EN 187103:2003
(Main)Family specification - Optical fibre cables for indoor applications
Family specification - Optical fibre cables for indoor applications
This family specification covers optical cables for telecommunication application to be used indoor. This specification does not cover cable assemblies, such as connectorized jumper cable, or the functional requirements for cable break-out (fan out). It also not covers cables for LAN applications and cables incorporating multimode fibres. Clause 5 of this standard describes a blank detail specification for optical telecommunication cables to be used for indoor cables. It incorporates some minimum requirements common to all European countries. Detail specifications may be prepared based on this family specification following in particular requirements of clause 5.
Familienspezifikation - Lichtwellenleiterkabel zur Anwendung in Innenräumen
Spécification - Câbles à fibres optiques pour applications intérieures
Rodovne specifikacije – Kabli z optičnimi vlakni za notranjo uporabo*
General Information
Standards Content (Sample)
SIST EN 187103:2004SLOVENSKIseptember 2004
STANDARDRodovne specifikacije – Kabli z optičnimi vlakni za notranjo uporabo*Family specification - Optical fibre cables for indoor applications©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 187103:2004(en)ICS33.180.10
EUROPEAN STANDARD
EN 187103 NORME EUROPÉENNE EUROPÄISCHE NORM
January 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 187103:2003 E
ICS 33.180.20
English version
Family specification –
Optical fibre cables for indoor applications
Spécification –
Câbles à fibres optiques
pour applications intérieures
Familienspezifikation - Lichtwellenleiterkabel zur Anwendung
in Innenräumen
This European Standard was approved by CENELEC on 2002-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 187103:2003 - 2 - Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 86A, Optical fibres and optical fibre cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 187103 on 2002-03-05.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-08-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01
This standard has been produced in accordance with a specialised agreement on work repartition and co-operation for standardization concerning fibre optics and is part of the CEN/CENELEC/ETSI (European Telecommunications Standards Institute) co-operation agreement.
It uses information provided by the ETSI on functional and system related aspects by means of an Interim European Telecommunication Standard (I-ETS).
The document I-ETS 300 644, Optical fibre cables for indoor applications, prepared by ETSI/TM1/WG1, has been reviewed and completed by the CENELEC TC 86A for incorporation within the set of EN 1871xx standards prepared using a similar process.
- 3 - EN 187103:2003 Contents Page 1 Scope.4 2 General.4 3 Normative references.4 4 Symbols and abbreviations.5 4.1 Symbols.5 4.2 Abbreviations.6 5 Family specification for optical telecommunication cables for indoor application (blank detail specification and minimum requirements).7 5.1 Cable description.7 5.2 Optical fibres.9 5.2.1 Single mode dispersion unshifted (b1.1) optical fibre.9 5.2.2 Single mode dispersion shifted (b1.2) optical fibre.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.