EN 2240-016:2010
(Main)Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305 - Product standard
Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305 - Product standard
This European Standard specifies the required characteristics for lamp, code 305, for aerospace applications.
It shall be used together with EN 2756.
Luft- und Raumfahrt - Glühlampen - Teil 016: Lampe, Kode 305 - Produktnorm
Diese Norm legt die Anforderungen von Lampen, Kode 305, zur Anwendung in der Luftfahrt fest.
Sie ist in Verbindung mit EN 2756 anzuwenden.
Série aérospatiale - Lampes à incandescence - Partie 016: Lampe, code 305 - Norme de produit
Aeronavtika - Žarnice - 016. del: Žarnica, kod 305 - Standard za proizvod
Ta evropski standard opredeljuje zahtevane lastnosti za žarnico, kod 305, za uporabo v aeronavtiki. Uporablja se skupaj z EN 2756.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2240-016:2010
01-april-2010
Aeronavtika - Žarnice - 016. del: Žarnica, kod 305 - Standard za proizvod
Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305 - Product standard
Luft- und Raumfahrt - Glühlampen - Teil 016: Lampe, Kode 305 - Produktnorm
Série aérospatiale - Lampes à incandescence - Partie 016: Lampe, code 305 - Norme de
produit
Ta slovenski standard je istoveten z: EN 2240-016:2010
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 2240-016:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2240-016:2010
---------------------- Page: 2 ----------------------
SIST EN 2240-016:2010
EUROPEAN STANDARD
EN 2240-016
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2010
ICS 49.060
English Version
Aerospace series - Lamps, incandescent - Part 016: Lamp, code
305 - Product standard
Série aérospatiale - Lampes à incandescence - Partie 016: Luft- und Raumfahrt - Glühlampen - Teil 016: Lampe, Kode
Lampe, code 305 - Norme de produit 305 - Produktnorm
This European Standard was approved by CEN on 25 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2240-016:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2240-016:2010
EN 2240-016:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Required characteristics .5
4 Designation .6
5 Marking .6
6 Technical specification .6
2
---------------------- Page: 4 ----------------------
SIST EN 2240-016:2010
EN 2240-016:2010 (E)
Foreword
This document (EN 2240-016:2010) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at
the latest by August 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Au
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.