FprEN ISO 7436
(Main)Fasteners - Slotted set screws with cup point (ISO/FDIS 7436:2024)
Fasteners - Slotted set screws with cup point (ISO/FDIS 7436:2024)
This document specifies the characteristics of slotted set screws with cup point, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5, or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Verbindungselemente - Gewindestifte mit Schlitz und Ringschneide (ISO/FDIS 7436:2024)
Dieses Dokument legt die Eigenschaften von Gewindestiften mit Schlitz und Ringschneide aus Stahl und nichtrostendem Stahl mit metrischen Regelgewinden M1,6 bis M12 und mit Produktklasse A fest.
Falls in bestimmten Fällen andere Festlegungen benötigt werden, können Härteklassen und nichtrostende Stahlsorten aus ISO 898 5 oder ISO 3506 3 und maßliche Alternativen aus ISO 888, ISO 965 1 oder ISO 4753 entnommen werden.
Fixations - Vis sans tête fendues à bout cuvette (ISO/FDIS 7436:2024)
Le présent document spécifie les caractéristiques des vis sans tête fendues à bout cuvette, en acier et en acier inoxydable, à filetage métrique à pas gros M1,6 à M12, et de grade A.
Si dans certains cas d’autres spécifications sont requises, les classes de dureté et les grades d’acier inoxydable peuvent être choisis dans l'ISO 898-5 ou l'ISO 3506-3, et les options dimensionnelles dans l’ISO 888, l'ISO 965-1 ou l'ISO 4753.
Vezni elementi - Navojni zatiči z zarezo in končino z obročastim rezilom (ISO/FDIS 7436:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 7436:2023
01-maj-2023
Vezni elementi - Navojni zatiči z zarezo in končino z obročastim rezilom (ISO/DIS
7436:2023)
Fasteners - Slotted set screws with cup point (ISO/DIS 7436:2023)
Verbindungselemente - Gewindestifte mit Schlitz und Ringschneide (ISO/DIS 7436:2023)
Fixations - Vis sans tête fendues à bout cuvette (ISO/DIS 7436:2023)
Ta slovenski standard je istoveten z: prEN ISO 7436
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN ISO 7436:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 7436:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7436:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 7436
ISO/TC 2/SC 11 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-08 2023-05-31
Fasteners — Slotted set screws with cup point
ICS: 21.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 7436:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7436:2023
ISO/DIS 7436:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 7436
ISO/TC 2/SC 11 Secretariat: DIN
Voting begins on: Voting terminates on:
Fasteners — Slotted set screws with cup point
ICS: 21.060.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 7436:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7436:2023
ISO/DIS 7436:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions .1
5 Requirements and reference International Standards . 3
6 Marking and lab
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.