prEN IEC 60793-2-60:2024
(Main)Optical fibres - Part 2-60: Product specifications - Sectional specification for category c single-mode interconnection fibres
Optical fibres - Part 2-60: Product specifications - Sectional specification for category c single-mode interconnection fibres
Lichtwellenleiter – Teil 2-60: Produktspezifikationen – Rahmenspezifikation für Einmoden-Verbindungsfasern der Kategorie C
Fibres optiques - Partie 2-60: Spécifications de produits - Spécification intermédiaire pour les fibres d’interconnexion unimodales de catégorie c
Optična vlakna - 2-60. del: Specifikacije izdelka - Področna specifikacija za enorodovna vlakna kategorije C za notranje povezovanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Optična vlakna - 2-60. del: Specifikacije izdelka - Področna specifikacija za
enorodna vlakna kategorije C za notranje povezovanje
Optical fibres - Part 2-60: Product specifications - Sectional specification for category C
single-mode interconnection fibres
Fibres optiques - Partie 2-60: Spécifications de produits - Spécification intermédiaire
pour les fibres d’interconnexion unimodales de catégorie c
Ta slovenski standard je istoveten z: prEN IEC 60793-2-60:2024
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86A/2470/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60793-2-60 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-07-19 2024-10-11
SUPERSEDES DOCUMENTS:
86A/2430/CD, 86A/2467/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibres - Part 2-60: Product specifications - Sectional specification for category C
single-mode interconnection fibres
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 60793-2-60/Ed2 IEC:2024 – 2 – 86A/2470/CDV
1 CONTENTS
2 FOREWORD . 4
3 1 Scope . 6
4 2 Normative references . 6
5 3 Terms and definitions . 7
6 3.1 Terms and definitions. 7
7 3.2 Interconnection fibres . 7
8 5 Specifications . 7
9 5.1 General………………………………………………………………………………………. . 7
10 5.2 Dimensional requirements . 8
11 5.3 Mechanical requirements . 9
12 5.4 Transmission requirements. 9
13 5.5 Environmental requirements . 10
14 5.5.1 Transmission requirements . 11
15 5.5.2 Mechanical requirements . 11
16 Annex A (normative) Family specification for C1 single-mode fibre . 13
17 A.1 Introduction . 13
18 A.2 Dimensional requirements . 13
19 A.3 Mechanical requirements . 13
20 A.4 Transmission requirements . 15
21 A.5 Environmental requirements . 15
22 A.5.1 Transmission requirements . 15
23 A.5.2 Mechanical requirements – Coating strip force . 15
24 Annex B (normative) Family specification for C2 single-mode fibre . 17
25 B.1 Introduction . 17
26 B.2 Dimensional requirements . 17
27 B.3 Mechanical requirements . 17
28 B.4 Transmission requirements . 18
29 B.5 Environmental requirements . 18
30 B.5.1 Transmission requirements . 18
31 B.5.2 Mechanical requirements – Coating strip force . 18
32 Annex C (normative) Family specification for C3 single-mode fibre . 20
33 C.1 Introduction . 20
34 C.2 Dimensional requirements . 20
35 C.3 Mechanical requirements . 20
36 C.4 Transmission requirements . 21
37 C.5 Environmental requirements . 21
38 C.5.1 Transmission requirements . 21
39 C.5.2 Mechanical requirements – Coating strip force . 21
40 Annex D (normative) Family specification for C4 single-mode fibre . 22
41 D.1 Introduction . 22
42 D.2 Dimensional requirements . 22
43 D.3 Mechanical requirements . 22
44 D.4 Transmission requirements . 23
45 D.5 Environmental requirements . 23
46 D.5.1 Transmission requirements . 23
47 D.5.2 Mechanical requirements – Coating strip force . 23
IEC CDV 60793-2-60/Ed2 IEC:2024 – 3 – 86A/2470/CDV
48 Bibliography . 24
50 Table 1 – List of families and main differences . 8
51 Table 2 – Dimensional attributes and measurement methods . 8
52 Table 3 – Requirements common to class C fibres . 9
53 Table 4 – Mechanical attributes and measurement methods . 9
54 Table 5 – Mechanical requirements common to class C fibres . 9
55 Table 6 – Transmission attributes and measurement methods . 10
56 Table 7 – Transmission requirements common to class C fibres . 10
57 Table 8 – Transmission attributes required in family specifications . 10
58 Table 9 – Environmental attributes and test methods . 10
59 Table 10 – Environment dependant mechanical or transmission attributes and test
60 methods . 11
61 Table 11 – Tensile strength requirements common to class C fibres . 11
62 Table 12 – Stress corrosion susceptibility requirements common to class C fibres . 12
63 Table A.1 – Dimensional requirements for C1 fibres. 13
64 Table A.2 – Mechanical requirements for C1 fibres . 14
65 Table A.3 – Transmission requirements for C1 fibres . 15
66 Table A.4 – Environment dependant transmission requirements for C1 fibres . 15
67 Table A.5 – Environment dependant mechanical requirements for C1 fibres . 16
68 Table B.1 – Dimensional requirements for C2 fibres. 17
69 Table B.2 – Mechanical requirements for C2 fibres . 17
70 Table B.3 – Transmission requirements for C2 fibres . 18
71 Table B.4 – Environment dependant transmission requirements for C2 fibres . 18
72 Table B.5 – Environment dependant mechanical requirements for C2 fibres . 19
73 Table C.1 – Dimensional requirements for C3 fibres . 20
74 Table C.2 – Mechanical requirements for C3 fibres . 20
75 Table C.3 – Transmission requirements for C3 fibres . 21
76 Table C.4 – Environment dependant transmission requirements for C3 fibres . 21
77 Table C.5 – Environment dependant mechanical requirements for C3 fibres . 21
78 Table D.1 – Dimensional requirements for C4 fibres . 22
79 Table D.2 – Mechanical requirements for C4 fibres . 22
80 Table D.3 – Transmission requirements for C4 fibres . 23
81 Table D.4 – Environment dependant transmission requirements for C4 fibres . 23
IEC CDV 60793-2-60/Ed2 IEC:2024 – 4 – 86A/2470/CDV
85 INTERNATIONAL ELECTROTECHNICAL COMMISSION
86 ____________
87 OPTICAL FIBRES –
89 Part 2-60: Product specifications –
90 Sectional specification for category C
91 single-mode interconnection fibres
93 FOREWORD
94 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
95 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
96 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
97 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
98 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
99 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
100 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
101 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
102 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
103 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
104 consensus of opinion on the relevant subjects since each technical committee has representation from all
105 interested IEC National Committees.
106 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
107 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
108 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
109 misinterpretation by any end user.
110 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
111 transparently to the maximum extent possible in their national and regional publications. Any div
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.