EN IEC 63339:2024
(Main)Unified reference model for smart manufacturing
Unified reference model for smart manufacturing
IEC 63339:2024 specifies the unified reference model for smart manufacturing (URMSM) using a terminology and structure, and establishes criteria for creating reference models, as specializations, that support smart manufacturing. The terminology and structure comprise a set of common modelling elements, their associations, and conformance criteria. These common modelling elements address aspects and perspectives of products and production and their lifecycle considerations. The URMSM enables an approach for creating multiple models based upon a reference model that is sufficient for understanding significant relationships among entities involved in smart manufacturing (SM) and for the development of standards and other specifications. The URMSM specifications in this document accommodate consistent, coherent, compatible specializations for relevant aspects of manufacturing systems consisting of equipment, products, and services within the domain of manufacturing. Provisions of this document are applicable for a new smart manufacturing reference model (SMRM) or elaboration of existing SMRM capabilities, for example, improving capabilities for analysis of opportunities and synthesis of technological advances, and improving interoperability of new and existing systems. This document is not intended to prescribe interoperability considerations or data schemas of models. Standardization of content relative to models will be the subject of other standards and texts specific to those model domains.
Einheitliches Referenzmodell für Smart Manufacturing
Modèle de référence unifié pour la fabrication intelligente
IEC 63339:2024 spécifie le modèle de référence unifié pour la fabrication intelligente (URMSM) à l’aide d’une terminologie et d’une structure données, et établit des critères pour la création de modèles de référence, en tant que spécialisations, qui prennent en charge la fabrication intelligente. La terminologie et la structure comprennent un ensemble d’éléments de modélisation communs, leurs associations et des critères de conformité. Ces éléments de modélisation communs traitent des aspects et des perspectives des produits et de la production, ainsi que des considérations relatives à leur cycle de vie. L’URMSM permet de créer de multiples modèles en partant d’un modèle de référence qui est suffisamment développé pour comprendre les relations significatives entre les entités impliquées dans la fabrication intelligente (SM) et pour développer des normes et d’autres spécifications. Les spécifications relatives à l’URMSM dans le présent document permettent des spécialisations cohérentes et compatibles pour les aspects pertinents des systèmes de fabrication composés d’équipements, de produits et de services dans le domaine de la fabrication. Les dispositions du présent document s’appliquent à la création d’un nouveau modèle de référence pour la fabrication intelligente (SMRM) ou à l’affinement des capacités d’un SMRM existant (par exemple, l’amélioration des capacités d’analyse des opportunités et de synthèse des avancées technologiques, et l’amélioration de l’interopérabilité des systèmes nouveaux et existants). Le présent document n’a pas pour but de prescrire des considérations d’interopérabilité ou des schémas de données de modèles. La normalisation du contenu relatif aux modèles fera l’objet d’autres normes et textes spécifiques à ces domaines de modèles.
Poenoten referenčni model za pametno proizvodnjo
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 63339:2023
01-januar-2023
Enoten referenčni model za pametno proizvodnjo
Unified reference model for smart manufacturing
Ta slovenski standard je istoveten z: prEN IEC 63339:2022
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
oSIST prEN IEC 63339:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 63339:2023
oSIST prEN IEC 63339:2023
65/946/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63339 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-11-18 2023-02-10
SUPERSEDES DOCUMENTS:
65/930/CD, 65/939A/CC
IEC TC 65 : INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION
SECRETARIAT: SECRETARY:
France Mr Didier GIARRATANO
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SyC SM,ISO/IEC JTC 1/SC 41
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Unified reference model for smart manufacturing
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 63339:2023
- 2 - IEC/ISO CDV 63339 © IEC 2022
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 UNIFIED REFERENCE MODEL FOR SMART
5 MANUFACTURING
8 FOREWORD
9 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
10 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
11 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
12 addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
13 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
14 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
15 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
16 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
17 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
18 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
19 consensus of opinion on the relevant subjects since each technical committee has representation from all
20 interested IEC National Committees.
21 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
22 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
23 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
24 misinterpretation by any end user.
25 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
26 transparently to the maximum extent possible in their national and regional publications. Any divergence between
27 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the lat ter.
28 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
29 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
30 services carried out by independent certification bodies.
31 6) All users should ensure that they have the latest edition of this publication.
32 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
33 members of its technical committees and IEC National Committees for any personal injury, property damage or
34 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
35 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
36 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
37 indispensable for the correct application of this publication.
38 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
39 rights. IEC shall not be held responsible for identifying any or all such patent rights.
40 IEC/ISO 63339 has been prepared committee by IEC technical committee 65: Industrial-process
41 measurement, control and automation and by ISO technical committee 184: Automation
42 systems and integration. It is an International Standard.
43 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
45 Full information on the voting for its approval can be found in the report on voting indicated in
46 the above table.
47 The language used for the development of this International Standard is English.
48 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
49 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
50 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
51 described in greater detail at www.iec.ch/standardsdev/publications.
oSIST prEN IEC 63339:2023
- 3 - IEC/ISO CDV 63339 © IEC 2022
52 The committees have decided that the contents of this document will remain unchanged until
53 the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related
54 to the specific document. At this date, the document will be
55 • reconfirmed,
56 • withdrawn,
57 • replaced by a revised edition, or
58 • amended.
oSIST prEN IEC 63339:2023
- 4 - IEC/ISO CDV 63339 © IEC 2022
63 Unified reference model for smart manufacturing
65 CONTENTS
67 FOREWORD . 2
68 Introduction . 8
69 1 Scope . 12
70 2 Normative references . 12
71 3 Terms, definitions, and conventions . 12
72 3.1 Terms and definitions . 12
73 3.2 Abbreviated terms and acronyms . 16
74 3.3 Conventions . 17
75 4 Conformance . 17
76 4.1 Intended usage . 17
77 4.2 Full conformance . 18
78 4.3 Partial conformance . 18
79 4.3.1 Conformance to purpose and context requirements . 18
80 4.3.2 Conformance to dimensions and coherence . 18
81 4.3.3 Conformance to semantic modelling of aspects . 18
82 4.3.4 Conformance to facets and frameworks . 18
83 5 The URMSM in smart manufacturing concepts . 18
84 6 Reference model concepts . 19
85 6.1 SM modelling . 19
86 6.2 Modelling purpose . 20
87 6.3 Modelling dimensions . 21
88 6.4 Dimension coherence . 21
89 6.5 Stakeholders . 22
90 6.6 Concerns . 22
91 6.7 Use Case . 23
92 6.8 Viewpoints and views . 24
93 6.9 Perspectives . 24
94 6.9.1 Use of perspective . 24
95 6.9.2 Stakeholder perspectives . 24
96 6.9.3 Analytical framework . 24
97 6.10 Aspects . 25
98 6.11 Life cycle modelling . 25
99 6.12 SM semantic modelling . 26
100 6.12.1 Semantic modelling overview . 26
101 6.12.2 Forms of semantic representation . 27
102 6.12.3 Granularity of semantic models . 28
103 7 Dimensions of URMSM . 29
oSIST prEN IEC 63339:2023
- 5 - IEC/ISO CDV 63339 © IEC 2022
104 7.1 Identifying aspect interactions and modelling dimensions of smart
105 manufacturing . 29
106 7.2 Specifying modelling dimensions . 29
107 7.2.1 Collections of aspects as dimensions of smart manufacturing . 29
108 7.2.2 Collections of dimensions as an analytical framework for smart
109 manufacturing . 30
110 7.2.3 Collections of life cycle phases as dimensions of smart manufacturing . 31
111 7.3 Using a semantic model for analytical reasoning in smart manufacturing . 32
112 7.4 Identifying meaningful dimension interactions . 32
113 7.5 Selecting facet dimensions based upon concerns . 32
114 7.6 Frameworks as visualizations of interactions . 34
115 8 Using the URMSM . 37
116 8.1 Utility of a reference model for smart manufacturing . 37
117 8.2 Industry specific application of the URMSM. 38
118 8.3 Specializing URMSM . 38
119 8.3.1 Specific utilization of the URMSM and rules for derivatives of SMRMs . 38
120 8.3.2 Manipulating reference models to match purpose . 39
121 9 Use cases of the URMSM . 40
122 9.1 Analysis use case . 40
123 9.1.1 Examining interactions at intersections of aspects . 40
124 9.1.2 Examining interactions near intersections of aspects . 41
125 9.1.3 Inserting new capabilities to analyse . 41
126 9.2 Synthesis use case . 41
127 9.2.1 Identifying necessary coverage of aspect interactions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.