EN 50516-1-1:2011

Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3

1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements that an SC-RJ connector set with one side protected by an industrial housing with the fibres terminated with cylindrical zirconia PC ferrules, an adaptor fitted with resilient alignment sleeves and patchcord shall meet in order for it to be categorised as an EN standard product. The product is rated IP67. Since different variants are permitted, product marking details are given in 3.6. 1.2 Intermateability Products conforming to the requirements of this specification will intermate and give the specified level of random attenuation and random return loss performance, provided that the same fibre type is used. The intention is that this will be true irrespective of the manufacturing source(s) of the product. 1.3 Operating environment The tests selected combined with the severities and durations, specified as category I, are intended to reflect, although they do not necessarily satisfy all the requirements of the boundary conditions of M3I3C3E3. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme.

Industrie-Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Steuerungs- und Datenübertragungssysteme - Produktnormen - Teil 1-1: Industriesteckverbinder der Bauart SC-RJ-PC zum Anschluss an Mehrmodenfasern der Typen A1a und A1b nach EN 60793-2-10 für die Kategorie I (Industrieumgebung) nach den Festlegungen in IEC/PAS 61753-1-3

Jeux de connecteurs industriels et composants d’interconnexion à utiliser dans les systèmes de communication et de commande par fibres optiques - Spécifications de produit - Partie 1 1: Type SC RJ PC industriel câblé sur fibre multimodale des catégories A1a et A1b de la norme EN 60793-2-10 pour satisfaire aux exigences de la catégorie I (environnements industriels) comme cela est spécifié dans l'IEC 61753-1-3

Sestavi industrijskih konektorjev in povezovalnih komponent za uporabo v krmilnih in komunikacijskih sistemih z optičnimi kabli - Specifikacije izdelka - 1-1. del: Industrijski tip SC-RJ PC, zaključen z večrodnim optičnim vlaknom kategorij A1a in A1b po EN 60793-2-10, ki ustreza zahtevam kategorije I (industrijska okolja), kot je specificirana v IEC/PAS 61753-X-Y

Ta evropski standard vsebuje začetne zahteve za dimenzije, optične in mehanske zahteve ter zahteve za okoljsko učinkovitost, ki jim mora ustrezati konektorski sestav SC-RJ, na eni strani zaščiten z industrijskim ohišjem, z vlakni, zaključenimi z valjasto cirkonijevo tulko PC, adapter s prožnimi obojkami in priključni kabel, da bi bili opredeljeni kot izdelek standarda EN. Proizvod je ocenjen kot IP67. Ker so dovoljene različice, so podrobnosti o označevanju izdelka navedene v 3.6.

General Information

• Status: Published
• Publication Date: 03-Nov-2011
• Withdrawal Date: 18-Jul-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jan-2019
• Ref Project: SIST EN 50516-1-1:2012 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-X-Y

Relations

• Corrected By: EN 50516-1-1:2011/AC:2012 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3
• Effective Date: 23-Oct-2012
• Corrected By: EN 50516-1-1:2011/AC:2012 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3
• Effective Date: 28-Aug-2012

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
6HVWDYLLQGXVWULMVNLKNRQHNWRUMHYLQSRYH]RYDOQLKNRPSRQHQW]DXSRUDERY
NUPLOQLKLQNRPXQLNDFLMVNLKVLVWHPLK]RSWLþQLPLNDEOL6SHFLILNDFLMHL]GHOND
GHO,QGXVWULMVNLWLS6&5-3&]DNOMXþHQ]YHþURGQLPRSWLþQLPYODNQRPNDWHJRULM
$DLQ$ESR(1NLXVWUH]D]DKWHYDPNDWHJRULMH,LQGXVWULMVNDRNROMD
NRWMHVSHFLILFLUDQDY,(&3$6;<
Industrial connector sets and interconnect components to be used in optical fibre control
and communication systems - Product specifications - Part 1-1: Type SC-RJ PC
industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet
the requirements of category I (industrial environments) as specified in IEC/PAS 61753-X
-Y
Industrie-Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-
Steuerungs- und Datenübertragungssysteme - Produktnormen - Teil 1-1:
Industriesteckverbinder der Bauart SC-RJ-PC zum Anschluss an Mehrmodenfasern der
Typen A1a und A1b nach EN 60793-2-10 für die Kategorie I (Industrieumgebung) nach
den Festlegungen in IEC 61753-1-3
Jeux de connecteurs industriels et composants d’interconnexion à utiliser dans les
systèmes de communication et de commande par fibres optiques - Spécifications de
produit - Partie 1 1: Type SC RJ PC industriel câblés sur fibre multimodale des
catégories A1a et A1b de la norme EN 60793-2-10 pour satisfaire aux exigences de la
catégorie I (environnements industriels) comme cela est spécifié dans la CEI 61753-1-3
Ta slovenski standard je istoveten z: EN 50516-1-1:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 50516-1-1
NORME EUROPÉENNE
November 2011
EUROPÄISCHE NORM
ICS 33.180.20
English version
Industrial connector sets and interconnect components to be used in
optical fibre control and communication systems -
Product specifications -
Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category
A1a and A1b multimode fibre to meet the requirements of category I
(industrial environments) as specified in IEC 61753-1-3

Jeux de connecteurs industriels et Industrie-Steckverbindersätze und
composants d’interconnexion à utiliser Verbindungsbauelemente für
dans les systèmes de communication et Lichtwellenleiter-Steuerungs- und
de commande par fibres optiques - Datenübertragungssysteme -
Spécifications de produit - Produktnormen -
Partie 1 1: Type SC RJ PC industriel Teil 1-1: Industriesteckverbinder der
câblés sur fibre multimodale des Bauart SC-RJ-PC zum Anschluss an
catégories A1a et A1b de la norme EN Mehrmodenfasern der Typen A1a und
60793-2-10 pour satisfaire aux exigences A1b nach EN 60793-2-10 für die
de la catégorie I (environnements Kategorie I (Industrieumgebung) nach den
industriels) comme cela est spécifié dans Festlegungen in IEC 61753-1-3
la CEI 61753-1-3
This European Standard was approved by CENELEC on 2011-07-19. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50516-1-1:2011 E
Contents
Foreword . 4
Introduction . 5
1 Scope . 8
1.1 Product definition . 8
1.2 Intermateability . 8
1.3 Operating environment . 8
1.4 Reliability . 8
1.5 Quality assurance . 8
2 Normative references . 8
3 Description . 10
3.1 General . 10
3.2 Plug . 10
3.3 Adaptor . 10
3.4 Materials . 10
3.5 Dimensions . 10
3.6 Colour and marking . 11
4 Variants . 12
4.1 Terminated plug . 12
4.2 Adaptor . 12
4.3 Identification of variants . 12
5 Dimensional requirements . 13
5.1 Outline dimensions . 13
5.2 Mating face and other limit dimensions . 16
6 Tests . 23
6.1 Sample size . 23
6.2 Test and measurement methods . 24
6.3 Test sequence . 24
6.4 Pass/fail criteria . 24
7 Test report . 24
8 Product qualification requirements . 24
8.1 Dimensional and marking requirements. 24
8.2 Optical performance requirements . 25
8.3 Mechanical performance requirements . 26
8.4 Environmental performance requirements . 30
Annex A (informative) Attenuation against reference . 33
A.1 Test details . 33
A.2 Reference SC-RJ connector details . 33
Annex B (normative) Sample size and product sourcing requirements . 34
Annex C (informative) Details of environmental classification out of EN 50173-1 (MICE) . 35
Annex D (informative) Details of sample construction . 36
Annex E (normative) Test setup – Bending moment test . 37
Annex F (informative) Patent statement concerning SC-RJ industrial connectors. 38
Bibliography . 39

– 3 – EN 50516-1-1:2011
Figures
Figure 1 – Outline dimensions – Plug . 13
Figure 2 – Outline dimensions – Fixed adaptor . 14
Figure 3 – Outline dimensions – Cut out for fixed adaptor mounting . 15
Figure 4 – Plug mating face and other limit dimensions . 16
Figure 5 – Ferrule endface geometry – After termination . 18
Figure 6 – Positioning of fibre core . 18
Figure 7 – Positioning of two fibre cores relative to each other . 19
Figure 8 – Ferrule endface geometry – Allowable undercut . 20
Figure 9 – Adaptor mating face and other limit dimensions . 21
Figure 10 – Pin gauge for adaptor . 23
Figure D.1 – Example of test specimen for Tests 1 – 13 . 36
Figure D.2 – Example of test specimen for Tests 14 – 19 . 36
Figure E.1 – Point of application of the load . 37

Tables
Table 1 – Preferred colour scheme . 11
Table 2 – Terminated plug – Plug variants . 12
Table 3 – Terminated plug – Adaptor variants . 12
Table 4 – Identification of plug variants . 12
Table 5 – Identification of adaptor variants . 12
Table 6 – Geometrical parameters . 19
Table 7 – Optical performance requirements . 25
Table 8 – Mechanical performance requirements . 26
Table 9 – Environmental performance requirements . 30
Table A.1 – Attenuation measurement: Test details . 33
Table B.1 – Sample size and product sourcing requirements . 34
Table C.1 .
...