prEN IEC 60794-1-305:2022
(Main)Optical fibre cables - Part 1-305: Generic specifications – Basic optical cable test procedures – Cable element test methods - Ribbon tear (separability), Method G5
<p>Optical fibre cables - Part 1-305: Generic specifications – Basic optical cable test procedures – Cable element test methods - Ribbon tear (separability), Method G5</p>
Lichtwellenleiterkabel – Teil 1-305: Allgemeine Festlegungen – Grundlegende Prüfverfahren für Lichtwellenleiterkabel – Prüfverfahren für Kabelelemente – Bänderriss (Trennbarkeit), Verfahren G5
Câbles à fibres optiques – Partie 1-305: Spécification générique – Procédures fondamentales d’essai des câbles optiques – Méthodes d’essai des éléments de câble – Déchirure longitudinale du ruban (séparabilité), Méthode G5
Optični kabli - 1-305. del: Splošne specifikacije - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Vzdolžno trganje (ločljivost), metoda G5
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-305:2022
01-april-2022
Optični kabli - 1-305. del: Splošne specifikacije - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Vzdolžno trganje(ločljivost), metoda G5
Optical fibre cables - Part 1-305: Generic specifications - Basic optical cable test
procedures - Cable element test methods - Ribbon tear (separability), Method G5Ta slovenski standard je istoveten z: prEN IEC 60794-1-305:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-305:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 60794-1-305:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-305:2022
86A/2158/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-305 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-21 2022-04-15
SUPERSEDES DOCUMENTS:
86A/2105/CD, 86A/2137A/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.TITLE:
Optical fibre cables - Part 1-305: Generic specifications – Basic optical cable test procedures –
Cable element test methods - Ribbon tear (separability), Method G5PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-305:2022
IEC CDV 60794-1-305/Ed1 © IEC:2022 – 2 – 86A/2158/CDV
1 CONTENTS
3 FOREWORD ........................................................................................................................... 3
4 INTRODUCTION ..................................................................................................................... 5
5 1 Scope .............................................................................................................................. 6
6 2 Normative references ...................................................................................................... 6
7 3 Terms and definitions ...................................................................................................... 6
8 4 General requirements ...................................................................................................... 6
9 5 Method G5: Ribbon tear (separability) ............................................................................. 7
10 5.1 Object ..................................................................................................................... 7
11 5.2 Sample ................................................................................................................... 7
12 5.3 Apparatus ............................................................................................................... 8
13 5.4 Procedure ............................................................................................................... 8
14 5.5 Requirements ......................................................................................................... 9
15 5.6 Details to be specified ............................................................................................. 9
16 5.7 Details to be reported ............................................................................................. 9
17 Annex A (informative/normative) Annex title ........................................................................ 10
18 A.1 First annex heading (optional) ............................................................................... 10
19 Bibliography .......................................................................................................................... 11
21 Figure 1 – Sample preparation for ribbon separability test ...................................................... 8
22 Figure 2 – Separability procedure ........................................................................................... 9
---------------------- Page: 4 ----------------------oSIST prEN IEC 60794-1-305:2022
IEC CDV 60794-1-305/Ed1 © IEC:2022 – 3 – 86A/2158/CDV
25 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26 ____________
28 OPTICAL FIBRE CABLES
29 -
30 Part 1-305: Generic specifications – Basic optical
31 cable test procedures – Cable element test methods - Ribbon tear
32 (separability), Method G5
34 FOREWORD
35 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
36 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
37 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
38 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
39 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
40 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
41 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
42 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
43 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
44 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
45 consensus of opinion on the relevant subjects since each technical committee has representation from all
46 interested IEC National Committees.47 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
48 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
49 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
50 misinterpretation by any end user.51 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
52 transparently to the maximum extent possible in their national and regional publications. Any divergence between
53 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
54 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
55 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
56 services carried out by independent certification bodies.57 6) All users should ensure that they have the latest edition of this publication.
58 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
59 members of its technical committees and IEC National Committees for any personal injury, property damage or
60 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
61 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
62 Publications.63 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
64 indispensable for the correct application of this publication.65 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
66 rights. IEC shall not be held responsible for identifying any or all such patent rights.
68 IEC 60794-1-305 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical
69 committee 86: Fibre optics.70 This first edition of IEC 60794-1-305 cancels and replaces Method G5 of the second edition of IEC
71 60794-1-23:2019, which is withdrawn. It includes an editorial revision, based on the new structure and
72 numbering system for optical fibre test methods. There are no specific technical changes with respect
73 to the previous edition.74 The optical cable element test methods contained
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.