prEN 17555-1
(Main)Aggregates for construction works - Part 1: Characteristics
Aggregates for construction works - Part 1: Characteristics
The Part 1 (harmonised) European Standard will specify the characteristics of aggregates for use in
• concrete for buildings, roads and other civil engineering works,
• mortar
• bituminous mixtures and surface treatments for roads, airfields and other trafficked areas,
• unbound and hydraulically bound materials for use in civil engineering work and road construction
Aggregates to be covered in this European Standard, are obtained by processing natural, manufactured or recycled materials and mixtures of these materials. Families of aggregates covered will include coarse aggregates, grit, fine aggregates, natural graded aggregates, all-in aggregates and added fillers.
The standard will cover natural and manufactured aggregates having an oven dried particle density greater than 2,00 Mg/m3 and recycled aggregates with particle densities greater than 1,50 Mg/m3. Natural and manufactured aggregates of density less than or equal to 2,00 Mg/m3 are already covered by our existing standard EN 13055.
The standard will not cover
• the use of reclaimed bituminous mixtures. Reclaimed asphalt for use as a constituent of bituminous mixtures is specified in EN 13108 8.
• use of aggregates as soil
• the creation of unbound mixtures for road construction from aggregates as this aspect is specified in EN13285
The non-harmonised Part 2 standard will provide non-contradictory complementary information to assist in the practical application of the Part 1 standard, including advice on the reasons for testing and declaring various characteristics and recommendations for the practical implementation of factory production control measures.
Gesteinskörnungen für Bauwerke - Teil 1: Produktnorm
Dieses Dokument legt die Merkmale von Gesteinskörnungen fest, d. h. Gesteinskörnungen ohne Fremdfüller (siehe 3.1.1 a)) und Fremdfüller (siehe 3.1.1 b)) für Anwendungen mit oder ohne hohe Sicherheitsanforderungen, für:
a) Beton für Gebäude, Straßen und andere Ingenieurbauwerke;
b) Asphalte und Oberflächenbehandlungen für Straßen, Flugplätze und andere Verkehrsflächen;
c) Mörtel, Putzmörtel und Estriche, z. B. Mauermörtel, Estrichmörtel, Innenputzmörtel, Außenputzmörtel, besondere Vergussmörtel, Reparaturmörtel, und Einpressmörtel für Gebäude, Straßen und Ingenieurbauwerke;
d) ungebundene und hydraulisch gebundene Gemische für den Ingenieur- und Straßenbau.
In Hinsicht auf die Herkunft und den Herstellungsprozess des Baustoffs behandelt dieses Dokument natürliche Gesteinskörnung (siehe 3.1.2), industriell hergestellte Gesteinskörnung (siehe 3.1.3), rezyklierte Gesteinskörnung (siehe 3.1.4) und Mischungen aus diesen Baustoffen.
Die in diesem Dokument behandelten Gesteinskörnungen sind:
a) Gesteinskörnungen ohne Fremdfüller, einschließlich grober Gesteinskörnungen (siehe 3.1.8), Feinsplitt (siehe 3.1.11), feiner Gesteinskörnungen (siehe 3.1.12), Gesteinskörnungsgemischen (siehe 3.1.13), natürlich zusammengesetzter Gesteinskörnungen (siehe 3.1.14); und
b) Fremdfüller (siehe 3.1.15).
In diesem Dokument behandelte grobe Gesteinskörnungen sind enggestufte grobe Gesteinskörnungen (siehe 3.1.9) und weitgestufte grobe Gesteinskörnungen (siehe 3.1.10).
Die in diesem Dokument behandelten Fremdfüller sind natürliche Füller (siehe 3.1.16), industriell hergestellte Füller (siehe 3.1.18), Mischfüller (siehe 3.1.19), Verbundfüller (siehe 3.1.20) und rezyklierte Füller (siehe 3.1.21). Natürliche Füller schließen Füller aus Kalkstein (siehe 3.1.17) ein.
Dieses Dokument behandelt nicht:
— natürliche und industriell hergestellte Gesteinskörnungen mit einer Kornrohdichte nach Trocknung im Wärmeschrank kleiner gleich 2,00 mg/m3, weil sie bereits in prEN 13055:2021 festgelegt sind;
— rezyklierte Gesteinskörnungen mit niedrigeren Rohdichten als 1,50 mg/m3;
— Gesteinskörnungen mit einer oberen Nennkorngröße von mehr als 90 mm;
— Wasserbaustein, weil dieser in prEN 13383 1:2021 festgelegt ist;
— Gesteinskörnungen für Gleisschotter, weil diese in prEN 13450 1:2021 festgelegt sind;
— die Verwendung von Gesteinskörnungen in Ausbauasphaltmischgut, weil Ausbauasphalt zur Verwendung als Bestandteil von Asphaltmischgut bereits in EN 13108 8:2016 festgelegt ist;
— Verwendung von Gesteinskörnungen als Boden;
— die Verwendung von Gesteinskörnungen für Erdarbeiten, weil diese in EN 16907 2:2018 festgelegt sind.
Granulats pour travaux de construction - Partie 1 : caractéristiques
Le présent document spécifie les caractéristiques des granulats, c’est-à-dire les granulats sans filler d’apport (voir 3.1.1 a) et les fillers d’apport (voir 3.1.1 b), utilisés, avec ou sans exigences de sécurité rigoureuses, pour produire :
a) du béton destiné aux bâtiments, routes et autres travaux de génie civil,
b) des mélanges hydrocarbonés et enduits superficiels destinés aux routes, aérodromes et autres zones de circulation,
c) des mortiers, des enduits et des chapes, par exemple mortier de maçonnerie, mortier pour plancher / chape, surfaçage des parois intérieures (mortier pour enduit), enduit des parois extérieures, matériaux spéciaux de scellement, coulis pour les bâtiments, routes et travaux de génie civil ;
d) matériaux traités aux liants hydrauliques et matériaux non traités utilisés pour les travaux de génie civil et pour la construction des chaussées.
S’agissant de l’origine des matériaux et du processus de production, le présent document couvre les granulats naturels (voir 3.1.2), les granulats artificiels (voir 3.1.3), les granulats recyclés (voir 3.1.4), et les mélanges réalisés à partir de ces matériaux.
Les granulats couverts dans ce document sont :
a) les granulats sans filler d’apport, y compris les gravillons (voir 3.1.8), les grits (voir 3.1.11), les sables (voir 3.1.12), les graves (voir 3.1.13), les granulats de classe naturelle (voir 3.1.14) ; et
b) les fillers d’apport (voir 3.1.15).
Les gravillons couverts dans ce document sont les gravillons de même taille (voir 3.1.9) et les gravillons de classe granulaire étendue (voir 3.1.10).
Les fillers d’apport couverts dans ce document sont les fillers naturels (voir 3.1.16), les fillers artificiels (voir 3.1.18), les fillers additivés (voir 3.1.19), les fillers composites (voir 3.1.20) et les fillers recyclés (voir 3.1.21). Les fillers naturels comprennent les fillers d’origine calcaire (voir 3.1.17).
Ce document ne couvre pas :
— les granulats naturels et artificiels dont la masse volumique réelle après séchage est inférieure ou égale à 2,00 Mg/m3, qui sont déjà spécifiés dans le projet de norme prEN 13055:2021,
— les granulats recyclés dont la masse volumique réelle est inférieure à 1,50 Mg/m3,
— les granulats dont la dimension maximale nominale est supérieure à 90 mm,
— les enrochements, qui sont déjà spécifiés dans le projet de norme prEN13383-1:2021,
— les granulats pour ballasts de voies ferrées, qui sont déjà spécifiés dans le projet de norme prEN 13450 1:2021,
— l’utilisation de granulats présents dans les mélanges hydrocarbonés de réemploi, l’asphalte de réemploi utilisé comme constituant des mélanges hydrocarbonés étant déjà spécifié dans l’EN 13108 8:2016,
— l’utilisation de granulats comme sol,
— l’utilisation de granulats dans les terrassements, qui sont déjà spécifiés dans l’EN 16907 2:2018.
Agregati za gradbena dela - 1. del: Značilnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2021
Agregati za gradbena dela - 1. del: Značilnosti
Aggregates for construction works - Part 1: Characteristics
Gesteinskörnungen für Bauwerke - Teil 1: Produktnorm
Granulats pour travaux de construction - Partie 1 : caractéristiques
Ta slovenski standard je istoveten z: prEN 17555-1
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 91.100.15 Will supersede EN 12620:2002+A1:2008, EN
13043:2002, EN 13139:2002, EN
13242:2002+A1:2007
English Version
Aggregates for construction works - Part 1: Characteristics
Granulats pour travaux de construction - Partie 1 : Gesteinskörnungen für Bauwerke - Teil 1:
caractéristiques Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 154.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17555-1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 7
3 Terms, definitions, symbols and abbreviated terms . 9
3.1 Terms and definitions . 9
3.2 Symbols and abbreviated terms . 12
4 Characteristics . 15
4.1 Aggregates (not including added fillers) . 15
4.1.1 Particle size, shape and density . 15
4.1.2 Percentage of crushed particles . 20
4.1.3 Cleanliness . 20
4.1.4 Resistance to fragmentation/crushing . 27
4.1.5 Resistance to polishing/abrasion/wear/attrition . 28
4.1.6 Resistance to thermal shock . 30
4.1.7 Composition/content . 30
4.1.8 Volume stability . 34
4.1.9 Water absorption/suction . 35
4.1.10 Durability . 36
4.1.11 Stiffening properties of fine fraction of aggregates not including added filler . 39
4.1.12 Water solubility of fine fraction of aggregates not including added filler. 40
4.2 Added fillers . 40
4.2.1 Fineness / Particle size and density . 40
4.2.2 Composition/content . 40
4.2.3 Cleanliness . 42
4.2.4 Stiffening properties . 43
4.2.5 Water solubility and susceptibility . 45
4.2.6 Soundness/volume stability . 46
4.2.7 Loss on ignition (for fly ashes only) . 46
5 Sampling and testing methods . 47
5.1 Testing methods . 47
5.1.1 General . 47
5.1.2 Methylene blue value . 47
5.1.3 Testing for carbonate content of added composite filler . 47
5.1.4 Testing for carbonate content of filler of limestone origin . 48
5.1.5 Testing for calcium hydroxide content of mixed filler . 48
5.2 Sampling . 48
6 Assessment and Verification of Constancy of Performance – AVCP . 48
6.1 General . 48
6.2 Assessment of performance . 48
6.2.1 General . 48
6.2.2 Test samples, testing and assessment criteria . 49
6.3 Verification of constancy of performance . 54
6.3.1 Factory production control (FPC) . 54
6.3.2 Initial inspection of factory and of FPC for AVCP 2+ only . 70
6.3.3 Continuous surveillance of FPC for AVCP 2+ only . 70
7 Marking, labelling and packaging . 70
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No.305/2011 . 72
Bibliography . 88
European foreword
This document (prEN 17555-1:2021) has been prepared by Technical Committee CEN/TC 154
“Aggregates”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede the following set of standards:
— EN 12620:2002+A1:2008,
— EN 13043:2002, together with EN 13043:2002/AC:2004,
— EN 13139:2002, together with EN 13139:2002/AC:2004, and
— EN 13242:2002+A1:2007.
The most significant technical changes compared to EN 12620:2002+A1:2008, EN 13043:2002,
together with EN 13043:2002/AC:2004, EN 13139:2002, together with EN 13139:2002/AC:2004, and
EN 13242:2002+A1:2007 include:
a) unification and clarifications of the scope statement;
b) unification and improvement of definitions for aggregate families and other matters which were
common across the four main aggregate standards EN 12620, EN 13043, EN 13139 and EN 13242,
i.e. for coarse, fine, all-in aggregates, natural graded aggregates, grit and added fillers;
c) updating and improving references to supporting test methods;
d) consolidation of classes for characteristics, including:
a. merging of classes which were common across the four main aggregate standards: EN 12620,
EN 13043, EN 13139 and EN 13242;
b. addition of classes to respond to requests from Member States;
c. addition of intermediate classes to provide a more uniform sequence;
e) with regard to aggregates (not including added filler):
a. unification of overall limits for graded coarse aggregates at mid-size sieves;
b. removal of clauses referring to tolerances on grading;
c. deletion of classes (and replacement with a simple level declaration) for proportions of
constituents of recycled aggregates and for water absorption linked to freeze thaw resistance;
d. addition of new classes for the following: grading, particle shape, crushed particles, fines
content, sand equivalent value; methylene blue value; shell content, lightweight
contaminators, resistance to fragmentation, resistance to wear, resistance to abrasion from
studded tyres, total sulfur content, water soluble sulfate content of recycled aggregates, effect
of organic contaminators on the rate of setting and hardening of concrete mortar and
hydraulically bound mixtures – recycled aggregates, resistance to weathering – magnesium
sulfate soundness;
e. introduction of aggregate proxy characteristics and classes for the following:, susceptibility to
attrition; resistance to weathering – water absorption; water soluble sulfate content of coarse
natural aggregates; resistance to freezing and thawing in the presence of salt;
f. formal addition of characteristics and some classes for the fine fraction of aggregates not
including added filler. These are identical to the equivalent tests for added fillers and
previously were just cross referenced to filler tests;
g. removal of simple petrographic description from the characteristics and inclusion instead
under the marking labelling and packaging clause;
f) with regard to added fillers:
a. addition of new classes for total sulfur content, harmful fines, water content, volume of voids
and change of the softening point, carbonate content of filler of limestone origin, loss on
ignition;
b. removal of the clause relating to specific surface area of added filler;
c. introduction of a new characteristic and classes for carbonate content of composite filler;
g) restructuring of all clauses to be in line with the requirements of the Construction Product
Regulations;
h) introduction of revised AVCP clauses and tables, although minimum test frequencies are almost
unchanged.
Provisions for other types of aggregates and their intended uses are specified in the following
European Standards:
— prEN 13055:2021, Lightweight aggregates
— prEN 13383-1:2021, Armourstone — Part 1: Characteristics
— prEN 13450-1:2021, Aggregates for railway ballast — Part 1: Characteristics
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association.
For relationship with Regulation (EU) No. 305/2011 on construction products (CPR), see informativ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.