EN 61755-3-1:2009

Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre

This part of IEC 61755 defines certain dimensional limits of a 2,5 mm and a 1,25 mm diameter cylindrical zirconia (ZrO2) PC ferrule optical interface to meet specific requirements for fibre-to-fibre interconnection. Ferrules made from the material specified in this document are suitable for use in categories C, U, E, and O as defined in IEC 61753-1. The contents of the corrigendum of January 2009 have been included in this copy.

Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-1: Optische Schnittstellen mit nicht abgeschrägten Zirkonium-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser für Einmodenfasern mit physikalischem Kontakt

Interfaces optiques de connecteurs pour fibres optiques - Partie 3-1: Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, fibres unimodales

La présente partie de la CEI 61755 définit certaines limites dimensionnelles des interfaces optiques avec une férule PC cylindrique en zircone (ZrO2) de diamètre de 2,5 mm et 1,25 mm, devant être satisfaites pour répondre aux exigences spécifiques aux interconnexions fibre-à-fibre. Les férules constituées par le matériau spécifié dans ce document sont adaptées à une utilisation dans les catégories C, U, E et O définies dans la CEI 61753-1. Le contenu du corrigendum de janvier 2009 a été pris en considération dans cet exemplaire.

Optični vmesniki konektorja optičnih vlaken - 3-1. del: Optični vmesnik s cilindrično cirkonsko spojko za kote 8 stopinj-PC, enorodna vlakna (IEC 61755-3-1:2006 (MOD) + corrigendum Jan. 2009)

General Information

• Status: Published
• Publication Date: 26-Feb-2009
• Withdrawal Date: 30-Nov-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Completion Date: 27-Feb-2009
• Ref Project: SIST EN 61755-3-1:2009 - Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre (IEC 61755-3-1:2006 (MOD) + corrigendum Jan. 2009)

Relations

• Replaced By: EN IEC 61755-3-1:2024 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-1: Connector parameters of dispersion unshifted single-mode physically contacting fibres - Non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2009
2SWLþQLYPHVQLNLNRQHNWRUMDRSWLþQLKYODNHQGHO2SWLþQLYPHVQLNV
FLOLQGULþQRFLUNRQVNRVSRMNR]DNRWHVWRSLQM3&HQRURGQDYODNQD,(&
02'FRUULJHQGXP-DQ
Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm
diameter cylindrical full zirconia PC ferrule, single mode fibre (IEC 61755-3-1:2006
(MOD) + corrigendum Jan. 2009)
Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-1: Optische
Schnittstellen von Zirkonium-Stiften mit 2,5 mm und 1,25 mm Durchmesser für nicht
abgeschrägte Einmodenfasern mit physikalischem Kontakt (IEC 61755-3-1:2006 (MOD)
+ corrigendum Jan. 2009)
Interfaces optiques de connecteurs pour fibres optiques -- Partie 3-1: Interfaces
optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, fibres
unimodales (CEI 61755-3-1:2006 (MOD) + corrigendum Jan. 2009)
Ta slovenski standard je istoveten z: EN 61755-3-1:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61755-3-1
NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic connector optical interfaces -
Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical full zirconia PC ferrule, single mode fibre
(IEC 61755-3-1:2006, modified + corrigendum 2009)

Interfaces optiques de connecteurs  Optische Schnittstellen
pour fibres optiques - für Lichtwellenleiter-Steckverbinder -
Partie 3-1: Interfaces optiques, Teil 3-1: Optische Schnittstellen mit
férules PC en zircone plein cylindrique nicht abgeschrägten Zirkonium-Ferrulen
de diamètre 2,5 mm et 1,25 mm, mit 2,5 mm und 1,25 mm Durchmesser
fibres unimodales für Einmodenfasern mit
(CEI 61755-3-1:2006, modifiée + physikalischem Kontakt
corrigendum 2009) (IEC 61755-3-1:2006, modifiziert +
Corrigendum 2009)
This European Standard was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-3-1:2009 E
Foreword
The text of the International Standard IEC 61755-3-1:2006, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, together with the common
modifications prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect,
passive and connectorised components, was submitted to the formal vote and was approved by
CENELEC as EN 61755-3-1 on 2008-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-12-01
__________
Endorsement notice
The text of the International Standard IEC 61755-3-1:2006 + corrigendum January 2009 was approved by
CENELEC as a European Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Table 1 – Optical interface parameter values for 2,5 mm diameter ferrule
In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm).
Table 2 – Optical interface parameter values for 1,25 mm diameter ferrule
In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm).
Bibliography
The following notes have to be added for the standards indicated:
IEC 61753-1 NOTE  Harmonized as EN 61753-1:2007 (not modified).
IEC 61754 NOTE  Harmonized in EN 61754 series (partially modified).
IEC 61755-2-1 NOTE  Harmonized as EN 61755-2-1:2006 (not modified).
___________
NORME CEI
INTERNATIONALE
IEC
61755-3-1
INTERNATIONAL
Première édition
STANDARD
First edition
2006-07
Interfaces optiques de connecteurs
pour fibres optiques –
Partie 3-1:
Interfaces optiques, férules PC en zircone
plein cylindrique de diamètre 2,5 mm
et 1,25 mm, fibres unimodales
Fibre optic connector optical interfaces –
Part 3-1:
Optical interface, 2,5 mm and 1,25 mm
diameter cylindrical full zirconia PC ferrule,
single mode fibre
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61755-3-1  IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC CONNECTOR OPTICAL INTERFACES –

Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical full zirconia PC ferrule, single mode fibre

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61755-3-1 has been prepared by sub-committee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2306/FDIS 86B/2360/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

61755-3-1  IEC:2006 – 5 –
A list of all parts of the IEC 6
...