EN 2714-004:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard

This standard specifies the characteristics of ink jet printable, single and multicore screened (braided) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between  55 °C and 260 °C.
It shall also be possible to mark these cables by hot stamp printing.
These markings shall be in accordance with EN 3838.
This standard is not valid for new study.

Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 004: Geschirmt (Umflechtung) und ummantelt, Tintenstrahl-bedruckbar - Produktnorm

Diese Norm legt die Eigenschaften von tintenstrahl bedruckbaren, ein  und mehradrigen, geschirmten (Umflechtung) und ummantelten elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luft¬fahrzeugen bei Betriebstemperaturen zwischen -55 °C und 260 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung zu kennzeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen.
Diese Norm gilt nicht für neue Untersuchungen.

Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 004 : Blindés (tressés) et gainés, marquables au jet d'encre - Norme de produit

Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 004. del: Oklopljeni (opleteni) in oplaščeni, z možnostjo brizganega tiskanja - Standard za proizvod

General Information

• Status: Published
• Publication Date: 22-Aug-2006
• Withdrawal Date: 27-Feb-2007
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 2714-004:2009 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 004: Geschirmt (Umflechtung) und ummantelt, Tintenstrahl-bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 004 : Blindés (tressés) et gainés, marquables au jet d'encre - Norme de produitAerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2714-004:2006SIST EN 2714-004:2009en,de01-junij-2009SIST EN 2714-004:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2714-004
August 2006 ICS 49.060 English Version
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 004 : Blindés (tressés) et gainés, marquables au jet d'encre - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 004: Geschirmt (Umflechtung) und ummantelt, Tintenstrahl bedruckbar - Produktnorm This European Standard was approved by CEN on 19 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2714-004:2006: ESIST EN 2714-004:2009

These markings shall be in accordance with EN 3838. This standard is not valid fo
...