prEN IEC 60938-2-1:2022
(Main)Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D
Ortsfeste Induktivitäten zur elektromagnetischen Störunterdrückung - Teil 2-1: Blank-Detailspezifikation - Induktivitäten, für die Sicherheitsprüfungen erforderlich sind - Bewertungsstufe D
Inductances fixes d'antiparasitage - Partie 2-1: Spécification particulière cadre - Inductances nécessitant des essais de sécurité - Niveau d'évaluation D
Fiksne dušilke za dušenje elektromagnetnega motenja - 2-1. del: Okvirna podrobna specifikacija - Dušilke, za katere so potrebni varnostni preskusi - Raven ocenjevanja D
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60938-2-1:2023
01-februar-2023
Fiksne dušilke za dušenje elektromagnetnega motenja - 2-1. del: Okvirna
podrobna specifikacija - Dušilke, za katere so potrebni varnostni preskusi - Raven
ocenjevanja D
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail
specification - Inductors for which safety tests are required - Assessment level D
Drosseln zur Unterdrückung elektromagnetischer Störungen - Teil 2-1: Vordruck für
Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind -
Bewertungsstufe D
Inductances fixes d'antiparasitage - Partie 2-1: Spécification particulière cadre -
Inductances nécessitant des essais de sécurité - Niveau d'évaluation D
Ta slovenski standard je istoveten z: prEN IEC 60938-2-1:2022
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
oSIST prEN IEC 60938-2-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60938-2-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60938-2-1:2023
40/2989/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60938-2-1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-09 2023-03-03
SUPERSEDES DOCUMENTS:
40/2934/CD, 40/2960/CC
IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
TITLE:
Fixed inductors for electromagnetic interference suppression – Part 2-1: Blank detail specification – Inductors
for which safety tests are required – Assessment level D
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60938-2-1:2023
40/2989/CDV – 2 – IEC CDV 60938-2-1 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED INDUCTORS FOR ELECTROMAGNETIC
INTERFERENCE SUPPRESSION –
Part 2-1: Blank detail specification –
Inductors for which safety tests are required
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.