Electrical relays - Tests and measurements - Part 3: Relay coil properties

Elektrische Relais - Mess- und Prüfverfahren - Teil 3: Eigenschaften von Relaisspulen

Relais électriques - Essais et mesurages - Partie 3: Caractéristiques de la bobine du relais

Električni releji - Preskusi in meritve - 3. del: Lastnosti tuljave releja

General Information

Status
Not Published
Publication Date
31-Aug-2026
Current Stage
4020 - Enquiry circulated - Enquiry
Start Date
28-Feb-2025
Due Date
28-Feb-2025
Completion Date
28-Feb-2025

Buy Standard

Draft
prEN IEC 63522-3:2025
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2025
Električni releji - Preskusi in meritve - 3. del: Lastnosti tuljave releja
Electrical relays - Tests and measurements - Part 3: Relay coil properties
Elektrische Relais – Mess- und Prüfverfahren – Teil 3: Eigenschaften von Relaisspulen
Relais électriques - Essais et mesurages - Partie 3: Caractéristiques de la bobine du
relais
Ta slovenski standard je istoveten z: prEN IEC 63522-3:2025
ICS:
29.120.70 Releji Relays
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

94/1106/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63522-3 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-02-28 2025-04-25
SUPERSEDES DOCUMENTS:
94/1023/CDV, 94/1104/RVC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrical relays - Tests and Measurements - Part 3: Relay coil properties

PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

94/1106/CDV - 2 - IEC CDV 63522-3 ED1 © IEC 2025

1 CONTENTS
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 3.1 Back-EMF . 5
8 4 Test procedure . 5
9 4.1 General . 5
10 4.2 Coil resistance . 5
11 4.2.1 Purpose . 5
12 4.2.2 Procedure . 5
13 4.2.3 Conditions to be specified . 6
14 4.3 Coil impedance . 7
15 4.3.1 Purpose . 7
16 4.3.2 Procedure . 7
17 4.3.3 Conditions to be specified . 7
18 4.4 Coil inductance . 8
19 4.4.1 Purpose . 8
20 4.4.2 Procedure . 8
21 4.4.3 Conditions to be specified . 8
22 4.5 Coil power consumption . 8
23 4.5.1 Purpose . 8
24 4.5.2 Procedure . 8
25 4.5.3 Conditions to be specified . 9
26 4.6 Coil transient suppression test . 9
27 4.6.1 Purpose . 9
28 4.6.2 Procedure . 9
29 4.6.3 Conditions to be specified . 11
30 5 Evaluation . 11
31 5.1 General . 11
32 5.2 Test report . 11
33 Bibliography . 13
35 Figure 1 - Example four-wire resistance measurement . 6
36 Figure 2 - Example presence of diodes in the coil circuit . 7
37 Figure 3 – Example circuit for the measurement of coil transient suppression . 10
38 Figure 4 – Example traces on an oscilloscope screen during transient voltage
39 measurement . 11
41 No table of figures entries found.
IEC CDV 63522-3 ED1 © IEC 2025 - 3 - 94/1106/CDV

43 INTERNATIONAL ELECTROTECHNICAL COMMISSION
44 ____________
46 Electrical relays – Tests and Measurements –
48 Part 3: Relay coil properties
50 FOREWORD
51 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
52 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
53 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
54 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
55 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
56 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
57 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
58 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
59 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
60 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
61 consensus of opinion on the relevant subjects since each technical committee has representation from all
62 interested IEC National Committees.
63 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
64 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
65 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
66 misinterpretation by any end user.
67 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
68 transparently to the maximum extent possible in their national and regional publications. Any divergence between
69 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
70 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
71 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
72 services carried out by independent certification bodies.
73 6) All users should ensure that they have the latest edition of this publication.
74 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
75 members of its technical committees and IEC National Committees for any personal injury, property damage or
76 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
77 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
78 Publications.
79 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
80 indispensable for the correct application of this publication.
81 9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
82 patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
83 respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
84 may be required to implement this document. However, implementers are cautioned that this may not represent
85 the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
86 shall not be held responsible for identifying any or all such patent rights.
87 IEC 63522-3 has been prepared by IEC technical committee 94: Electrical relays. It is an
88 International Standard.
90 The text of this International Standard is based on the following documents:
CDV Report on voting
94/1023/CDV 94/1104/RVC
92 Full information on the voting for the approval of this International Standard can be found in the
93 report on voting indicated in the above table.
94 The language used for the development of this International Standard is English.

94/1106/CDV - 4 - IEC CDV 63522-3 ED1 © IEC 2025

95 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
96 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
97 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
98 described in greater detail at www.iec.ch/publications.
99 A list of all parts of IEC 63522 series, published under the general title Electrical relays – Relay
100 coil properties, can be found on the IEC website.
101 The committee has decided that the contents of this document will remain unchanged until the
102 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
103 specific document. At this date, the document will be
104 • reconfirmed,
105 • withdrawn, or
106 • revised.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
IEC CDV 63522-3 ED1 © IEC 2025 - 5 - 94/1106/CDV

109 Electrical relays – Tests and Measurements –
111 Part 3: Relay coil properties
114 1 Scope
115 This document is used for testing along with the appropriate severities and conditions for measurements
116 and tests designed to assess the ability of DUT to perform under expected conditions of transportation,
117 storage and all aspects of operational use.
118 The objective of this test is to ensure that the properties of the relay coil(s) are within the
119 specified limits.
120 2 Normative references
121 The following documents are referred to in the text in such a way that some or all of their content
122 constitutes requirements of this document. For dated references, only the edition cited applies.
123 For undated references, the latest edition of the referenced document (including any
124 amendments) applies.
125 IEC 63522-0: 20XX, Electrical relays – Tests and Measurements – Part 0: – General and
126 GuidanceTerms and definitions
127 3 Terms and definitions
128 For the purposes of this document, the terms and definitions given in clause 3 of IEC 63522 -0
129 and the following apply.
130 ISO and IEC maintain terminological databases for use in standardization at the following
131 addresses:
132 • IEC Electropedia: available at http://www.electropedia.org/
133 • ISO Online browsing platform: available at http://www.iso.org/obp
134 3.1 Back-EMF
135 abbreviation of back electromotive force in this document
136 4 Test procedure
137 4.1 General
138 It
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.