prEN 2267-002

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: General

This document specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between -55 °C and 260 °C (except otherwise specified in product standards).

Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 260 °C - Teil 002: Allgemeines

No Scope available

Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 °C et 260 °C - Partie 002: Généralités

Le présent document spécifie la liste des normes de produits et les caractéristiques communes des câbles électriques utilisés dans les systèmes électriques à bord des aéronefs à des températures de fonctionnement comprises entre –55 °C et 260 °C (sauf spécification contraire dans les normes de produits).

Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 002. del: Splošno

General Information

• Status: Not Published
• Publication Date: 14-Oct-2025
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 2 - Cables & Stripping Tools
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 11-Jul-2024
• Completion Date: 11-Jul-2024
• Ref Project: oSIST prEN 2267-002:2024 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: General

Relations

• Revises: EN 2267-002:2015 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General
• Effective Date: 06-Dec-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2024
Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55
°C in 260 °C - 002. del: Splošno
Aerospace series - Cables, electrical, for general purpose - Operating temperatures
between - 55 °C and 260 °C - Part 002: General
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung -
Betriebstemperaturen zwischen -55 °C und 260 °C - Teil 002: Allgemeines
Série aérospatiale - Câbles, électriques, d'usage général - Températures de
fonctionnement comprises entre -55 °C et 260 °C - Partie 002: Généralités
Ta slovenski standard je istoveten z: prEN 2267-002
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2024
ICS 49.060 Will supersede EN 2267-002:2015
English Version
Aerospace series - Cables, electrical, for general purpose -
Operating temperatures between - 55 °C and 260 °C - Part
002: General
Série aérospatiale - Câbles, électriques, d'usage Luft- und Raumfahrt - Leitungen, elektrisch, für
général - Températures de fonctionnement comprises allgemeine Verwendung - Betriebstemperaturen
entre -55 °C et 260 °C - Partie 002: Généralités zwischen -55 °C und 260 °C - Teil 002: Allgemeines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2267-002:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and symbols . 5
4 List of product standards . 5
5 Materials and construction . 6
5.1 Materials . 6
5.2 Construction . 6
5.2.1 Number of cores . 6
5.2.2 Colour coding of single core cables . 7
5.2.3 Colour coding of unscreened, multicore cables . 8
6 Identification and marking . 11
7 Technical specification . 12
Bibliography . 13

European foreword
This document (prEN 2267-002:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2267-002:2015.
EN 2267-002:2015:
— EN 2267-002 (P5), 07/2015 — In subclause 5.2.1; added: “The calculated mass for multicore cables
with this factor is predominant on the individual mass of the single core inside. Hence, the mass of
the individual core could exceed the maximal mass of the single core specification.”.
1 Scope
This document specifies the list of product standards and common characteristics of electrical cables
for use in the on-board electrical systems of aircraft at operating temperatures between –55 °C and
260 °C (except otherwise specified in product standards).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2084, Aerospace series — Cables, electrical, general purpose, with conductors in copper or copper
alloy — Technical specification
EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed — Technical
specification
EN 2267-003, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between - 55 °C and 260 °C — Part 003: Ink jet printable — Product standard
EN 2267-004, Cables, electrical, for general purpose — Operating temperatures between −55 °C and
260 °C — Part 004: CO laser printable — Product standard
EN 2267-005, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between - 55 °C and 260 °C — Part 005: UV laser printable — Product standard
EN 2267-006, Cables, electrical, for general purpose — Operating temperatures between −55 °C and
260 °C — Part 006: YAG X3 laser printable — Product standard
EN 2267-007, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between - 55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly —
Product standard
EN 2267-008, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between - 55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly —
Product standard
EN 2267-009, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between -55 °C and 260 °C — Part 009: DRA family, single and multicore assembly — Product standard
EN 2267-010, Aerospace series — Cables, electrical, for general purpose — Operating temperatures
between -55 °C and 260 °C — Part 010: DR family, single UV laser printable — Product standard
EN 2267-011, Aerospace series — Cables,
...