EN 6059-302:2017

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure

This European Standard specifies a method for the high temperature exposure of protection sleeve for electrical cable and cable bundles for aerospace application.
It shall be used together with EN 6059-100.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 302: Hochtemperaturbeständigkeit

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Hochtemperaturbeständigkeit von Schutz-schläuchen für elektrische Leitungen und Leitungsbündel für Luft- und Raumfahrtanwendungen fest.
Sie ist in Verbindung mit EN 6059-100 anzuwenden.

Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 302 : Exposition à haute température

La présente Norme européenne spécifie une méthode pour l’exposition à haute température des gaines de protection pour les câbles et torons de câbles électriques pour application aérospatiale.
Elle doit être utilisée conjointement avec l’EN 6059-100.

Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 302. del: Izpostavljenost visoki temperaturi

Ta evropski standard določa metodo za izpostavljenost visoki temperaturi za zaščitne obojke za električne kable in snope kablov za uporabo v aeronavtiki.
Uporabljati ga je treba skupaj s standardom EN 6059-100.

General Information

• Status: Published
• Publication Date: 28-Mar-2017
• Withdrawal Date: 29-Sep-2017
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-Mar-2017
• Completion Date: 29-Mar-2017
• Ref Project: SIST EN 6059-302:2017 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2017
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQHRERMNH3UHVNXVQHPHWRGH
GHO,]SRVWDYOMHQRVWYLVRNLWHPSHUDWXUL
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -
Part 302: High temperature exposure
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 302: Hochtemperaturbeständigkeit
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes
d'essais - Partie 302 : Exposition à haute température
Ta slovenski standard je istoveten z: EN 6059-302:2017
ICS:
29.060.20 Kabli Cables
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 6059-302
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2017
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Electrical cables, installation -
Protection sleeves - Test methods - Part 302: High
temperature exposure
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaines de protection - Méthodes d'essais - Partie 302 : Installation - Schutzschläuche - Prüfverfahren - Teil
Exposition à haute température 302: Hochtemperaturbeständigkeit
This European Standard was approved by CEN on 6 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6059-302:2017 E
worldwide for CEN national Members.

Contents page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Preparation of specimens .
...