EN 4346:2007

Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm

This standard specifies the requirements relating to:
Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted,
softened, forging stock a or D ≤ 300 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht, Schmiedevormaterial a oder D ≤ 300 mm

Diese Norm legt die Anforderungen an
Stahl FE PM1505 (X1CrNiMoAlTi12 9 2)
Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen
weichgeglüht
Schmiedevormaterial
a oder D≤ 300 mm
für die Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) - Élaboré sous vide par induction et refondu à l'électrode consommable, adouci, produits destinés à la forge a ou D ≤ 300 mm

Aeronavtika - Jeklo FE-PM1505 (X1CrNiMoAlTi12-9-2) - Materiali za kovanje a ali D <= 300 mm, mehčani, taljeni z vakuumsko indukcijo in pretaljeni s talilno elektrodo

General Information

• Status: Published
• Publication Date: 28-Aug-2007
• Withdrawal Date: 28-Feb-2008
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 30-Jun-2017
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN 4346:2007 - Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D <= 300 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D <= 300 mmSérie aérospatiale - Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) - Élaboré sous vide par induction et refondu a l'électrode consommable, adouci, produits destinés a la forge a ou D <= 300 mmLuft- und Raumfahrt - Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht, Schmiedevormaterial a oder D <= 300 mmTa slovenski standard je istoveten z:EN 4346:2007SIST EN 4346:2007en49.025.10JeklaSteelsICS:SLOVENSKI
STANDARDSIST EN 4346:200701-november-2007

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4346
August 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm
Série aérospatiale - Acier FE-PM1505 (X1CrNiMoAlTi12-9-2) - Élaboré sous vide par induction et refondu à l'électrode consommable, adouci, produits destinés à la forge a ou D ≤300 mm
Luft- und Raumfahrt - Stahl FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht, Schmiedevormaterial a oder D ≤ 300 mm This European Standard was approved by CEN on 15 March 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4346:2007: E
...