EN 61883-1:2009

Consumer audio/video equipment - Digital interface - Part 1: General

It specifies the packet format and the transmission timing for HD-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for 1125-60 and 1250-50 television systems, and the transmission timing. The significant technical changes with respect to the second edition are as follows: - Allocation of a new FMT code for the 1394 Trade Association specification '601 over 1394'; - Clarification of the meaning of FMT code; - Harmonization of IEC 61883-1 with IEEE 1394.1 for speeds over S400.

Audio/Video-Geräte der Unterhaltungselektronik - Digitale Schnittstelle - Teil 1: Allgemeines

Matériel audio/vidéo grand public - Interface numérique - Partie 1: Généralités

La CEI 61883-1:2008 spécifie une interface numérique pour matériel électronique audio/vidéo grand public, en utilisant la norme IEEE 1394. Elle décrit la structure générale en paquets, la gestion du flux de données et la gestion de la connexion de données audio-visuelles; elle décrit également les règles générales de transmission des commandes de contrôle. Elle définit un protocole de transmission de données audio-visuelles et une commande de contrôle assurant l'interconnexion du matériel numérique audio et vidéo, en appliquant la norme IEEE 1394. Cette troisième édition de la CEI 61883-1 annule et remplace la deuxième édition parue en 2003. Elle constitue une révision technique. Les modifications techniques significatives par rapport à la deuxième édition sont: - attribution d'un nouveau code FMT (Identification du format, en anglais " Format ID ") à l'Association commerciale 1394 " 601 sur 1394 "; - Clarification de la signification du code FMT; - harmonisation de la CEI 61883-1 avec l'IEEE 1394.1 pour les vitesses supérieures à S400. La présente version bilingue (2012-08) correspond à la version anglaise monolingue publiée en 2008-02.

Porabniška avdio/video oprema - Digitalni vmesnik - 1. del: Splošno (IEC 61883-1:2008)

General Information

• Status: Published
• Publication Date: 12-Aug-2009
• Withdrawal Date: 30-Jun-2012
• ICS: 33.160.01 - Audio, video and audiovisual systems in general
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Parallel Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 13-Aug-2009
• Completion Date: 13-Aug-2009
• Ref Project: SIST EN 61883-1:2009 - Consumer audio/video equipment - Digital interface - Part 1: General (IEC 61883-1:2008)

Relations

• Replaces: EN 61883-1:2003 - Consumer audio/video equipment - Digital interface - Part 1: General
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2009
1DGRPHãþD
SIST EN 61883-1:2003
Porabniška avdio/video oprema - Digitalni vmesnik - 1. del: Splošno (IEC 61883-
1:2008)
Consumer audio/video equipment - Digital interface - Part 1: General (IEC 61883-
1:2008)
Audio/Video-Geräte der Unterhaltungselektronik - Digitale Schnittstelle - Teil 1:
Allgemeines (IEC 61883-1:2008)
Matériel audio/vidéo grand public - Interface numérique - Partie 1: Généralités (CEI
61883-1:2008)
Ta slovenski standard je istoveten z: EN 61883-1:2009
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61883-1
NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM
ICS 33.160.01; 35.200 Supersedes EN 61883-1:2003

English version
Consumer audio/video equipment -
Digital interface -
Part 1: General
(IEC 61883-1:2008)
Matériel audio/vidéo grand public -  Audio/Video-Geräte der
Interface numérique - Unterhaltungselektronik -
Partie 1: Généralités Digitale Schnittstelle -
(CEI 61883-1:2008) Teil 1: Allgemeines
(IEC 61883-1:2008)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61883-1:2009 E
Foreword
The text of document 100/1236/CDV, future edition 3 of IEC 61883-1, prepared by technical area 4,
Digital system interfaces and protocols, of IEC TC 100, Audio, video and multimedia systems and
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61883-1 on 2009-07-01.
This European Standard supersedes EN 61883-1:2003.
The significant technical changes with respect to EN 61883-1:2003 are as follows:
– allocation of a new FMT code for the 1394 Trade Association specification ‘601 over 1394’;
– clarification of the meaning of FMT code;
– harmonization of EN 61883-1 with IEEE 1394.1 for speeds over S400.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61883-1:2008 was approved by CENELEC as a European
Standard without any modification.
__________
– 3 – EN 61883-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEEE 212 2001 Standard for a Control and Status Registers - -
(CSR) -
Architecture for microcomputer buses

IEEE 1394 1995 Standard for a High Performance Serial Bus - -

IEEE 1394a 2000 Standard for a High Performance Serial Bus - - -
Amendment 1
IEC 61883-1
Edition 3.0 2008-02
INTERNATIONAL
STANDARD
Consumer audio/video equipment – Digital interface –
Part 1: General
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 33.160.01; 35.200 ISBN 2-8318-9610-X

– 2 – 61883-1 © IEC:2008(E)
CONTENTS
FOREWORD.5

1 Scope and object.7
2 Normative references .7
3 Abbreviations .7
4 High-performance serial bus layers .8
4.1 Cable physical layer .8
4.2 Link layer .8
4.3 Transaction layer.8
5 Minimum node capabilities .8
5.1 Serial bus management.8
5.2 Command and status registers .8
5.2.1 CSR core registers .8
5.2.2 Serial bus node registers .9
5.2.3 Configuration ROM requirements.9
6 Real time data transmission protocol .12
6.1 Common isochronous packet (CIP) format.12
6.1.1 Isochronous packet structure.12
6.1.2 Packet header structure.12
6.1.3 CIP header structure .13
6.2 Transmission of fixed length source packet .13
6.2.1 Two-quadlet CIP header (form_0=0, form_1=0) .14
6.2.2 Isochronous packet transmission.17
7 Isochronous data flow management.17
7.1 General .17
7.2 Plugs and plug control registers .18
7.3 Connections .19
7.4 Plug states .20
7.5 OUTPUT_MASTER_PLUG register definition .22
7.6 INPUT_MASTER_PLUG register definition .23
7.7 OUTPUT_PLUG_CONTROL register definition .23
7.8 INPUT_PLUG_CONTROL register definition.25
7.9 Plug control register modification rules .26
7.10 Bus reset.27
7.11 Plug control register access rules.27
8 Connection management procedures (CMP).28
8.1 Introduction .28
8.2 Managing point-to-point connections .29
8.2.1 Procedure for establishing a point-to-point connection.29
8.2.2 Procedure for overlaying a point-to-point connection .30
8.2.3 Procedure for breaking a point-to-point connection.31
8.3 Managing broadcast-out connections .32
8.3.1 Procedure for establishing a broadcast-out connection .32
8.3.2 Procedure for overlaying a broadcast-out connection.33
8.3.3 Procedure for breaking a broadcast-out connection .33
8.4 Managing broadcast-in connections.34

61883-1 © IEC:2008(E) – 3 –
8.4.1 Procedure for establishing a broadcast-in connection .34
8.4.2 Procedure for overlaying a broadcast-in connection.35
8.4.3 Procedure for breaking a broadcast-in connection .35
8.5 Managing connections after a bus reset .36
8.5.1 Procedure for restoring a point-to-point connection after a bus reset .36
8.5.2 Procedure for restoring a broadcast-out connection after a bus reset .37
8.5.3 Procedure for restoring a broadcast-in connection after a bus reset .38
9 Function control protocol (FCP) .38
9.1 Introduction .38
9.2 Asynchronous packet structure.39
9.3 FCP frame structure .40
9.3.1 Vendor unique command/transaction set .41
9.3.2 Extended command/transaction set .42

Figure 1 – Configuration ROM .10
Figure 2 – Isochronous packet .12
Figure 3 – CIP header.13
Figure 4 – Model of transmission of source packets.14
Figure 5 – Two quadlets CIP header (Form_0, Form_1=0) .14
Figure 6 – Source packet header format .15
Figure 7 – Plug and PR usage .19
Figure 8 – Connections.20
Figure 9 – Plug state diagram .21
Figure 10 – oMPR format.22
Figure 11 – iMPR format .23
Figure 12 – oPCR format .24
Figure 13 – iPCR format .26
Figure 14 – PCR address map .27
Figure 15 – Point-to-point and broadcast connection counter modifications .29
Figure 16 – Establishing a point-to-point connection .30
Figure 17 – Overlaying a point-to-point connection .31
Figure 18 – Breaking a point-to-point connection .32
Figure 19 – Establishing a broadcast-out connection .33
Figure 20 – Overlaying a broadcast-out connection.33
Figure 21 – Breaking a broadcast-out connection .34
Figure 22 – Establishing a broadcast-in connection .
...