des matériaux métalliques (ISO 10271:2011)
Zahnheilkunde - Korrosionsprüfverfahren für metallische Werkstoffe (ISO 10271:2011) This European Standard was approved by CEN on 29 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10271:2011: ESIST EN ISO 10271:2011



EN ISO 10271:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 10271:2011



EN ISO 10271:2011 (E) 3 Foreword This document (EN ISO 10271:2011) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10271:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10271:2011 has been approved by CEN as a EN ISO 10271:2011 without any modification.
SIST EN ISO 10271:2011



SIST EN ISO 10271:2011



Reference numberISO 10271:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO10271Second edition2011-08-01Dentistry — Corrosion test methods for metallic materials Médecine bucco-dentaire — Méthodes d'essai de corrosion des matériaux métalliques
SIST EN ISO 10271:2011



ISO 10271:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
SIST EN ISO 10271:2011

...