EN ISO 11073-20701:2020
(Main)Health informatics - Device interoperability - Part 20701: Point-of-care medical device communication - Service oriented medical device exchange architecture and protocol binding (ISO/IEEE 11073-20701:2020)
Health informatics - Device interoperability - Part 20701: Point-of-care medical device communication - Service oriented medical device exchange architecture and protocol binding (ISO/IEEE 11073-20701:2020)
The scope of this standard is a service-oriented medical device architecture and communication protocol specification for distributed system of Point-of-Care (PoC) medical devices and medical IT systems that need to exchange data or safely control networked PoC medical devices. It identifies the functional components, their communication relationships as well as the binding of the components and communication relationships to protocol specifications.
Medizinische Informatik - Geräteinteroperabilität - Teil 20701: Kommunikation patientennaher medizinischer Geräte - Service-orientierte Architektur und Protokoll für Medizingeräte-Kommunikation (ISO/IEEE 11073-20701:2020)
Informatique de santé - Interopérabilité des dispositifs - Partie 20701: Communication entre dispositifs médicaux sur le site des soins - Architecture d'échange orientée services entre dispositifs médicaux et liaison par protocole (ISO/IEEE 11073-20701:2020)
Le domaine d'application de la présente norme est une spécification d'architecture de dispositifs médicaux et de protocole de communication orientés services pour les systèmes distribués de dispositifs médicaux sur le site des soins (PoC) et les systèmes informatiques médicaux qui doivent échanger des données ou commander en toute sécurité des dispositifs médicaux PoC en réseau. Elle identifie les composants fonctionnels, leurs relations de communication, ainsi que la liaison des composants et des relations de communication avec les spécifications du protocole.
Zdravstvena informatika - Interoperabilnost naprav - 20701. del: Komunikacija medicinskih naprav na mestu oskrbe - Storitveno usmerjena arhitektura in protokol za komunikacijo z medicinskimi napravami (ISO/IEEE 11073-20701:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2020
Zdravstvena informatika - Medobratovalnost naprav - 20701. del: Komunikacija
medicinskih naprav na mestu oskrbe - Storitveno usmerjena arhitektura in
protokol za komunikacijo z medicinskimi napravami (ISO/IEEE 11073-20701:2020)
Health informatics - Device interoperability - Part 20701: Point-of-care medical device
communication - Service oriented medical device exchange architecture and protocol
binding (ISO/IEEE 11073-20701:2020)
Medizinische Informatik - Kommunikation patientennaher medizinischer Geräte - Teil
20701: Service-Orientierte Architektur und Protokoll für Medizingeräte-Kommunikation
(ISO/IEEE 11073-20701:2020)
Informatique de santé - Interopérabilité des dispositifs - Partie 20701: Communication
entre dispositifs médicaux sur le site des soins - Architecture d'échange orientée
services entre dispositifs médicaux et liaison par protocole (ISO/IEEE 11073-
20701:2020)
Ta slovenski standard je istoveten z: EN ISO 11073-20701:2020
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11073-20701
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS
English Version
Health informatics - Device interoperability - Part 20701:
Point-of-care medical device communication - Service
oriented medical device exchange architecture and
protocol binding (ISO/IEEE 11073-20701:2020)
Informatique de santé - Interopérabilité des dispositifs Medizinische Informatik - Kommunikation
- Partie 20701: Communication entre dispositifs patientennaher medizinischer Geräte - Teil 20701:
médicaux sur le site des soins - Architecture d'échange Service-Orientierte Architektur und Protokoll für
orientée services entre dispositifs médicaux et liaison Medizingeräte-Kommunikation (ISO/IEEE 11073-
par protocole (ISO/IEEE 11073-20701:2020) 20701:2020)
This European Standard was approved by CEN on 18 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-20701:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11073-20701:2020) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-20701:2020 has been approved by CEN as EN ISO 11073-20701:2020
without any modification.
INTERNATIONAL ISO/IEEE
STANDARD 11073-
First edition
2020-03
Health informatics — Device
interoperability —
Part 20701:
Point-of-care medical device
communication — Service oriented
medical device exchange architecture
and protocol binding
Informatique de santé — Interopérabilité des dispositifs —
Partie 20701: Communication entre dispositifs médicaux sur le site
des soins — Architecture d'échange orientée services entre dispositifs
médicaux et liaison par protocole
Reference number
ISO/IEEE 11073-20701:2020(E)
©
IEEE 2019
ISO/IEEE 11073-20701:2020(E)
© IEEE 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii © IEEE 2019 – All rights reserved
ISO/IEEE 11073-20701:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-20701 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering
in Medicine and Biology Society (as IEEE Std 11073-20701-2018) and drafted in accordance with its
editorial rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards
Development Organization cooperation agreement between ISO and IEEE, by Technical Committee
ISO/TC 215, Health informatics.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
.
complete listing of these bodies can be found at www.iso.org/members.html
© IEEE 2019 – All rights reserved
iii
Health informatics—Point-of-care medical device communication
Part 20701: Service-Oriented Medical
Device Exchange Architecture and
Protocol Binding
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 27 September 2018
IEEE-SA Standards Board
ISO/IEEE 11073-20701:2020(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for point-of-care (PoC)
medical device communication, an architecture for service-oriented distributed PoC medical
devices and medical IT systems is defined. This standard defines a binding of the Participant,
Discovery, and Communication Model defined in IEEE Std 11073-10207™ to the profile for
transport over Web Services defined in IEEE Std 11073-20702™. Moreover, a binding to Network
Time Protocol (NTP) and Differentiated Services (DiffServ) is defined for time synchronization
and transport Quality of Service requirements.
Keywords: alert systems, BICEPS, DiffServ, IEEE 11073-20701™, ISO/IEEE 11073, MDPWS,
medical device communication, NTP, patient, point-of-care, remote control, service-oriented
architecture
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 15 January 2019. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
W3C is a trademark (registered in numerous countries) of the World Wide Web Consortium; marks of W3C are registered and held by its
host institutions MIT, ERCIM, Keio, and Beihang.
PDF: ISBN 978-1-5044-5264-9 STD23381
Print: ISBN 978-1-5044-5265-6
STDPD23381
IEEE prohibits discrimination, harassment, and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written
permission of the publisher.
ISO/IEEE 11073-20701:2020(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards,
...
SLOVENSKI STANDARD
01-junij-2020
Zdravstvena informatika - Interoperabilnost naprav - 20701. del: Komunikacija
medicinskih naprav na mestu oskrbe - Storitveno usmerjena arhitektura in
protokol za komunikacijo z medicinskimi napravami (ISO/IEEE 11073-20701:2020)
Health informatics - Device interoperability - Part 20701: Point-of-care medical device
communication - Service oriented medical device exchange architecture and protocol
binding (ISO/IEEE 11073-20701:2020)
Medizinische Informatik - Kommunikation patientennaher medizinischer Geräte - Teil
20701: Service-Orientierte Architektur und Protokoll für Medizingeräte-Kommunikation
(ISO/IEEE 11073-20701:2020)
Informatique de santé - Interopérabilité des dispositifs - Partie 20701: Communication
entre dispositifs médicaux sur le site des soins - Architecture d'échange orientée
services entre dispositifs médicaux et liaison par protocole (ISO/IEEE 11073-
20701:2020)
Ta slovenski standard je istoveten z: EN ISO 11073-20701:2020
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11073-20701
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS
English Version
Health informatics - Device interoperability - Part 20701:
Point-of-care medical device communication - Service
oriented medical device exchange architecture and
protocol binding (ISO/IEEE 11073-20701:2020)
Informatique de santé - Interopérabilité des dispositifs Medizinische Informatik - Kommunikation
- Partie 20701: Communication entre dispositifs patientennaher medizinischer Geräte - Teil 20701:
médicaux sur le site des soins - Architecture d'échange Service-Orientierte Architektur und Protokoll für
orientée services entre dispositifs médicaux et liaison Medizingeräte-Kommunikation (ISO/IEEE 11073-
par protocole (ISO/IEEE 11073-20701:2020) 20701:2020)
This European Standard was approved by CEN on 18 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-20701:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11073-20701:2020) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-20701:2020 has been approved by CEN as EN ISO 11073-20701:2020
without any modification.
INTERNATIONAL ISO/IEEE
STANDARD 11073-
First edition
2020-03
Health informatics — Device
interoperability —
Part 20701:
Point-of-care medical device
communication — Service oriented
medical device exchange architecture
and protocol binding
Informatique de santé — Interopérabilité des dispositifs —
Partie 20701: Communication entre dispositifs médicaux sur le site
des soins — Architecture d'échange orientée services entre dispositifs
médicaux et liaison par protocole
Reference number
ISO/IEEE 11073-20701:2020(E)
©
IEEE 2019
ISO/IEEE 11073-20701:2020(E)
© IEEE 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii © IEEE 2019 – All rights reserved
ISO/IEEE 11073-20701:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
ISO/IEEE 11073-20701 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering
in Medicine and Biology Society (as IEEE Std 11073-20701-2018) and drafted in accordance with its
editorial rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards
Development Organization cooperation agreement between ISO and IEEE, by Technical Committee
ISO/TC 215, Health informatics.
A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
.
complete listing of these bodies can be found at www.iso.org/members.html
© IEEE 2019 – All rights reserved
iii
Health informatics—Point-of-care medical device communication
Part 20701: Service-Oriented Medical
Device Exchange Architecture and
Protocol Binding
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 27 September 2018
IEEE-SA Standards Board
ISO/IEEE 11073-20701:2020(E)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for point-of-care (PoC)
medical device communication, an architecture for service-oriented distributed PoC medical
devices and medical IT systems is defined. This standard defines a binding of the Participant,
Discovery, and Communication Model defined in IEEE Std 11073-10207™ to the profile for
transport over Web Services defined in IEEE Std 11073-20702™. Moreover, a binding to Network
Time Protocol (NTP) and Differentiated Services (DiffServ) is defined for time synchronization
and transport Quality of Service requirements.
Keywords: alert systems, BICEPS, DiffServ, IEEE 11073-20701™, ISO/IEEE 11073, MDPWS,
medical device communication, NTP, patient, point-of-care, remote control, service-oriented
architecture
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 15 January 2019. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
W3C is a trademark (registered in numerous countries) of the World Wide Web Consortium; marks of W3C are registered and held by its
host institutions MIT, ERCIM, Keio, and Beihang.
PDF: ISBN 978-1-5044-5264-9 STD23381
Print: ISBN 978-1-5044-5265-6
STDPD23381
IEEE prohibits discrimination, harassment, and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written
permission of the publisher.
ISO/IEEE 11073-20701:2020(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These
notices and disclaimers, or a reference to this page, appear in all standards and may be found under the
heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be
obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE
Standards are documents developed through scientific, academic, and industry-based technical working
groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate
without compensation from IEEE. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards
documents are responsible for determining and complying with all appropriate safety, security,
environmental, health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.