prEN IEC 61300-3-14:2024
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-14: Untersuchungen und Messungen - Abweichung und Reproduzierbarkeit der Einstellung eines einstellbaren optischen Dämpfungsgliedes
Dispositifs d’interconnexion et composants fibroniques - Procédures fondamentales d’essais et de mesures - Partie 3-14: Examens et mesures - Erreur et répétabilité des positions d’affaiblissement d’un affaiblisseur optique variable
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-14. del: Preiskave in meritve - Pogrešek in ponovljivost nastavitev slabljenja spremenljivega atenuatorja
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61300-3-14:2024
01-julij-2024
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-14. del: Preiskave in meritve - Pogrešek in ponovljivost nastavitev
slabljenja spremenljivega atenuatorja
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-14: Examinations and measurements - Error and
repeatability of the attenuation settings of a variable optical attenuator
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-14: Untersuchungen und Messungen - Abweichung und
Reproduzierbarkeit der Einstellung eines einstellbaren optischen Dämpfungsgliedes
Dispositifs d’interconnexion et composants fibroniques - Procédures fondamentales
d’essais et de mesures - Partie 3-14: Examens et mesures - Erreur et répétabilité des
positions d’affaiblissement d’un affaiblisseur optique variable
Ta slovenski standard je istoveten z: prEN IEC 61300-3-14:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-3-14:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61300-3-14:2024
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61300-3-14:2024
86B/4913/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-3-14 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-06-07 2024-08-30
SUPERSEDES DOCUMENTS:
86B/4859/CD, 86B/4886A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part
3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical
attenuator
PROPOSED STABILITY DATE: 2031
NOTE FROM TC/SC OFFICERS:
Copyright © 2024 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this electronic
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writi ng from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61300-3-14:2024
86B/4913/CDV – 2 – IEC CDV 61300-3-14 © IEC 2024
CONTENTS
CONTENTS . 2
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
4 General description . 6
5 Apparatus . 8
5.1 Light source (LS) and launch conditions . 8
5.2 Power meter (PM) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.