EN 6049-003:2009

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard

This standard defines the characteristics of tubular braided expandable mechanical protection sleeves for electrical cable and cable bundles made from Meta-aramid fibres and provided with a water repelled protection.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 003: Geflecht, röhrenförmig, dehnbar - Produktnorm

Diese Norm legt die Eigenschaften von dehnbaren Geflechtschläuchen als mechanischen Schutz für elektrische Leitungen und Leitungsbündel fest, die aus Meta Aramidfasern mit einer wasserabweisenden Schutzschicht hergestellt sind.

Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 003: Tresse, tubulaire, expansible - Norme de produit

Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih vlaken - 003. del: Opletena, cevasta, prožna - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 18-Aug-2009
• Withdrawal Date: 28-Aug-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Aug-2018
• Ref Project: SIST EN 6049-003:2009 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard

Relations

• Replaced By: EN 6049-003:2018 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWDDUDPLGQLKRGLuft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschlauche aus Meta-Aramidfasern - Teil 003: Geflecht, rohrenformig, dehnbar - Produkt NormSerie aerospatiale - Cables electriques, installation - Gaine de protection en fibres meta-aramides - Partie 003: Tresse, tubulaire, expansible - Norme de produitAerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 6049-003:2009SIST EN 6049-003:2009en01-oktober-2009SIST EN 6049-003:2009SLOVENSKI
STANDARD



SIST EN 6049-003:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 6049-003
August 2009 ICS 49.060 English Version
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard
Série aérospatiale - Câbles électriques, installation -Gaine de protection en fibres méta-aramides - Partie 003:
Tresse, tubulaire, expansible - Norme de produit
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschlauche aus Meta-Aramidfasern - Teil 003: Geflecht, rohrenformig, dehnbar - Produkt Norm This European Standard was approved by CEN on 20 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 6049-003:2009: ESIST EN 6049-003:2009



EN 6049-003:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Characteristics .4 5 Test methods .6 6 Designation .7 7 Marking .7
SIST EN 6049-003:2009



EN 6049-003:2009 (E) 3 Foreword This document (EN 6049-003:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulati
...