EN ISO 14356:2024
(Main)Dentistry - Duplicating material (ISO 14356:2024)
Dentistry - Duplicating material (ISO 14356:2024)
This document specifies the requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly blocked-out master models.
Zahnheilkunde - Dublierwerkstoffe (ISO 14356:2024)
Dieses Dokument legt die Anforderungen und Prüfverfahren für dentale Dublierwerkstoffe fest, die hauptsächlich zur Herstellung von flexiblen Formen vorgesehen sind, die für die Herstellung von positiven Kopien aus hitzebeständiger Einbettmasse eines funktionsgerecht ausgeblockten Meistermodells benötigt werden.
Médecine bucco-dentaire - Produits pour duplication (ISO 14356:2024)
Le présent document spécifie les exigences et les essais concernant les produits pour duplication utilisés en médecine bucco-dentaire et qui sont principalement destinés à la confection de moules souples nécessaires pour fabriquer des copies positives de revêtement réfractaire à partir de modèles originaux correctement comblés.
Zobozdravstvo - Duplikacijski material (ISO/FDIS 14356:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 14356:2022
01-oktober-2022
Zobozdravstvo - Duplikacijski material (ISO/DIS 14356:2022)
Dentistry - Duplicating material (ISO/DIS 14356:2022)
Zahnheilkunde – Dublierwerkstoffe (ISO/DIS 14356:2022)
Médecine bucco-dentaire - Produits pour duplication (ISO/DIS 14356:2022)
Ta slovenski standard je istoveten z: prEN ISO 14356
ICS:
11.060.10 Zobotehnični materiali Dental materials
oSIST prEN ISO 14356:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 14356:2022
oSIST prEN ISO 14356:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14356
ISO/TC 106/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2022-08-17 2022-11-09
Dentistry — Duplicating material
Art dentaire — Produits pour duplication
ICS: 11.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14356:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
oSIST prEN ISO 14356:2022
ISO/DIS 14356:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14356
ISO/TC 106/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
Dentistry — Duplicating material
Art dentaire — Produits pour duplication
ICS: 11.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14356:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
oSIST prEN ISO 14356:2022
ISO/DIS 14356:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification by types . 4
5 Material characteristics and properties — Requirements . 4
5.1 General . 4
5.2 Melting temperature — Type 1 materials . 4
5.3 Pouring temperature — Type 1 materials . 4
5.4 Component colours — Type 2 materials . 4
5.5 Detail reproduction . 4
5.6 Compatibility with refractory investment (and gypsum if applicable) . 4
5.7 Elastic recovery . 4
5.8 Tear strength. 4
5.9 Resistance to fungal growth — Type 1 materials only . 5
6 Sampling . 5
7 Test methods — General . 5
7.1 Laboratory conditions . 5
7.2 Verification of apparatus function . 5
7.3 Specimen preparation and testing . 5
7.3.1 General . 5
7.3.2 Preparation of Type 1 materials . 5
7.3.3 Preparation of Type 2 materials . 5
7.4 Pass/fail determinations . 6
7.5 Expression of test results. 6
8 Specific specimen preparation and test procedures . 6
8.1 Melting temperature test — Type 1 materials only . 6
8.2 Detail reproduction test . 7
8.3 Test for compatibility with refractory investment (and gypsum if applicable) . 8
8.3.1 Apparatus and materials . 8
8.3.2 Specimen preparation . 8
8.3.3 Test procedure. 9
8.3.4 Pass/fail determination and expression of results . 9
8.4 Elastic recovery test . 9
8.5 Tear strength test .12
8.5.1 Apparatus and materials .12
8.5.2 Specimen preparation (5 specimens) .13
8.5.3 Test procedure. 14
8.5.4 Calculation of results . 14
8.5.5 Pass/fail determination and expression of results .15
8.6 Fungal growth resistance test — Type 1 agar materials only . 15
8.6.1 Apparatus and materials . 15
8.6.2 Specimen preparation (1 test specimen and 1 control specimen) .15
8.6.3 Test procedure.15
8.6.4 Pass/fail determination . 15
8.6.5 Expression of results . 15
9 Requirements for packaging .15
10 Requirements for labelling .15
11 Instructions for use — Required information .16
Annex A (informative) Optional procedure for tear test .27
iii
oSIST prEN ISO 14356:2022
ISO/DIS 14356:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14356 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 2,
Prosthodontic materials.
This second edition cancels and replaces the first edition (ISO 14356:2003), which has been technically
revised. This revision updates figures to be consistent with other impression material related
standards.
iv
oSIST prEN ISO 14356:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 14356:2022(E)
Dentistry — Duplicating material
1 Scope
This International Standard specifies requirements and tests for the duplicating materials used
in dentistry which are primarily intended for forming flexible moulds needed to produce positive
refractory investment copies of properly blocked-out master models.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated refe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.