EN 3475-703:2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking

This standard specifies a method of testing the permanence of the manufacturer's marking on finished cables.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftahrtverwendung - Prüfverfahren - Teil 703: Haltbarkeit der Herstellerkennzeichnung

Diese Norm legt ein Verfahren zur Prüfung der Haltbarkeit der Herstellerkennzeichnung auf  fertigen Leitung fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 703 : Tenue du marquage fabricant

Cette norme définit une méthode pour mesurer la tenue du marquage fabricant du câble terminé.
Elle doit être utilisée conjointement avec EN 3475-100.

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking

General Information

• Status: Published
• Publication Date: 05-Feb-2002
• Withdrawal Date: 30-Aug-2002
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Start Date: 28-Feb-2005
• Completion Date: 28-Feb-2005
• Ref Project: SIST EN 3475-703:2004 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's markingLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 703: Haltbarkeit der HerstellerkennzeichnungSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 703 : Tenue du marquage fabricantAerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-703:2002SIST EN 3475-703:2004en01-maj-2004SIST EN 3475-703:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-703February 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 703: Permanence of manufacturer's markingSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 703: Tenue dumarquage fabricantLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt,Verwendung - Prüfverfahren - Teil 703: Haltbarkeit derHerstellerkennzeichnungThis European Standard was approved by CEN on 6 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-703:2002 ESIST EN 3475-703:2004
...