EN 61753-087-2:2011

Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment

IEC 61753-087-2:2010 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed 1 310 nm upstream and 1 490 nm downstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device must satisfy in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1:2007.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 087-2: Nicht mit Steckverbindern versehene bidirektionale 1 310-nm-upstream-1 490-nm-downstream-Einmoden-WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 087-2: Dispositifs WWDM unimodaux non connectorisés bidirectionnels 1 310 nm en voie montante et 1 490 nm en voie descendante et pour la catégorie C - Environnement contrôlé

La CEI 61753-087-2:2010 contient les sévérités et les exigences minimales initiales de performances, d'essais et de mesure auxquelles un dispositif de réseau optique passif (PON) à répartition en longueur d'onde large (WWDM) 1 310 nm en voie montante et 1 490 en voie descendante et muni de fibres amorces doit répondre afin d'être classé comme conforme aux exigences de la catégorie C (environnements contrôlés), comme défini dans l'Annexe A de la CEI 61753-1:2007.

Tehnični standard za optične spojne elemente in pasivne komponente - 087-2. del: Naprave brez konektorjev za širokopasovni valovni multipleks (WWDM) za enorodni dvosmerni 1310 nm navzgornji in 1490 nm navzdolnji prenos za kategorijo C - Nadzorovano okolje (IEC 61753-087-2:2010)

Ta del IEC 61753 vsebuje minimalne zahteve glede začetnega delovanja, preskušanja in merjenja ter strogosti, ki jih mora izpolnjevati naprava pasivnega optičnega omrežja (PON) z optičnimi vlakni v svitku 1310 nm za navzgornji in 1490 nm za navzdolnji prenos multipleksne delitve širokih valovnih dolžin (WWDM), da ustreza zahtevam kategorije O (nadzorovana okolja), kot so določene v dodatku A IEC 61753-1:2007.
Dodatek B tega standarda podaja informacije v zvezi z delovanjem WWDM s 1310 nm za navzgornji in 1490 nm za navzdolnji prenos.

General Information

• Status: Published
• Publication Date: 24-Mar-2011
• Withdrawal Date: 12-Jan-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Mar-2011
• Due Date: 25-Mar-2011
• Completion Date: 25-Mar-2011
• Ref Project: SIST EN 61753-087-2:2011 - Fibre optic interconnecting devices and passive components performance standard - Part 087-2: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment (IEC 61753-087-2:2010)

Relations

• Corrected By: EN 61753-087-2:2011/AC:2011 - Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2011
7HKQLþQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO
1DSUDYHEUH]NRQHNWRUMHY]DãLURNRSDVRYQLYDORYQLPXOWLSOHNV::'0]D
HQRURGQLGYRVPHUQLQPQDY]JRUQMLLQQPQDY]GROQMLSUHQRV]D
NDWHJRULMR&1DG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 087-2: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490
nm downstream WWDM devices for category C - Controlled environment (IEC 61753-
087-2:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
087-2: Nicht mir Steckern versehene bidirektionale 1310-nm-downstream-1490-nm-
upstream-Einmoden-WWDM-Bauteile für die Kategorie C - Kontrollierte Umgebung (IEC
61753-087-2:2010)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 087-2: Dispositifs WWDM unimodaux non connectorisés
bidirectionnels 1 310 nm en voie montante et 1 490 nm en voie descendante et pour la
catégorie C - Environnement contrôlé (CEI 61753-087-2:2010)
Ta slovenski standard je istoveten z: EN 61753-087-2:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-087-2
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 087-2: Non-connectorized single-mode bidirectional 1310 nm
upstream and 1490 nm downstream WWDM devices for category C -
Controlled environment
(IEC 61753-087-2:2010)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 087-2: Dispositifs WWDM Betriebsverhalten -
unimodaux non connectorisés Teil 087-2: Nicht mit Steckverbindern
bidirectionnels 1 310 nm en voie montante versehene bidirektionale 1 310-nm-
et 1 490 nm en voie descendante et pour upstream-1 490-nm-downstream-
la catégorie C - Einmoden-WWDM-Bauteile für die
Environnement contrôlé Kategorie C -
(CEI 61753-087-2:2010) Kontrollierte Umgebung
(IEC 61753-087-2:2010)
This European Standard was approved by CENELEC on 2011-01-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-087-2:2011 E

Foreword
The text of document 86B/3095/FDIS, future edition 1 of IEC 61753-087-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-087-2 on 2011-01-13.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-10-13
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-01-13
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-087-2:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-2-48 NOTE  Harmonized as EN 61300-2-48.
IEC 62074-1 NOTE  Harmonized as EN 62074-1.
__________
- 3 - EN 61753-087-2:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization

IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

Publication Year Title EN/HD Year

IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and measurements -
Directivity of fibre optic branching devices

IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 61753-087-2 ®
Edition 1.0 2010-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm upstream and
1 490 nm downstream WWDM devices for category C – Controlled environment

Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 087-2: Dispositifs WWDM unimodaux non connectorisés bidirectionnels
1 310 nm en voie montante et 1 490 nm en voie descendante et pour
la catégorie C – Environnement contrôlé

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 33.180.20 ISBN 978-2-88912-300-1
– 2 – 61753-087-2 Ó IEC:2010
CONTENTS
FOREW ORD . 3
1 Sc o pe . 5
2 Normative references . 5
3 Test . 6
4 Test report . 6
5 Performance requirements. 6
5.1 Reference components . 6
5.2 Dimensions . 7
5.3 Sample size . 7
5.4 Test details and requirements . 7
Annex A (normative) Sample size . 11
Annex B (informative) General information for 1310 nm upstream and 1490 nm
downstream PON WWDM device . 12
Bibliography . 13

Figure B.1 – Example for 1 490 nm downstream and 1 310 nm upstream WWDM at
central office and customer side . 12

Table 1 – Test details and requirements . 7
Table A.1 – Sample size . 11

61753-087-2 Ó IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm
upstream and 1 490 nm downstream WWDM devices for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional pub
...