EN 62005-4:1999

Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening

Describes product screening. A proper product screen is actually a process, not a test. As a process, it is maintained and constantly validated to ensure it achieves the purpose for which it was defined. This process is applied to a product in order to induce products with a known failure mechanism, to fail in a controlled situation before the product is deployed in the field. If this process is properly applied, then all infant mortality failures in the field, associated with the failure mechanism(s) for the screen, will be eliminated.

Betriebszuverlässigkeit von Lichtwellenleitern - Verbindungselemente und passive Bauteile - Teil 4: Produktsortierprüfung

Fiabilité des dispositifs d'interconnexion et des composants optiques passifs à fibres optiques - Partie 4: Sélection des produits

Spécifie une méthode pour la sélection des produits. Cette sélection des produits correcte est en fait un processus et non pas un essai. A ce titre, il convient qu'il soit entretenu et constamment validé, afin de s'assurer qu'il atteint l'objectif pour lequel il a été défini. Cette norme est applicable à un produit afin de conduire des produits ayant un mécanisme de défaillance connu, à avoir une défaillance dans le cadre d'une situation contrôlée, avant que le produit ne soit déployé sur le terrain. S'il est correctement appliqué, toutes les défaillances de moralité initiale sur le terrain, associées aux mécanismes de défaillance pour le tri, seront éliminées.

Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening (IEC 62005-4:1999)

General Information

• Status: Published
• Publication Date: 08-Nov-1999
• Withdrawal Date: 30-Sep-2002
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-Nov-1999
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN 62005-4:2001 - Reliability of fibre optic interconnecting devices and passive optical components -- Part 4: Product screening

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening (IEC 62005-4:1999)Betriebszuverlässigkeit von Lichtwellenleitern - Verbindungselemente und passive Bauteile -- Teil 4: ProduktsortierprüfungFiabilité des dispositifs d'interconnexion et des composants optiques passifs à fibres optiques -- Partie 4: Sélection des produitsReliability of fibre optic interconnecting devices and passive optical components -- Part 4: Product screening33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 62005-4:1999SIST EN 62005-4:2001en01-februar-2001SIST EN 62005-4:2001SLOVENSKI
STANDARD
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62005-4:1999 E EUROPEAN STANDARD
EN 62005-4 NORME EUROPÉENNE EUROPÄISCHE NORM
November 1999
ICS 33.180.20
English version
Reliability of fibre optic interconnecting devices and
passive optical components Part 4: Product screening (IEC 62005-4:1999)
Fiabilité des dispositifs d'interconnexion et des composants optiques passifs à fibres optiques Partie 4: Sélection des produits (CEI 62005-4:1999) Betriebszuverlässigkeit von Lichtwellenleitern
Verbindungselemente und
passive Bauteile Teil 4: Produktsortierprüfung (IEC 62005-4:1999)
This European Standard was approved by CENELEC on 1999-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

E Page 2 EN 62005-4:1999
Foreword
The text of document 86B/1212/FDIS, future edition 1 of IEC 62005-4, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62005-4 on 1999-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2000-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2002-10-01
__________
Endorsement notice
The text of the International Standard IEC 62005-4:1999 was approved by CENELEC as a European Standard without any modification.
__________
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD62005-4Première éditionFirst edition1999-08Fiabilité des dispositifs d'interconnexion et descomposants optiques passifs à fibres optiques –Partie 4:Sélection des produitsReliability of fibre optic interconnecting devicesand passive optical components –Part 4:Product screening Commission Electrotechnique Internationale International Electrotechnical CommissionPour prix, voir catalogue en vigueurFor price, see current catalogueÓ IEC 1999
Droits de reproduction réservés
¾
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photo-copie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without permission inwriting from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: [phone]e-mail: [e-mail] IEC web site
http://www.iec.chCODE PRIXPRICE CODEE

62005-4 ã IEC:1999– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION___________RELIABILITY OF FIBRE OPTIC INTERCONNECTING DEVICES ANDPASSIVE OPTICAL COMPONENTS –Part 4: Product screeningFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical reports or guides and they are accepted by the National Committees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 62005-4 has been prepared by subcommittee 86B: Fibre opticinterconnecting devices and passive components, of IEC technical committee 86: Fibre optics.The text of this standard is based on the following documents:FDISReport on voting86B/1212/FDIS86B/1249/RVDFull information on the votin
...