Optical fibre cables - Part 1-301: Generic specification - Basic optical cable test procedures - Cable elements test methods - Bend test, method G1

IEC 60794-301:2023 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property – bending. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This document partially cancels and replaces IEC 60794-1-23:2019. This edition includes the following significant technical changes with respect to IEC 60794-1-23:2019: a) reference test method IEC 60793-1-40 removed regarding the apparatus; b) information added regarding the temperature to be specified in the detail specification; c) new subclause added containing the details to be reported.

Lichtwellenleiterkabel - Teil 1-301: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Biegeprüfung, Verfahren G1

Câbles à fibres optiques - Partie 1-301: Spécification générique - Procédures fondamentales d'essai des câbles optiques - Méthodes d'essai des éléments de câbles - Essai de courbure, méthode G1

IEC 60794-301:2023 décrit les procédures d’essai à utiliser afin d'établir des exigences uniformes applicables aux caractéristiques mécaniques des éléments de câbles à fibres optiques: courbure. Le présent document s’applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d'une part et de conducteurs électriques d'autre part. Dans tout le document, l'expression "câble optique" peut également inclure des assemblages de fibres optiques, des assemblages de fibres pour microconduits, etc. Ce document annule et remplace partiellement l’IEC 60794-1-23:2019. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 60794‑1‑23:2019: a) suppression de la méthode d’essai référence IEC 60793-1-40 pour ce qui concerne l’appareillage; b) ajout d'informations concernant la température à spécifier dans la spécification particulière; c) ajout d'un nouveau paragraphe contenant les informations détaillées à consigner.

Optični kabli - 1-301. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Upogibni preskus, metoda G1 (IEC 60794-1-301:2023)

Standard IEC 60794-301:2023 opisuje preskusne postopke, ki jih je treba uporabiti pri določanju enotnih zahtev glede elementov optičnih kablov za mehansko lastnost – upogibanje. Ta dokument se uporablja za optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov. V tem dokumentu lahko izraz »optični kabel« vključuje tudi optične enote, mikrokanale itd. Ta dokument delno razveljavlja in nadomešča standard IEC 60794-1-23:2019. Ta izdaja vključuje naslednje pomembne tehnične spremembe glede na standard IEC 60794-1-23:2019:
a) V zvezi z napravo je odstranjena referenčna preskusna metoda iz standarda IEC 60793-1-40.
b) Dodane so informacije glede temperature, ki jo je treba določiti v podrobni specifikaciji.
c) Dodana je podtočka s podrobnostmi, o katerih je treba poročati.

General Information

Status
Published
Publication Date
11-May-2023
Current Stage
6060 - Document made available - Publishing
Start Date
12-May-2023
Completion Date
12-May-2023

Relations

Buy Standard

Standard
EN IEC 60794-1-301:2023
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60794-1-301:2022
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60794-1-301:2023
01-julij-2023
Optični kabli - 1-301. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Upogibni preskus,
metoda G1 (IEC 60794-1-301:2023)
Optical fibre cables - Part 1-301: Generic specification - Basic optical cable test
procedures - Cable elements test methods - Bend test, Method G1 (IEC 60794-1-
301:2023)
Lichtwellenleiterkabel - Teil 1-301: Fachgrundspezifikation - Grundlegende
Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente -
Biegeprüfung, Verfahren G1 (IEC 60794-1-301:2023)
Câbles à fibres optiques - Partie 1-301: Spécification générique - Procédures
fondamentales d'essai des câbles optiques - Méthodes d'essai des éléments de câbles -
Essai de courbure, méthode G1 (IEC 60794-1-301:2023)
Ta slovenski standard je istoveten z: EN IEC 60794-1-301:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-301:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-301:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-301:2023


EUROPEAN STANDARD EN IEC 60794-1-301

NORME EUROPÉENNE

EUROPÄISCHE NORM May 2023
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-301: Generic specification - Basic
optical cable test procedures - Cable elements test methods -
Bend test, method G1
(IEC 60794-1-301:2023)
Câbles à fibres optiques - Partie 1-301: Spécification Lichtwellenleiterkabel - Teil 1-301: Fachgrundspezifikation -
générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essai des éléments de câbles - Essai Prüfverfahren für Kabelelemente - Biegeprüfung, Verfahren
de courbure, méthode G1 G1
(IEC 60794-1-301:2023) (IEC 60794-1-301:2023)
This European Standard was approved by CENELEC on 2023-05-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60794-1-301:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-301:2023
EN IEC 60794-1-301:2023 (E)
European foreword
The text of document 86A/2298/FDIS, future edition 1 of IEC 60794-1-301, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-301:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-10
document have to be withdrawn

This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-301:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the fo
...

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-301:2022
01-maj-2022
Optični kabli - 1-301. del: Splošne specifikacije - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Upogibni preskus,
metoda G1
Optical fibre cables - Part 1-301: Generic specification - Basic optical cable test
procedures - Cable elements test methods - Bend test, Method G1
Ta slovenski standard je istoveten z: prEN IEC 60794-1-301:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-301:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-301:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-301:2022
86A/2180/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-301 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-02-25 2022-05-20
SUPERSEDES DOCUMENTS:
86A/2101/CD, 86A/2175/CC

IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Optical fibre cables - Part 1-301: Generic specification - Basic optical cable test procedures -
Cable elements test methods - Bend test, Method G1

PROPOSED STABILITY DATE: 2025

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-301:2022
IEC CDV 60794-1-301/Ed1 © IEC:2022 – 2 – 86A/2180/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 6
8 4 General requirements . 6
9 5 Method G1: Bend test for optical cable elements . 6
10 5.1 Object . 6
11 5.2 Sample . 7
12 5.3 Apparatus . 7
13 5.4 Procedure . 7
14 5.5 Requirements . 7
15 5.6 Details to be specified . 7
16 5.7 Details to be reported . 7
17 Bibliography . 8
18
19
20

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60794-1-301:2022
IEC CDV 60794-1-301/Ed1 © IEC:2022 – 3 – 86A/2180/CDV
21 INTERNATIONAL ELECTROTECHNICAL COMMISSION
22
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.