EN 61755-2-2:2006

Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres

Defines a set of prescribed conditions that must be maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of fibres. Performance grades are classified into four categories for attenuation and one for return loss measurements.

Optische Schnittstellen von Lichtwellenleiter-Steckverbindern - Teil 2-2: Optische Schnittstellen von abgeschrägten Einmodenfasern mit physikalischem Kontakt

Interfaces optiques de connecteurs pour fibres optiques - Partie 2-2: Interfaces optiques pour fibres unimodales en contact physique avec angle

Définit un ensemble de conditions qui sont applicables aux paires de fibres accouplées de manière aléatoire, et qui doivent être respectées pour répondre aux exigences de performances en ce qui concerne l'atténuation et la perte par réflexion des fibres en question. Les classes de performances donnent lieu à quatre catégories pour les mesures d'atténuation et à une catégorie pour la mesure de la perte par réflexion.

Optični vmesniki za optične konektorje – 2-2. del: Standard za optični vmesnik za enorodna vlakna, ki se stikajo fizično pod kotom (IEC 61755-2-2:2006)

General Information

• Status: Withdrawn
• Publication Date: 16-Nov-2006
• Withdrawal Date: 30-Sep-2009
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Oct-2023
• Completion Date: 19-Oct-2023
• Ref Project: SIST EN 61755-2-2:2007 - Fibre optic connector optical interfaces -- Part 2-2: Optical interface standard single mode angled physically contacting fibres

Relations

• Replaced By: EN IEC 61755-2-2:2022 - Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres - Angled
• Effective Date: 25-Oct-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2007
2SWLþQLYPHVQLNL]DRSWLþQHNRQHNWRUMH±GHO6WDQGDUG]DRSWLþQLYPHVQLN]D
HQRURGQDYODNQDNLVHVWLNDMRIL]LþQRSRGNRWRP,(&
Fibre optic connector optical interfaces -- Part 2-2: Optical interface standard single
mode angled physically contacting fibres (IEC 61755-2-2:2006)
Optische Schnittstellen von Lichtwellenleiter-Steckverbindern - Teil 2-2: Optische
Schnittstellen von abgeschrägten Einmodenfasern mit physikalischem Kontakt (IEC
61755-2-2:2006)
Interfaces optiques de connecteurs pour fibres optiques -- Partie 2-2: Interfaces optiques
pour fibres unimodales en contact physique avec angle (IEC 61755-2-2:2006)
Ta slovenski standard je istoveten z: EN 61755-2-2:2006
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61755-2-2
NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic connector optical interfaces
Part 2-2: Optical interface standard single mode angled
physically contacting fibres
(IEC 61755-2-2:2006)
Interfaces optiques de connecteurs  Optische Schnittstellen von
pour fibres optiques Lichtwellenleiter-Steckverbindern
Partie 2-2: Interfaces optiques Teil 2-2: Optische Schnittstellen
pour fibres unimodales en contact von abgeschrägten Einmodenfasern
physique avec angle mit physikalischem Kontakt
(CEI 61755-2-2:2006) (IEC 61755-2-2:2006)

This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-2-2:2006 E
Foreword
The text of document 86B/2317/FDIS, future edition 1 of IEC 61755-2-2, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61755-2-2 on 2006-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
__________
Endorsement notice
The text of the International Standard IEC 61755-2-2:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61755-2-1 NOTE  Harmonized as EN 61755-2-1:2006 (not modified).
__________
NORME CEI
INTERNATIONALE
IEC
61755-2-2
INTERNATIONAL
Première édition
STANDARD
First edition
2006-07
Interfaces optiques de connecteurs
pour fibres optiques –
Partie 2-2:
Interfaces optiques pour fibres unimodales
en contact physique avec angle

Fibre optic connector optical interfaces –
Part 2-2:
Optical interface standard single mode
angled physically contacting fibres

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
G
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61755-2-2  IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC CONNECTOR OPTICAL INTERFACES –

Part 2-2: Optical interface standard single mode
angled physically contacting fibres

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and c
...