Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex)

Defines the requirements and the quality assessment procedures. Type SC-D(uplex) is a subfamily of two-way optical fibre connectors utilizing a push-pull coupling mechanism and cylindrical ferrules of 2,5 mm nominal diameter.

Steckverbinder für Lichtwellenleiter und LWL-Kabel - Teil 19: Rahmenspezifikation für LWL-Steckverbinder - Bauart SC-D(uplex)

Connecteurs pour fibres et câbles optiques - Partie 19: Spécification intermédiaire pour connecteur pour fibres optiques - Type SC-D(uplex)

Définit les exigences et les procédures d'assurance de la qualité. Le type SC-D(uplex) est une sous-famille de connecteurs à fibres optiques double voie caractérisé par un embout cylindrique avec diamètre nominal de 2,5 mm, et un mécanisme d'accouplement pousser/tirer.

Connectors for optical fibres and cables -- Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) (IEC 60874-19:1995 + corrigendum May 1996)

General Information

Status

Withdrawn

Publication Date

12-May-1997

Withdrawal Date

30-Nov-1997

ICS

33.180.20 - Fibre optic interconnecting devices

Technical Committee

CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components

Drafting Committee

IEC/SC 86B - IEC_SC_86B

Parallel Committee

IEC/SC 86B - IEC_SC_86B

Current Stage

9960 - Withdrawal effective - Withdrawal

Start Date

01-Mar-2006

Completion Date

01-Mar-2006

Ref Project

SIST EN 60874-19:1999 - Connectors for optical fibres and cables -- Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex)

Relations

Replaced By

EN 61754-4-1:2003 - Fibre optic connector interfaces - Part 4-1: Type SC connector family - Simplified receptacle SC-PC connector interfaces

Effective Date

29-Jan-2023

Buy Standard

Standard

EN 60874-19:1999

English language

16 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 60874-19:1999

SLOVENSKI STANDARD
SIST EN 60874-19:1999
01-julij-1999
Connectors for optical fibres and cables -- Part 19: Sectional specification for fibre
optic connector - Type SC-D(uplex) (IEC 60874-19:1995 + corrigendum May 1996)
Connectors for optical fibres and cables -- Part 19: Sectional specification for fibre optic
connector - Type SC-D(uplex)
Steckverbinder für Lichtwellenleiter und LWL-Kabel -- Teil 19: Rahmenspezifikation für
LWL-Steckverbinder - Bauart SC-D(uplex)
Connecteurs pour fibres et câbles optiques -- Partie 19: Spécification intermédiaire pour
connecteur pour fibres optiques - Type SC-D(uplex)
Ta slovenski standard je istoveten z: EN 60874-19:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 60874-19:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60874-19:1999

---------------------- Page: 2 ----------------------

SIST EN 60874-19:1999

---------------------- Page: 3 ----------------------

SIST EN 60874-19:1999

---------------------- Page: 4 ----------------------

SIST EN 60874-19:199
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC

EN IEC 63267-2-2:2024(Main)

Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-2: Connection parameters of physically contacting 50 μm core diameter fibres - Non-angled and angled for reference connector applications

SIST EN IEC 63267-2-2:2024

IEC 63267-2-2:2024 defines the dimensional limits of an optical interface for reference connections necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled and angled polished multimode reference connectors intended to be used for attenuation measurements in the field or factory. Several grades of reference connections are defined in this document. The multimode reference connections are terminated to restricted IEC 60793-2-10 A1-OM2b to A1-OM5b fibre at the 850 nm band only. The geometrical dimensions and tolerances of the specified reference connections have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.

Standard
16 pages
English language
sale 10% off
e-Library read for
1 day
Draft
11 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61753-071-02:2020/A1:2024(Amendment)

Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments

SIST EN IEC 61753-071-02:2021/A1:2024

Amendment
5 pages
English language
sale 10% off
e-Library read for
1 day
Draft
3 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 63267-2-1:2024(Main)

Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 µm core diameter fibres - Non-angled

SIST EN IEC 63267-2-1:2024

IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres. An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation. Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.

Standard
15 pages
English language
sale 10% off
e-Library read for
1 day
Draft
11 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61300-2-44:2024(Main)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components

SIST EN IEC 61300-2-44:2024

IEC 61300-2-44:2024 specifies a test to determine the influence of flexing under tensile load of the strain relief of fibre optic interconnecting devices or components. The intention is to simulate the number of flexing cycles which would typically be experienced during service life. This test is applied to both single fibre cable and multiple fibre cable. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) replaced active monitoring with transient loss for measurements during test; b) harmonized recommended severities according to IEC 61753-1.

Standard
12 pages
English language
sale 10% off
e-Library read for
1 day
Draft
9 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61300-2-6:2024(Main)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism

SIST EN IEC 61300-2-6:2024

IEC 61300-2-6:2023 is available as IEC 61300-2-6:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-2-6:2023 describes a test to ensure the coupling mechanism of a connector set or connector and device combination withstands the axial loads likely to be applied during normal service, and that the optical performance remains within the given specifications during this test. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of normative references; b) modification of the details to be specified; c) addition of optical monitoring.

Standard
13 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61300-2-11:2024(Main)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression

SIST EN IEC 61300-2-11:2024

IEC 61300-2-11:2023 is available as IEC 61300-2-11:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-2-11:2023 is to ensure that the captivation or the attachment of the cable to the fibre optic devices or components, for example fibre optic closures, will withstand compressive axial loads likely to be applied during normal service. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) added Terms and definitions clause; b) removed severity table for closures; c) added recommended severity for tubes and cables without strength member attachment.

Standard
12 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61753-021-06:2023(Main)

Fibre optic interconnecting devices and passive components - Performance standard - Part 021-06: Single-mode fibre optic connectors terminated as pigtails and patchcords for category OP+ – Extended outdoor protected environment

SIST EN IEC 61753-021-06:2024

IEC 61753-021-06:2023 defines the minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorised as meeting the IEC standard category OP+ (extended outdoor protected environment), as defined in IEC 61753-1. If tests were performed on the connectors terminated as pigtails or patchcords for category OP+HD and the product passed, the product will be automatically qualified or categorized as meeting the IEC standard for category OP+. If tests are performed on the connectors terminated as pigtails or patchcords for category OP+, and the product passes, the product will be automatically qualified or categorized as meeting the IEC standard for categories OP and C. This first edition cancels and replaces the first edition of IEC 61753-021-6 published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-021-6:2007: a) updated environmental category (from O to OP+), tests and their severities according to IEC 61753-1:2018; b) removed the copyright notice as it is no longer needed; c) changed title and scope to remove restrictions on attenuation and return loss grades; d) changed the term and definitions of the different types of test samples (pigtail test samples and patchcord test samples) used in the various tests to avoid confusion; e) removed the term and definition for small form factor (SFF) connectors as it is no longer used in the document; f) updated fibre naming conventions according to IEC 60793-2-50: and added provisions for B-657 fibres; g) added all the attenuation and return loss grades defined in IEC 61753-1; h) removed the static side load test; i) removed the need to perform all tests sequentially to align with other performance standards; j) added provisions for rectangular ferrule connectors; k) added Annex B for visual examination of the outer cable sheath movement of reinforced cables as an additional requirement for change of temperature, cable retention and flexing of the strain relief tests.

Standard
27 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61753-021-02:2023(Main)

Fibre optic interconnecting devices and passive components - Performance standard - Part 021-02: Single-mode fibre optic connectors terminated as pigtails and patchcords for category C - Controlled environment

SIST EN IEC 61753-021-02:2024

IEC 61753-021-02:2023 defines the minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category C (controlled environment), as defined in IEC 61753-1. If tests were performed on the connectors terminated as pigtails or patchcords for categories OP+HD, OP+, OP, OPHD, or CHD and the product passed, the product will be automatically qualified or categorized as meeting the IEC standard for category C. This first edition cancels and replaces the second edition of IEC 61753-021-2 published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-021-2:2007: a) changed scope to remove restrictions on attenuation and return loss grades; b) included provisions for rectangular ferrule connectors; c) changed the terms and definitions of the different types of test samples (pigtail test samples and patchcord test samples) used in the various tests to avoid confusion; d) updated fibre naming conventions according to IEC 60793-2-50 and added provisions for B-657 fibres; e) added all the attenuation and return loss grades defined in IEC 61753-1; f) test severities updated according to IEC 61753-1; g) reduced flexing of strain relief cycles from 100 cycles to 50 cycles; h) added the torsion test; i) reduced the duration of the fibre/cable retention test on reinforced cables from 120 s to 60 s minimum; j) removed the static side load test; k) reduced the number of mating durability cycles from 500 cycles to 200 cycles and added provisions for rectangular ferrule connectors; l) added Annex B for visual examination of the outer cable sheath movement of reinforced cables as an additional requirement for change of temperature, cable retention and flexing of the strain relief tests.

Standard
24 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61300-2-38:2023(Main)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure

SIST EN IEC 61300-2-38:2024

IEC 61300-2-38:2023 is available as IEC 61300-2-38:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61300-3-38:2023 presents two methods for testing the sealing performance of a fibre optic sealed closure and hardened connector using air pressure. This third edition cancels and replaces the second edition published in 2006. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of sealed hardened connectors; b) recommended test severities from IEC 61753-1; c) test configurations for hardened connectors and adaptors.

Standard
16 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 61300-2-26:2023(Main)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist

SIST EN IEC 61300-2-26:2023

IEC 61300-2-26: 2023 provides a test to determine the corrosion resistance of the metals used in the construction of fibre optic interconnecting devices and passive components. This document determines if dissimilar metals have been well finished to prevent corrosion. The requirements of the tests for these devices are defined in IEC 61753-1. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of Clause 3, Terms and definitions; b) harmonisation with IEC 61753-1:2018 and addition of Table 2; c) harmonisation with IEC 60068-2-11:2021

Standard
15 pages
English language
sale 10% off
e-Library read for
1 day