Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures - Ribbon dimensions - Aperture gauge, method G3

IEC 60794-1-303: 2023 describes test procedures to be used in establishing uniform requirements for the geometrical properties of optical fibre ribbons. This document applies to optical fibre ribbons for use with telecommunication equipment and devices employing similar techniques, and to optical fibre ribbons for cables having a combination of both optical fibres and electrical conductors. This document partially cancels and replaces IEC 60794-1-23:2019. In the context of the revision of IEC 60794-1-23:2019, its contents were split into separate test methods.

Lichtwellenleiterkabel - Teil 1-303: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Bandmaße - Aperturmessgerät, Verfahren G3

Câbles à fibres optiques - Partie 1-303: Spécification générique - Procédures fondamentales d'essai des câbles optiques - Dimensions du ruban - Gabarit d’ouverture, méthode G3

IEC 60794-1-303: 2023 décrit les procédures d’essai à utiliser afin d'établir des exigences uniformes applicables aux propriétés géométriques des rubans de fibres optiques. Le présent document s’applique aux rubans de fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs qui utilisent des techniques similaires, ainsi qu'aux rubans de fibres optiques pour les câbles qui combinent à la fois des fibres optiques et des conducteurs électriques. Ce document annule et remplace en partie l'IEC 60794-1-23:2019. La révision de l'IEC 60794­1-23:2019 a donné lieu à un éclatement de son contenu en méthodes d’essai distinctes.

Optični kabli - 1-303. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Mere odprtine - Metoda G3 (IEC 60794-1-303:2023)

Standard IEC 60794-1-303: 2023 opisuje preskusne postopke, ki jih je treba uporabiti pri določanju enotnih zahtev za geometrijske lastnosti trakov iz optičnih vlaken. Ta dokument se uporablja za trakove iz optičnih vlaken za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter trakove iz optičnih vlaken v kablih s kombinacijo optičnih vlaken in električnih vodnikov. Dokument delno razveljavlja in nadomešča standard IEC 60794-1-23:2019. V okviru spremembe standarda IEC 60794-1-23:2019 je bila njegova vsebina razdeljena na ločene preskusne metode.

General Information

Status
Published
Publication Date
11-May-2023
Current Stage
6060 - Document made available - Publishing
Start Date
12-May-2023
Due Date
23-Jun-2023
Completion Date
12-May-2023

Relations

Buy Standard

Standard
EN IEC 60794-1-303:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60794-1-303:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60794-1-303:2023
01-julij-2023
Nadomešča:
SIST EN IEC 60794-1-23:2020
Optični kabli - 1-303. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Mere odprtine - Metoda
G3 (IEC 60794-1-303:2023)
Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test
procedures - Cable element test methods - Ribbon dimensions - Aperture gauge,
Method G3 (IEC 60794-1-303:2023)
Lichtwellenleiterkabel - Teil 1-303: Fachgrundspezifikation - Grundlegende Prüfverfahren
für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Bandmaße -
Aperturmessgerät, Verfahren G3 (IEC 60794-1-303:2023)
Câbles à fibres optiques - Partie 1-303: Spécification générique - Procédures
fondamentales d'essai des câbles optiques - Dimensions des rubans - Gabarit
d’ouverture, méthode G3 (IEC 60794-1-303:2023)
Ta slovenski standard je istoveten z: EN IEC 60794-1-303:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-303:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-303:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-303:2023


EUROPEAN STANDARD EN IEC 60794-1-303

NORME EUROPÉENNE

EUROPÄISCHE NORM May 2023
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-303: Generic specification - Basic
optical cable test procedures - Ribbon dimensions - Aperture
gauge, method G3
(IEC 60794-1-303:2023)
Câbles à fibres optiques - Partie 1-303: Spécification Lichtwellenleiterkabel - Teil 1-303: Fachgrundspezifikation -
générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Dimensions du ruban - Gabarit d'ouverture, Prüfverfahren für Kabelelemente - Bandmaße -
méthode G3 Aperturmessgerät, Verfahren G3
(IEC 60794-1-303:2023) (IEC 60794-1-303:2023)
This European Standard was approved by CENELEC on 2023-05-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60794-1-303:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-303:2023
EN IEC 60794-1-303:2023 (E)
European foreword
The text of document 86A/2299/FDIS, future edition 1 of IEC 60794-1-303, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-303:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-10
document have to be withdrawn

This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-303:2023 was approved by CENELEC as a
European Standard without any modification.
...

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-303:2022
01-oktober-2022
Nadomešča:
SIST EN IEC 60794-1-23:2020
Optični kabli - 1-303. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Mere odprtine - Metoda
G3
Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test
procedures - Cable element test methods - Ribbon dimensions - Aperture gauge,
Method G3
Câbles à fibres optiques - Partie 1-303: Spécification générique - Procédures
fondamentales d'essai des câbles optiques - Dimensions des rubans - Gabarit
d’ouverture, méthode G3
Ta slovenski standard je istoveten z: prEN IEC 60794-1-303:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-303:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-303:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-303:2022
86A/2199/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-303 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-10 2022-09-02
SUPERSEDES DOCUMENTS:
86A/2157/CD, 86A/2194/CC

IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures -
Cable element test methods - Ribbon dimensions - Aperture gauge, Method G3

PROPOSED STABILITY DATE: 2025

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-303:2022
IEC CDV 60794-1-303/Ed1 © IEC 2022 – 2 – 86A/2199/CDV
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 General requirements . 5
8 5 Method G3: Ribbon dimensions – Visual method . 5
9 5.1 Object . 5
10 5.2 Sample . 6
11 5.3 Apparatus . 6
12 5.4 Procedure . 6
13 5.5 Requirement . 6
14 5.6 Details to be specified . 6
15 Bibliography . 7
16
17
18 Figure 1 – Aperture gauge .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.