EN 61274-1:2012

Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification

IEC 61274-1:2011 applies to fibre optic adaptors for all types, sizes and structures of optical fibre connectors. It includes: - adaptor requirements; - quality assessment procedures. This standard does not cover test and measurement procedures, which are described in the IEC 61300 series. This third edition cancels and replaces the second edition published in 2007, and constitutes a technical revision. The specific technical changes from the previous edition include removal of quality assessment procedure, to add the definition of plug-socket configuration, to reconsider a drawing showing the relationship between IEC 60874, IEC 61753, IEC 61754 series of standards, and updating the normative references.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Kupplungen für Lichtwellenleiter-Steckverbinder - Teil 1: Fachgrundspezifikation

Dispositifs d'interconnexion et composants passifs à fibres optiques - Raccords de connecteurs de fibres optiques - Partie 1: Spécification générique

La CEI 61274-1:2011 s'applique aux raccords de fibres optiques pour tout type, toute dimension et toute structure de connecteurs à fibres optiques. Elle comprend: - les exigences relatives aux raccords; - les procédures d'assurance de la qualité. Cette norme ne comprend pas les procédures de mesure et d'essais, ces dernières étant décrites dans la série de normes CEI 61300. Cette troisième édition annule et remplace la deuxième édition publiée en 2007, et constitue une révision technique. Les évolutions techniques spécifiques par rapport à l'édition précédente consistent en la suppression de la procédure d'assurance de la qualité, l'addition de la définition de la configuration fiche-socle, la révision du schéma relatif à la correspondance entre les normes des séries CEI 60874, CEI 61753, et CEI 61754, et la mise à jour des références normatives.

Optični spojni elementi in pasivne komponente - Prilagodilniki (adapterji) za optične konektorje - 1. del: Rodovna specifikacija (IEC 61274-1-1:2011)

Ta del standarda IEC 61274 se uporablja za optične adapterje za vse vrste, velikosti in strukture optičnih konektorjev. Specifikacija zajema: – zahteve za adapterje; – postopke za oceno kakovosti. Ta standard ne zajema preskusnih in merilnih postopkov, ki so opisani v skupini IEC 61300.

General Information

• Status: Withdrawn
• Publication Date: 22-Mar-2012
• Withdrawal Date: 28-Dec-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Ref Project: SIST EN 61274-1:2012 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification (IEC 61274-1-1:2011)

Relations

• Replaces: EN 61274-1:2008 - Adaptors for fibre optic connectors - Part 1: Generic specification
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61274-1:2012
01-maj-2012
1DGRPHãþD
SIST EN 61274-1:2008
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH3ULODJRGLOQLNLDGDSWHUML]D
RSWLþQHNRQHNWRUMHGHO5RGRYQDVSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Adaptors for fibre optic
connectors - Part 1: Generic specification (IEC 61274-1-1:2011)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Kupplungen für
Lichtwellenleiter-Steckverbinder - Teil 1: Fachgrundspezifikation (IEC 61274-1-1:2011)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Raccords de
connecteurs de fibres optiques - Partie 1: Spécification générique (CEI 61274-1-1:2011)
Ta slovenski standard je istoveten z: EN 61274-1:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61274-1:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61274-1:2012

---------------------- Page: 2 ----------------------

SIST EN 61274-1:2012

EUROPEAN STANDARD
EN 61274-1

NORME EUROPÉENNE
March 2012
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61274-1:2008


English version


Fibre optic interconnecting devices and passive components -
Adaptors for fibre optic connectors -
Part 1: Generic specification
(IEC 61274-1:2011)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Raccords de connecteurs de fibres Bauteile -
optiques - Kupplungen für Lichtwellenleiter-
Partie 1: Spécification générique Steckverbinder -
(CEI 61274-1:2011) Teil 1: Fachgrundspezifikation
(IEC 61274-1:2011)





This European Standard was approved by CENELEC on 2011-12-29. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61274-1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61274-1:2012
EN 61274-1:2012 - 2 -
Foreword
The text of document 86B/3273/FDIS, future edition 3 of IEC 61274-1, prepared by SC 86B, "Fibre optic
interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61274-1:2012.

The following dates are fixed:
(dop) 2012-09-29
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2012-12-29
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61274-1:2008.
The specific technical changes from EN 61274-1:2008 include removal of quality assessment procedure,
to add the definition of plug-socket configuration, to reconsider a drawing showing the relationship
between EN 60874, EN 61753, EN 61754 series of standards, and updating the normative references.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61274-1:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60874 series NOTE  Harmonized in EN 60874 series.
IEC 61274-1-1 NOTE  Harmonized as EN 61274-1-1.

--------
...