EN 61753-1:2007

Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards

IEC 61753-1 deals with performance standards for all passive fibre optic products, including connectors, passive optical components, fibre management systems and closures. It defines those tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 1: Allgemeines und Leitfaden für Betriebsverhaltensnormen

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 1: Généralités et lignes directrices pour l'établissement des normes de qualité de fonctionnement

La CEI 61753-1 couvre les normes de qualité de fonctionnement applicables à tous les produits passifs à fibres optiques, y compris les connecteurs, les composants optiques passifs, les systèmes de gestion de fibres et les boîtiers. Elle définit les essais et les sévérités qui constituent les catégories de qualité de fonctionnement ou les environnements de service ou de fonctionnement général et elle identifie les essais qui sont considérés comme spécifiques à un produit.

Izvedbeni standard za optične spojne elemente in pasivne komponente - 1. del: Splošno in navodila za izvedbene standarde (IEC 61753-1:2007)

Ta del IEC 61753 obravnava izvedbene standarde za vse pasivne optične proizvode, vključno s konektorji, pasivnimi optičnimi komponentami, sistemi za delo z vlakni in spojkami. Serija IEC 61753 je objavljena v več delih. Ta prvi del zajema splošne informacije o izvedbenih standardih. Opredeljuje preskuse in natančnosti, ki oblikujejo izvedbene kategorije ali splošna delovna okolja za obratovanje, in določa preskuse, ki so specifični za posamezen proizvod. Podrobnosti o preskusih in natančnosti so navedene v dodatku A. Prvi del vključuje reference, opredelitve in pravila za oblikovanje izvedbenih standardov, skupaj z informativnimi dodatki, kot je opis preskusnega zaporedja, naveden v dodatku B, in drugimi ustreznimi informacijami. Nadaljnji deli, ki sestavljajo IEC 61753, so znani kot izvedbeni standardi in so oštevilčeni glede na razvrstitev, opredeljeno v dodatku C. Ti standardi vsebujejo minimalne natančnosti preskusa in meritve, ki jim mora določen proizvod zadostiti, da izpolnjuje zahteve za uporabo v določenem delovnem okolju. Izvedbeni standard nekega proizvoda vsebuje kombinacijo preskusov in meritev, ki so skupni za vse pasivne optične proizvode za določeno delovno okolje ali izvedbeno kategorijo, in tiste, ki so specifični za določen proizvod v tem okolju.

General Information

• Status: Withdrawn
• Publication Date: 13-Nov-2007
• Withdrawal Date: 30-Sep-2010
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Sep-2019
• Completion Date: 19-Sep-2019
• Ref Project: SIST EN 61753-1:2010 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1:2007)

Relations

• Replaces: EN 61753-1-1:2001 - Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors)
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 61753-1:2018 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2010
1DGRPHãþD
SIST EN 61753-1-1:2002
,]YHGEHQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWHGHO
6SORãQRLQQDYRGLOD]DL]YHGEHQHVWDQGDUGH,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 1: General and guidance for performance standards (IEC 61753-1:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
1: Allgemeines und Leitfaden für Betriebsverhaltensnormen (IEC 61753-1:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 1: Généralités et lignes directrices relatives aux normes
de qualité de fonctionnement (CEI 61753-1:2007)
Ta slovenski standard je istoveten z: EN 61753-1:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-1
NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61753-1-1:2001

English version
Fibre optic interconnecting devices and passive components
performance standard -
Part 1: General and guidance for performance standards

(IEC 61753-1:2007)
Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 1: Généralités et lignes directrices Betriebsverhalten -
relatives aux normes Teil 1: Allgemeines und Leitfaden
de qualité de fonctionnement für Betriebsverhaltensnormen
(CEI 61753-1:2007) (IEC 61753-1:2007)

This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-1:2007 E
Foreword
The text of document 86B/2452/FDIS, future edition 1 of IEC 61753-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-1 on 2007-10-01.
This European Standard supersedes EN 61753-1-1:2001.
Specific technical changes vis-à-vis EN 61753-1-1:2001 include that EN 61753-1:2007 covers all passive
fibre optic products, including connectors, passive optical components, fibre management systems and
closures.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
Annex ZA has been added by CENELEC.
__________
Notice
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc. ("Telcordia").
All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use
of said material in this IEC document may differ from that of Telcordia. Telcordia makes no representation
or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information or
opinion contained herein. Any use of or reliance upon said information or opinion is at the risk of the user.
Telcordia shall not be liable for any damage or injury incurred by any person arising out of the sufficiency,
accuracy, or utility of any information or opinion contained herein.
__________
Endorsement notice
The text of the International Standard IEC 61753-1:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1:1994 (not modified).
__________
– 3 – EN 61753-1:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60529 – Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993

1) 2)
IEC 60590 – Determination of the aromatic hydrocarbon HD 382 S1 1979
content of new mineral insulating oils

1) 2)
IEC 61300-2-1 – Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

1) 2)
IEC 61300-2-2 – Fibre optic interconnecting devices and EN 61300-2-2 2003
passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability

1) 2)
IEC 61300-2-4 – Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

1) 2)
IEC 61300-2-5 – Fibre optic interconnecting devices and EN 61300-2-5 2002
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion/twist

1) 2)
IEC 61300-2-6 – Fibre optic interconnecting devices and
EN 61300-2-6 1997
passive components - Basic test and
measurement procedures -
Part 2-6: Tests - Tensile strength of coupling
mechanism
IEC 61300-2-7 1995 Fibre optic interconnecting devices and EN 61300-2-7 1997
passive components - Basic test and
measurement procedures -
Part 2-7: Tests - Bending moment

1) 2)
IEC 61300-2-9 – Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
IEC 61300-2-10 1995 Fibre optic interconnecting devices and EN 61300-2-10 1997
passive components - Basic test and
measurement procedures -
Part 2-10: Tests - Crush resistance

IEC 61300-2-11 1995 Fibre optic interconnecting devices and EN 61300-2-11 1997
passive components - Basic test and
measurement procedures -
Part 2-11: Tests - Axial compression

1) 2)
IEC 61300-2-12 – Fibre optic interconnecting devices and EN 61300-2-12 2005
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact
1) 2)
IEC 61300-2-17 – Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
1) 2)
IEC 61300-2-18 – Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance
1) 2)
IEC 61300-2-19 – Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

1) 2)
IEC 61300-2-21 – Fibre optic interconnecting devices and EN 61300-2-21 1997
passive components - Basic test and
measurement procedures -
Part 2-21: Tests - Composite
temperature-humidity cyclic test

1) 2)
IEC 61300-2-22 – Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

1) 2)
IEC 61300-2-23 – Fibre optic interconnecting devices and EN 61300-2-23 1997
passive components - Basic test and
measurement procedures -
Part 2-23: Tests - Sealing for non-pressurized
closures of fibre optic devices

1) 2)
IEC 61300-2-26 – Fibre optic interconnecting devices and EN 61300-2-26 2007
passive components - Basic test and
measurement procedures -
Part 2-26: Tests - Salt mist
1) 2)
IEC 61300-2-27 – Fibre optic interconnecting devices and EN 61300-2-27 1997
passive components - Basic test and
measurement procedures -
Part 2-27: Tests - Dust - Laminar flow

– 5 – EN 61753-1:2007
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-28 – Fibre optic interconnecting devices and EN 61300-2-28 1997
passive components - Basic test and
measurement procedures -
Part 2-28: Tests - Industrial atmosphere
(sulphur dioxide)
1) 2)
IEC 61300-2-33 – Fibre optic interconnecting devices and EN 61300-2-33 2007
passive components - Basic test and
measurement procedures -
Part 2-33: Tests - Assembly and disassembly
of fibre optic closures
1) 2)
IEC 61300-2-34 – Fibre optic interconnecting devices and EN 61300-2-34 1997
passive components - Basic test and
measurement procedures -
Part 2-34: Tests - Resistance to solvents and
contaminating fluids
1) 2)
IEC 61300-2-37 – Fibre optic interconnecting devices and EN 61300-2-37 2007
passive components - Basic test and
measurement procedures -
Part 2-37: Tests - Cable bending for fibre
optic closures
1) 2)
IEC 61300-2-38 – Fibre optic interconnecting devices and EN 61300-2-38 2006
passive components - Basic test and
measurement procedures -
Part 2-38: Tests - Sealing for pressurized
fibre optic closures
1) 2)
IEC 61300-2-42 – Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
1) 2)
IEC 61300-2-44 – Fibre optic interconnecting devices and EN 61300-2-44 2005
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
1) 2)
IEC 61300-2-45 – Fibre optic interconnecting devices and
EN 61300-2-45 1999
passive components - Basic test and
measurement procedures -
Part 2-45: Tests - Durability test by water
immersion
1) 2)
IEC 61300-2-46 – Fibre optic interconnecting devices and EN 61300-2-46 2006
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic

1) 2)
IEC 61300-2-48 – Fibre optic interconnecting devices and EN 61300-2-48 2003
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-49 – Fibre optic interconnecting devices and EN 61300-2-49 2007
passive components - Basic test and
measurement procedures -
Part 2-49: Tests - Connector installation test

1) 2)
IEC 61300-2-50 – Fibre optic interconnecting devices and EN 61300-2-50 2007
passive components - Basic test and
measurement procedures -
Part 2-50: Tests - Fibre optic connector proof
test with static load - Singlemode and
multimode
1) 2)
IEC 61300-2-51 – Fibre optic interconnecting devices and EN 61300-2-51 2007
passive components - Basic test and
measurement procedures -
Part 2-51: Tests - Fibre optic connector test
for transmission with applied tensile load -
singlemode and multimode
1) 2)
IEC 61300-3-3 – Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
1) 2)
IEC 61300-3-4 – Fibre optic interconnecting devices and EN 61300-3-4 2001
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
1) 2)
IEC 61300-3-6 – Fibre optic interconnecting devices and EN 61300-3-6 2003
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
1) 2)
IEC 61300-3-28 – Fibre optic interconnecting devices and EN 61300-3-28 2002
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
1) 2)
IEC 61300-3-34 – Fibre optic interconnecting devices and EN 61300-3-34 2002
passive components - Basic test and
measurement procedures -
Part 3-34: Examinations and measurements -
Attenuation of random mated connectors

1)
IEC Guide 109 – Environmental aspects - Inclusion in – –
electrotechnical product standards

ISO 1998 Series Petroleum industry - Terminology – –

INTERNATIONAL IEC
STANDARD 61753-1
First edition
2007-03
Fibre optic interconnecting devices and
passive components performance standard –
Part 1:
General and guidance for performance standards
© IEC 2007 ⎯ Copyright - all rights reserved
No part
...