EN 4641-001:2018

Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification

This European Standard specifies the general characteristics, conditions for qualification, acceptance and quality assurance, as well as the test methods and groups for fibre optic cables with a cladding of 125 µm outside diameter.

Luft- und Raumfahrt - Lichtwellenleiterkabel, Mantelaußendurchmesser 125 µm - Teil 001: Technische Spezifikation

Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 001 : Spécification technique

Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 001. del: Tehnična specifikacija

Ta evropski standard določa splošne značilnosti, pogoje kvalifikacije, sprejemljivosti in zagotavljanja kakovosti ter preskusne metode in skupine za optične kable z zunanjim premerom obloge 125 µm.

General Information

• Status: Published
• Publication Date: 24-Jul-2018
• Withdrawal Date: 30-Jan-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 10 - Optical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Jul-2018
• Completion Date: 25-Jul-2018
• Ref Project: SIST EN 4641-001:2018 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification

Relations

• Replaces: EN 4641-001:2009 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification
• Effective Date: 08-Jun-2022
• Revised: prEN 4641-001 - Aerospace series - Cables, optical - Part 001: Technical specification
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Kabel, optisch, 125 µm Außendurchmesser des Fasermantels - Teil 001: Technische SpezifikationSérie aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 001 : Spécification techniqueAerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification49.060Aerospace electric equipment and systems33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 4641-001:2018SIST EN 4641-001:2018en,fr,de01-oktober-2018SIST EN 4641-001:2018SLOVENSKI
STANDARDSIST EN 4641-001:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4641-001
July
t r s z ICS
v {ä r x r Supersedes EN
v x v sæ r r sã t r r {English Version
Aerospace series æ Cablesá opticalá
s t w
Ám diameter cladding æ Part
r r sã Technical specification Série aérospatiale æ Câblesá optiquesá diamètre extérieur de la gaine optique
s t w
Ám æ Partie
r r s ã Spécification technique
Luftæ und Raumfahrt æ Lichtwellenleiterkabelá Mantelaußendurchmesser
s t w
Ám æ Teil
r r sã Technische Spezifikation This European Standard was approved by CEN on
t March
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x v sæ r r sã t r s z ESIST EN 4641-001:2018

Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Required characteristics . 5 5 Test methods . 6 6 Quality assurance . 8 7 Designation and marking . 12 8 Delivery conditions . 14 9 Storage . 14
EN 2591-602, Aerospace series — Elements of electrical and optical connection — Test methods — Part 602: Optical elements — Variation of attenuation and optical discontinuity EN 3745-100 *, Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 100: General EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables EN 3909, Aerospace series — Test fluids and test methods for electrical and optical components and sub-assemblies EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace Standard Products IEC 60793-1-42, Optical fibres — Part 1-42: Measurement methods and test procedures — Chromatic dispersion ISO 2574, Aircraft — Electrical cables — Identification marking 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3745-100 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses:
IEC Electropedia: available at http://www.electropedia.org/
ISO Online browsing platform: available at http://www.iso.org/obp 3.1 tight structure cable structure that allows no movement of the fibre and inner jacket between the inner jacket and the outer strength members
* And all parts quoted in this European Standard. SIST EN 4641-001:2018

See Figure 1.
Key 1 Buffer 2 Primary coating 3 Cladding 4 Core Figure 1 — Fibre construction (axial view) 4.4 Cable construction The typical requirements of the cable shall be an outer jacket, strength member, buffer and fibre, which is protected by a primary coating. See example at Figure 2. SIST EN 4641-001:2018

Key 1 Outer jacket 2 Strength member 3 Inner sheath 4 Buffer 5 Core 6 Cladding 7 Primary coating Figure 2 — Example of cable construction 5 Test methods 5.1 Tests in accordance with EN 3745-100 5.1.1 Optical fibre See Table 1. Table 1 — Optical fibre test methods Test method EN 3745- Designation of test Test performance/conditions/criteria 201 Visual examination The primary coating and buffer shall have the correct identification outer colour if specified in the product standard. 202 Fibre dimensions See product standard. 501 Optical fibre proof test See product standard. 301 Method A Attenuation See product standard. 302 Numerical aperture See product standard. 403 Bandwidth See product standard. SIST EN 4641-001:2018
...