prEN ISO 6877
(Main)Dentistry - Endodontic obturating materials (ISO/DIS 6877:2024)
Dentistry - Endodontic obturating materials (ISO/DIS 6877:2024)
This document establishes the specifications for the dimensions of various endodontic obturating materials including preformed metal, preformed polymeric-coated metal, polymeric points, thermoplastic obturating material or combinations of the above, suitable for use in the obturation of the root canal system. This document also specifies numerical systems and a colour-coding system for designating the sizes of preformed endodontic obturating points.
Dental endodontic obturating points are marketed sterilized or non-sterilized. This document covers the physical attributes expected of such products as supplied.
Sterility is not included in this document, and any claim that the product is sterile is the responsibility of the manufacturer (see Table 3). Clause 7 specifies the labelling needed, including the instructions for use.
This document does not apply to instruments or apparatus used in conjunction with thermoplastic obturating materials (obturating material that deform with heat). This document is not applicable to materials for support of a coronal restoration.
Zahnheilkunde - Endodontische Obturationswerkstoffe (ISO/DIS 6877:2024)
Dieses Dokument legt die Anforderungen an die Maße verschiedener endodontischer Obturationswerkstoffe fest, einschließlich vorgeformte Metall-, vorgeformte kunststoffbeschichtete Metall-, Kunststoffstifte, thermoplastische Obturationswerkstoffe oder Kombinationen davon, die zur Obturation eines Wurzelkanalsystems geeignet sind. Dieses Dokument legt auch ein Nummernsystem und ein Farbkennzeichnungssystem zur Größenbezeichnung von vorgeformten endodontischen Obturationsstifen fest.
Zahnärztliche endodontische Obturationsstifte sind in steriler oder nicht steriler Form im Handel erhältlich. Dieses Dokument beschreibt die physikalischen Eigenschaften, die von Produkten dieser Art im Lieferzustand erwartet werden.
Anforderungen an die Sterilität sind nicht enthalten, und jeder Anspruch auf Sterilität des Produktes fällt in den Verantwortungsbereich des Herstellers (siehe Tabelle 3). Abschnitt 7 legt die Anforderungen an die Kennzeichnung einschließlich der Gebrauchsanweisung fest.
Dieses Dokument gilt nicht für Instrumente oder Ausrüstung, die zusammen mit thermoplastischen Obturationswerkstoffen (Obturationswerkstoff, der sich bei Hitze verformt), verwendet werden. Dieses Dokument gilt nicht für Werkstoffe, die für koronale Aufbauten verwendet werden.
Médecine bucco-dentaire - Matériaux d’obturation endodontique (ISO/DIS 6877:2024)
Le présent document établit les spécifications pour les dimensions de divers matériaux d’obturation endodontique incluant les cônes métalliques préformés, les cônes métalliques préformés revêtus de polymère, les cônes à base de polymères, les matériaux d’obturation thermoplastiques ou les combinaisons de ceux-ci, qui sont appropriés pour être utilisés dans le cadre de l’obturation du système de canaux radiculaires. Le présent document spécifie également des systèmes numériques et un système de code de couleur pour la désignation des tailles de cônes d’obturation endodontique préformés.
Les cônes d'obturation endodontique sont commercialisés stérilisés ou non stérilisés. Le présent document couvre les caractéristiques physiques attendues de ces produits tels qu'ils sont fournis.
La stérilité n’est pas abordée dans le présent document et toute revendication indiquant que le produit est stérile est sous la responsabilité du fabricant (voir Tableau 3). L’Article 7 spécifie l’étiquetage, y compris les instructions d’utilisation.
Le présent document ne s’applique pas aux instruments ou à l’appareillage utilisés en association avec les matériaux d'obturation thermoplastiques (matériaux d’obturation qui se déforment sous l’effet de la chaleur). Le présent document n’est pas applicable aux matériaux utilisés pour l’ancrage d’une restauration coronaire.
Zobozdravstvo - Endodontski materiali za polnitev koreninskih kanalov (obturacijo) (ISO/DIS 6877:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2024
Zobozdravstvo - Endodontski materiali za polnitev koreninskih kanalov
(obturacijo) (ISO/DIS 6877:2024)
Dentistry - Endodontic obturating materials (ISO/DIS 6877:2024)
Zahnheilkunde - Endodontische Obturationswerkstoffe (ISO/DIS 6877:2024)
Médecine bucco-dentaire - Matériaux d’obturation endodontique (ISO/DIS 6877:2024)
Ta slovenski standard je istoveten z: prEN ISO 6877
ICS:
11.060.10 Zobotehnični materiali Dental materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 6877
ISO/TC 106/SC 1
Dentistry — Endodontic obturating
Secretariat: AFNOR
materials
Voting begins on:
Médecine bucco-dentaire — Matériaux d’obturation
2024-03-21
endodontique
Voting terminates on:
ICS: 11.060.10 2024-06-13
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 6877:2024(en)
DRAFT
ISO/DIS 6877:2024(en)
International
Standard
ISO/DIS 6877
ISO/TC 106/SC 1
Dentistry — Endodontic obturating
Secretariat: AFNOR
materials
Voting begins on:
Médecine bucco-dentaire — Matériaux d’obturation
endodontique
Voting terminates on:
ICS: 11.060.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 6877:2024(en)
ii
ISO/DIS 6877:2024(en)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 4
4.1 Appearance .4
4.2 Length .4
4.3 General .4
4.4 Nominal size and tolerances.4
4.5 Colour-coding .4
4.6 Taper .4
4.7 Carrier-based obturating material .7
4.8 Physical integrity .7
4.9 Radiopacity .8
5 Procurement of samples . 8
6 Measurement and test methods . 8
6.1 Test conditions .8
6.2 Visual examination .8
6.2.1 General .8
6.3 Length .8
6.3.1 Apparatus .8
6.3.2 Method . .8
6.4 Taper and nominal size measurements .8
6.4.1 Apparatus .8
6.4.2 Method for taper of standard and greater taper points .9
6.4.3 Method for initial taper of variable taper points .9
6.5 Physical integrity .9
6.5.1 General .9
6.5.2 Apparatus .9
6.5.3 Method . .10
6.5.4 Interpretation of the results .10
6.6 Radio-opacity .11
6.6.1 Apparatus .11
6.6.2 Method . .11
6.6.3 Interpretation of the results .11
6.7 Melt mass-flow rate . 12
7 Product information .12
7.1 Marking . 12
7.2 Packaging and labelling . 12
Annex A (normative) Melt mass-flow rate test .15
Bibliography . 19
iii
ISO/DIS 6877:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the follow
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.