EN 60793-2-30:2009

Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres

Applies to optical fibre types A3a, A3b, A3c and A3d. It covers requirements common to A3 multimode fibres. It also covers particular requirements for individual fibre types and specific applications. The main changes from the previous edition are: the addition of tensile strength requirement; the removal of water immersion requirement; and the addition of environmental requirements.

Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A3

Fibres optiques - Partie 2-30: Spécifications de produit - Spécification intermédiaire pour les fibres multimodales de catégorie A3

S'applique aux fibres optiques de type A3a, A3b, A3c et A3d. Elle couvre des prescriptions communes aux fibres multimodales de catégorie A3. Elle couvre aussi des prescriptions particulières applicables à des types particuliers de fibres et à des applications données. Les principaux changements par rapport à l'édition précédente sont: adjonction d'exigences concernant la contrainte à la traction; suppression des exigences concernant l'immersion dans l'eau; et adjonction d'exigences d'environnement.

Optična vlakna - 2-30. del: Specifikacije izdelka - Področna specifikacija za večrodna vlakna kategorije A3 (IEC 60793-2-30:2007)

General Information

• Status: Withdrawn
• Publication Date: 14-Apr-2009
• Withdrawal Date: 31-Mar-2012
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Parallel Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Nov-2015
• Completion Date: 29-Nov-2015
• Ref Project: SIST EN 60793-2-30:2009 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2007)

Relations

• Replaces: EN 60793-2-30:2002 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
• Effective Date: 29-Jan-2023
• Replaced By: EN 60793-2-30:2013 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A3
(IEC 60793-2-30:2007)Fibres optiques - Partie 2-30: Spécifications de produit - Spécification intermédiaire pour les fibres multimodales de catégorie A3
(CEI 60793-2-30:2007)Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2007)33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60793-2-30:2009SIST EN 60793-2-30:2009en,fr01-junij-2009SIST EN 60793-2-30:2009SLOVENSKI
STANDARDSIST EN 60793-2-30:20041DGRPHãþD



SIST EN 60793-2-30:2009



EUROPEAN STANDARD EN 60793-2-30 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-2-30:2009 E
ICS 33.180.10 Supersedes EN 60793-2-30:2002
English version
Optical fibres -
Part 2-30: Product specifications -
Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2007)
Fibres optiques -
Partie 2-30: Spécifications de produit -
Spécification intermédiaire
pour les fibres multimodales
de catégorie A3 (CEI 60793-2-30:2007)
Lichtwellenleiter -
Teil 2-30: Produktspezifikationen -
Rahmenspezifikation
für Mehrmodenfasern
der Kategorie A3 (IEC 60793-2-30:2007)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60793-2-30:2009



EN 60793-2-30:2009 – 2 – Foreword The text of document 86A/1130/CDV, future edition 2 of IEC 60793-2-30, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC Parallel Unique Acceptance Procedure and was approved by CENELEC as EN 60793-2-30 on 2009-04-01. This European Standard supersedes EN 60793-2-30:2002. The main changes from EN 60793-2-30:2002 are: – the addition of tensile strength requirement; – the removal of water immersion requirement; – the addition of environmental requirements. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-04-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60793-2-30:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60793-1-1 NOTE
Harmonized as EN 60793-1-1:2008 (not modified). __________ SIST EN 60793-2-30:2009



– 3 – EN 60793-2-30:2009
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793-1-20 - 1) Optical fibres -
Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 2002 2)
IEC 60793-1-21 - 1) Optical fibres -
Part 1-21: Measurement methods and test procedures - Coating geometry EN 60793-1-21 2002 2)
IEC 60793-1-22 - 1) Optical fibres -
Part 1-22: Measurement methods and test procedures - Length measurement EN 60793-1-22 2002 2)
IEC 60793-1-30 - 1
...