EN 2591-420:2006

Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories

This standard specifies a method of determining the mechanical strength of rear accessories used on elements of electrical and optical connection subjected to bending, tensile and torsional forces.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 420: Mechanische Festigkeit der rückseitigen Zubehörteile

Diese Norm legt ein Verfahren zum Nachweis der mechanischen Festigkeit der rückseitigen Zubehörteile von elektrischen und optischen Verbindungselementen fest, die Biege-, Zug- und Verdrehkräften ausgesetzt sind.
Sie ist in Verbindung mit EN 2591 100 anzuwenden

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 420 : Tenue mécanique des accessoires arrière

Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 420. del: Mehanska trdnost zadnjih elementov

General Information

• Status: Published
• Publication Date: 18-Jul-2006
• Withdrawal Date: 30-Jan-2007
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 2591-420:2009 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories

Relations

• Replaces: EN 2591-420:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 420: Mechanische Festigkeit der rückseitigen ZubehörteileSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 420 : Tenue mécanique des accessoires arrièreAerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-420:2006SIST EN 2591-420:2009en,de01-april-2009SIST EN 2591-420:2009SLOVENSKI
STANDARDSIST EN 2591-420:20041DGRPHãþD



SIST EN 2591-420:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-420July 2006ICS 49.060Supersedes EN 2591-420:2001
English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 420: Mechanical strength of rearaccessoriesSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 420 : Tenuemécanique des accessoires arrièreLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 420:Mechanische Festigkeit der rückseitigen ZubehörteileThis European Standard was approved by CEN on 27 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-420:2006: ESIST EN 2591-420:2009



EN 2591-420:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Apparatus.4 5 Method.4 6 Requirements.7
SIST EN 2591-420:2009



EN 2591-420:2006 (E) 3 Foreword This European Standard (EN 2591-420:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2591-420:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icel
...