ETSI EN 305 550-2 V1.2.1 (2014-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
REN/ERM-TG28-502
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Naprave kratkega dosega (SRD) - Radijska oprema, ki se uporablja v frekvenčnem območju od 40 GHz do 246 GHz - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Vzdrževanje 2. dela, da bo R&TTE v skladu s spremembami v 1. delu.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment to be used in the 40 GHz to 246 GHz frequency range - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 305 550-2 Version 1.2.1SIST EN 305 550-2 V 1.2.1:2014en01-december-2014SIST EN 305 550-2 V 1.2.1:2014SLOVENSKI
STANDARD
SIST EN 305 550-2 V 1.2.1:2014
ETSI EN 305 550-2 V1.2.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
HARMONIZED EUROPEAN STANDARD SIST EN 305 550-2 V 1.2.1:2014
ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 2
Reference REN/ERM-TG28-502 Keywords Harmonized standard, radio, regulation,
SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 305 550-2 V 1.2.1:2014
ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Modal verbs terminology . 5 Introduction . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 7 3.1 Definitions . 7 3.2 Symbols . 7 3.3 Abbreviations . 7 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 Conformance requirements . 8 4.2.1 Transmitter requirements . 8 4.2.1.1 Spectral power density . 8 4.2.1.2 RF output power . 8 4.2.1.3 Permitted range of operating frequencies . 8 4.2.1.4 Out-of-band emissions . 8 4.2.1.5 Unwanted emissions in the spurious domain . 8 4.2.2 Receiver requirements . 8 4.2.2.1 Unwanted emissions. 8 5 Testing for compliance with technical requirements . 9 5.1 Description of testing for compliance with technical requirements . 9 5.1.1 Environmental conditions for testing . 9 5.1.1.1 Normal and extreme test-conditions. 9 5.1.1.2 Test power source . 9 5.1.2 Choice of samples for test suites . 9 5.2 Interpretation of the measurement results . 9 5.3 Essential transmitter test suites . 9 5.3.1 Spectral power density . 9 5.3.2 RF output power . 10 5.3.3 Permitted range of operation frequencies . 10 5.3.4 Out-of-band emissions . 10 5.3.5 Unwanted emissions in the spurious domain . 10 5.4 Essential receiver test suites . 10 5.4.1 unwanted radiated components . 10 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 11 Annex B (informative): Void . 13 Annex C (informative): Bibliography . 14 History . 15
SIST EN 305 550-2 V 1.2.1:2014
ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is a new standard that takes advantage of technical developments within the SRD industry. In particular this includes the development in technologies which makes applications in the higher frequency range possible. The present document has been produced by ETSI in response to a mandate M/284 issued from the European Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.9]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 17 October 2014 Date of latest announcement of this EN (doa): 31 January 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 July 2015 Date of withdrawal of any conflicting National Standard (dow): 31 July 2016
SIST EN 305 550-2 V 1.2.1:2014
ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 5 Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.4]. SIST EN 305 550-2 V 1.2.1:2014
ETSI ETSI EN 305 550-2 V1.2.1 (2014-10) 6 1 Scope The present document applies to the following Short Range Device major equipment types: • Generic Short Range Devices, including alarms, telecommand, telemetry, data transmission in general, etc. These radio equipment types are capable of operating in the frequency bands within the 40 GHz to 246 GHz range as specified in table 1: • either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna; • for all types of modulation. Table 1 shows a list of the frequency bands as designated in the CEPT/ERC Recommendation 70-03 [i.3] as known at the date of publication of the present document. NOTE 1: Table 1 represents the most widely implemented position within the CEPT countries [i.3], but it should not be assumed that all designated bands are available in all countries. It is also foreseen that these frequencies may be implemented in European Commission Decision 2006/771/EC [i.6], European Commission Decision 2013/752/EU [i.7] and CEPT/ERC Recommendation 74-01 [i.8] in the future. Table 1: Short Range Devices within the 40 GHz to 246 GHz frequency range Frequency Bands Applications Notes 57 GHz to 64 GHz Non-specific SR
...
ETSI EN 305 550-2 V1.2.1 (2014-10)
HARMONIZED EUROPEAN STANDARD
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment to be used
in the 40 GHz to 246 GHz frequency range;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 305 550-2 V1.2.1 (2014-10)
Reference
REN/ERM-TG28-502
Keywords
Harmonized standard, radio, regulation, SRD,
testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 305 550-2 V1.2.1 (2014-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Spectral power density . 8
4.2.1.2 RF output power . 8
4.2.1.3 Permitted range of operating frequencies . 8
4.2.1.4 Out-of-band emissions . 8
4.2.1.5 Unwanted emissions in the spurious domain . 8
4.2.2 Receiver requirements . 8
4.2.2.1 Unwanted emissions. 8
5 Testing for compliance with technical requirements . 9
5.1 Description of testing for compliance with technical requirements . 9
5.1.1 Environmental conditions for testing . 9
5.1.1.1 Normal and extreme test-conditions. 9
5.1.1.2 Test power source . 9
5.1.2 Choice of samples for test suites . 9
5.2 Interpretation of the measurement results . 9
5.3 Essential transmitter test suites . 9
5.3.1 Spectral power density . 9
5.3.2 RF output power . 10
5.3.3 Permitted range of operation frequencies . 10
5.3.4 Out-of-band emissions . 10
5.3.5 Unwanted emissions in the spurious domain . 10
5.4 Essential receiver test suites . 10
5.4.1 unwanted radiated components . 10
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 11
Annex B (informative): Void . 13
Annex C (informative): Bibliography . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 305 550-2 V1.2.1 (2014-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document is a new standard that takes advantage of technical developments within the SRD industry. In
particular this includes the development in technologies which makes applications in the higher frequency range
possible.
The present document has been produced by ETSI in response to a mandate M/284 issued from the European
Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.9].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range,
as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 17 October 2014
Date of latest announcement of this EN (doa): 31 January 2015
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 July 2015
Date of withdrawal of any conflicting National Standard (dow): 31 July 2016
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 305 550-2 V1.2.1 (2014-10)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 305 550-2 V1.2.1 (2014-10)
1 Scope
The present document applies to the following Short Range Device major equipment types:
• Generic Short Range Devices, including alarms, telecommand, telemetry, data transmission in general, etc.
These radio equipment types are capable of operating in the frequency bands within the 40 GHz to 246 GHz range as
specified in table 1:
• either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
• for all types of modulation.
Table 1 shows a list of the frequency bands as designated in the CEPT/ERC Recommendation 70-03 [i.3] as known at
the date of publication of the present document.
NOTE 1: Table 1 represents the most widely implemented position within the CEPT countries [i.3], but it should
not be assumed that all designated bands are available in all countries. It is also foreseen that these
frequencies may be implemented in European Commission Decision 2006/771/EC [i.6], European
Commission Decision 2013/752/EU [i.7] and CEPT/ERC Recommendation 74-01 [i.8] in the future.
Table 1: Short Range Devices within the 40 GHz to 246 GHz frequency range
Frequency Bands Applications Notes
57 GHz to 64 GHz Non-specific SRD
61,0 GHz to 61,5 GHz Non-specific SRD
122 GHz to 123 GHz Non-specific SRD
244 GHz to 246 GHz Non-specific SRD
NOTE 2: In addition, it should be noted that other frequency bands may be available in a country within the
frequency range 40 GHz to 246 GHz covered by the present document. the CEPT/ERC Recommendation
70-03 [i.3] as implemented through National Radio Interfaces (NRI) and additional NRI as relevant.
NOTE 3: On non-harmonized parameter
...
Draft ETSI EN 305 550-2 V1.2.0 (2014-06)
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment to be used
in the 40 GHz to 246 GHz frequency range;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 305 550-2 V1.2.0 (2014-06)
Reference
REN/ERM-TG28-502
Keywords
Harmonized standard, radio, regulation, SRD,
testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 305 550-2 V1.2.0 (2014-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Spectral power density . 8
4.2.1.2 RF output power . 8
4.2.1.3 Permitted range of operating frequencies . 8
4.2.1.4 Out-of-band emissions . 8
4.2.1.5 Unwanted emissions in the spurious domain . 8
4.2.2 Receiver requirements . 8
4.2.2.1 Unwanted emissions. 8
5 Testing for compliance with technical requirements . 9
5.1 Description of testing for compliance with technical requirements . 9
5.1.1 Environmental conditions for testing . 9
5.1.1.1 Normal and extreme test-conditions. 9
5.1.1.2 Test power source . 9
5.1.2 Choice of samples for test suites . 9
5.2 Interpretation of the measurement results . 9
5.3 Essential transmitter test suites . 9
5.3.1 Spectral power density . 9
5.3.2 RF output power . 10
5.3.3 Permitted range of operation frequencies . 10
5.3.4 Out-of-band emissions . 10
5.3.5 Unwanted emissions in the spurious domain . 10
5.4 Essential receiver test suites . 10
5.4.1 unwanted radiated components . 10
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 11
Annex B (informative): Void . 13
Annex C (informative): Bibliography . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 305 550-2 V1.2.0 (2014-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document is a new standard that takes advantage of technical developments within the SRD industry. In
particular this includes the development in technologies which makes applications in the higher frequency range
possible.
The present document has been produced by ETSI in response to a mandate M/284 issued from the European
Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.9].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range,
as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 305 550-2 V1.2.0 (2014-06)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 305 550-2 V1.2.0 (2014-06)
1 Scope
The present document applies to the following Short Range Device major equipment types:
• Generic Short Range Devices, including alarms, telecommand, telemetry, data transmission in general, etc.
These radio equipment types are capable of operating in the frequency bands within the 40 GHz to 246 GHz range as
specified in table 1:
• either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
• for all types of modulation.
Table 1 shows a list of the frequency bands as designated in the CEPT/ERC Recommendation 70-03 [i.3] as known at
the date of publication of the present document.
NOTE 1: Table 1 represents the most widely implemented position within the CEPT countries [i.3], but it should
not be assumed that all designated bands are available in all countries. It is also foreseen that these
frequencies may be implemented in [i.6], [i.7] and [i.8] in the future.
Table 1: Short Range Devices within the 40 GHz to 246 GHz frequency range
Frequency Bands Applications Notes
57 GHz to 64 GHz Non-specific SRD
61,0 GHz to 61,5 GHz Non-specific SRD
122 GHz to 123 GHz Non-specific SRD
244 GHz to 246 GHz Non-specific SRD
NOTE 2: In addition, it should be noted that other frequency bands may be available in a country within the
frequency range 40 GHz to 246 GHz covered by the present document. the CEPT/ERC Recommendation
70-03 [i.3] as implemented through National Radio Interfaces (NRI) and additional NRI as relevant.
NOTE 3: On non-harmonized paramete
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.