EN 50411-6-1:2011

Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1: Unprotected microduct for category S and A

Product definition This specification contains the initial, start of life dimensional, mechanical and environmental performance requirements which an unprotected microduct must meet. It does not address the installation capability of these products which must be agreed between the user and supplier. Operating environment The tests selected combined with the severities and duration are representative of an outside plant for subterranean and/or aerial environment defined by: — ETS 300 019 : class 8.1: underground locations (without earthquake requirement) — EN 61753-1 : category S: subterranean environment, category A: aerial environment Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. Allowed product types This standard covers all European Standard on optical fibre unprotected microducts. This includes, but is not limited to, EN 60794-5, Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing. Allowed microduct connector types This microduct standard allows the use of all European Standard on microduct connectors, including: straight, reducer/enlarger stem, reducer/enlarger, close down, liquid block, liquid block with barb end, and end stop connectors. This includes EN 50411-2-8, Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1.

LWL-Spleißkassetten und -Muffen für die Anwendung in LWL-Kommunikationssystemen - Produktnormen - Teil 6-1: Ungeschützte Mikrorohre für die Kategorien S und A

Organiseurs et boîtiers de fibres destinés à être utilisés dans les systèmes de communication par fibres optiques - Spécifications de produit - Partie 6-1: Micro-conduits non protégés pour les catégories S et A

Delilniki za optična vlakna in kabelske spojnice za optične komunikacijske sisteme - Specifikacije izdelka - 6-1. del: Nezaščiteni mikrokanal kategorij S in A

Ta specifikacija vsebuje začetne zahteve za dimenzije, mehanske zahteve in zahteve za okoljsko učinkovitost, ki jim mora ustrezati nezaščiten mikrokanal. Ne obravnava zmogljivosti za vgradnjo teh izdelkov; o tem se morata dogovoriti uporabnik in dobavitelj.
Delovno okolje
Izbrani preskusi v kombinaciji s strogostjo in trajanjem predstavljajo zunanji obrat za podzemno in/ali zračno okolje, opredeljeno z. - ETS 300 019 : razred 8.1 podzemne lokacije (brez potresnih zahtev)- EN 61753-1 : kategorija S: podzemno okolje, kategorija A: zračno okolje
Kakovost.

General Information

• Status: Withdrawn
• Publication Date: 16-Jun-2011
• Withdrawal Date: 20-Mar-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Mar-2023
• Completion Date: 14-Mar-2023
• Ref Project: SIST EN 50411-6-1:2011 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1: Unprotected microduct for category S and A

Relations

• Replaced By: EN 50411-6-1:2022 - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 6-1: Unprotected microduct for category S and A
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50411-6-1:2011
01-september-2011
'HOLOQLNL]DRSWLþQDYODNQDLQNDEHOVNHVSRMQLFH]DRSWLþQHNRPXQLNDFLMVNHVLVWHPH
6SHFLILNDFLMHL]GHONDGHO1H]DãþLWHQLPLNURNDQDONDWHJRULM6LQ$
Fibre organisers and closures to be used in optical fibre communication systems -
Product specifications - Part 6-1: Unprotected microduct for category S and A
LWL-Spleißkassetten und -Muffen für die Anwendung in LWL-Kommunikationssystemen
- Produktnormen - Teil 6-1: Ungeschützte Mikrorohre für die Kategorien S und A
Ta slovenski standard je istoveten z: EN 50411-6-1:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 50411-6-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50411-6-1:2011

---------------------- Page: 2 ----------------------

SIST EN 50411-6-1:2011

EUROPEAN STANDARD
EN 50411-6-1

NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre organisers and closures to be used in optical fibre communication
systems -
Product specifications -
Part 6-1: Unprotected microduct for category S and A



 LWL-Spleißkassetten und -Muffen für die
Anwendung in LWL-
Kommunikationssystemen -
Produktnormen -
Teil 6-1: Ungeschützte Mikrorohre für die
Kategorien S und A





This European Standard was approved by CENELEC on 2011-03-21. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50411-6-1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 50411-6-1:2011
EN 50411-6-1:2011 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic
interconnects, passive and connectorised components.

The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as EN 50411-6-1 on 2011-03-21.

The following dates were fixed:


– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2012-03-21
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2014-03-21
with the EN have to be withdrawn
__________

---------------------- Page: 4 ----------------------

SIST EN 50411-6-1:2011
- 3 - EN 50411-6-1:2011
Contents
Page

1 Scope . - 4 -
2 Normative references . - 4 -
3 Terms, definitions and abbreviations . - 5 -
3.1 Terms and definitions . - 5 -
3.2 Abbreviations . - 5 -
4 Description . - 6 -
4.1Unprotected microduct . - 6 -
4.2DŝĐƌŽĚƵĐƚ functions. - 6 -
5 Dime
...