Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive

REN/MSG-0006

Globalni sistem mobilnih komunikacij (GSM) - Harmonizirani EN za opremo za bazne postaje, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

Ta dokument se uporablja za radijsko opremo naslednje vrste: bazne postaje GSM. Ta dokument zajema določbe člena 3.2 Direktive 1999/5/ES [i.2] (direktive R&TTE), ki navaja, da »/.../ mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja.« Kar zadeva motnje sistemov, ki delujejo v sosednjih pasovih, so v Poročilo 146 Odbora za elektronske komunikacije [i.4] vključena navodila za enega ali več operaterjev baznih sprejemno-oddajnih postaj (BTS). Poleg tega dokumenta se za opremo na področju uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 direktive R&TTE [i.2].

General Information

Status
Published
Publication Date
11-Oct-2013
Technical Committee
Current Stage
12 - Completion
Due Date
16-Nov-2012
Completion Date
29-Nov-2012
Mandate

Buy Standard

Standard
EN 301 502 V10.2.1:2013
English language
122 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.7(Global System for Mobile communications (GSM) - Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 301 502 Version 10.2.1SIST EN 301 502 V10.2.1:2013en01-februar-2013SIST EN 301 502 V10.2.1:2013SLOVENSKI
STANDARD



SIST EN 301 502 V10.2.1:2013



ETSI EN 301 502 V10.2.1 (2012-11) Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive
Harmonized European Standard SIST EN 301 502 V10.2.1:2013



ETSI ETSI EN 301 502 V10.2.1 (2012-11) 2
Reference REN/MSG-0006 Keywords base station, cellular, GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2012. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 502 V10.2.1:2013



ETSI ETSI EN 301 502 V10.2.1 (2012-11) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 10 3 Definitions and abbreviations . 10 3.1 Definitions . 10 3.2 Abbreviations . 13 4 Technical requirements specifications . 14 4.1 Environmental profile . 14 4.2 Conformance requirements . 14 4.2.1 Modulation accuracy. 15 4.2.1.1 Definition . 15 4.2.1.2 Limit . 16 4.2.1.3 Conformance . 17 4.2.2 Mean transmitted RF carrier power . 17 4.2.2.1 Definition . 17 4.2.2.2 Limit . 17 4.2.2.3 Conformance . 18 4.2.3 Transmitted RF carrier power versus time . 18 4.2.3.1 Definition . 18 4.2.3.2 Limit . 18 4.2.3.3 Conformance . 22 4.2.4 Adjacent channel power . 22 4.2.4.1 Spectrum due to modulation and wideband noise . 22 4.2.4.1.1 Definition. 22 4.2.4.1.2 Limit . 22 4.2.4.1.3 Conformance . 24 4.2.4.2 Switching transients spectrum . 24 4.2.4.2.1 Definition. 24 4.2.4.2.2 Limit . 24 4.2.4.2.3 Conformance . 25 4.2.5 Spurious emissions from the transmitter antenna connector . 25 4.2.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band . 25 4.2.5.1.1 Definition. 25 4.2.5.1.2 Limit . 25 4.2.5.1.3 Conformance . 25 4.2.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit band . 25 4.2.5.2.1 Definition. 25 4.2.5.2.2 Limit . 25 4.2.5.2.3 Conformance . 26 4.2.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band . 26 4.2.5.3.1 Definition. 26 4.2.5.3.2 Limit . 27 4.2.5.3.3 Conformance . 27 4.2.6 Intermodulation attenuation . 27 4.2.6.1 Definition . 27 4.2.6.2 Limit . 27 SIST EN 301 502 V10.2.1:2013



ETSI ETSI EN 301 502 V10.2.1 (2012-11) 4 4.2.6.2.1 For BTS not belonging to the multicarrier BTS class. 27 4.2.6.2.2 For BTS belonging to the multicarrier BTS class . 27 4.2.6.3 Conformance . 28 4.2.7 Intra Base Station System intermodulation attenuation . 28 4.2.7.1 Definition . 28 4.2.7.2 Limit . 28 4.2.7.2.1 For BTS not belonging to the multicarrier BTS class. 28 4.2.7.2.2 For BTS belonging to the multicarrier BTS class . 28 4.2.7.3 Conformance . 28 4.2.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 29 4.2.8.1 Definition . 29 4.2.8.2 Limit . 29 4.2.9 Static Reference Sensitivity Level . 30 4.2.9.1 Definition . 30 4.2.9.2 Limit . 30 4.2.9.3 Conformance . 33 4.2.10 Multipath Reference Sensitivity Level . 33 4.2.10.1 Definition . 33 4.2.10.2 Limit . 33 4.2.10.3 Conformance . 42 4.2.11 Reference Interference Level . 42 4.2.11.1 Definition . 42 4.2.11.2 Limit . 42 4.2.11.3 Conformance . 57 4.2.12 Blocking Characteristics . 58 4.2.12.1 Definition . 58 4.2.12.2 Limit . 58 4.2.12.2.1 Blocking . 58 4.2.12.2.2 Spurious response . 59 4.2.12.3 Conformance . 59 4.2.13 Intermodulation characteristics . 59 4.2.13.1 Definition . 59 4.2.13.2 Limit . 59 4.2.13.3 Conformance . 59 4.2.14 AM suppression . 59 4.2.14.1 Definition . 59 4.2.14.2 Limit . 60 4.2.14.3 Conformance . 60 4.2.15 Spurious emissions from the receiver antenna connector . 60 4.2.15.1 Definition . 60 4.2.15.2 Limit . 60 4.2.15.3 Conformance . 60 4.2.16 Radiated spurious emissions . 60 4.2.16.1 Definition . 60 4.2.16.2 Limit . 61 4.2.16.3 Conformance . 61 5 Testing for compliance with technical requirements . 61 5.1 Environmental conditions for testing . 61 5.2 Interpretation of the measurement results . 61 5.3 Essential radio test suites . 62 5.3.1 Modulation accuracy. 63 5.3.1.1 Test case . 63 5.3.1.2 Test Environment . 64 5.3.2 Mean transmitted RF carrier power . 64 5.3.2.1 Test case . 64 5.3.2.2 Test Environment . 65 5.3.3 Transmitted RF carrier power versus time . 65 5.3.3.1 Test case . 65 5.3.3.2 Test Environment . 66 5.3.4 Adjacent channel power . 66 5.3.4.1 Spectrum due to modulation and wideband noise . 66 SIST EN 301 502 V10.2.1:2013



ETSI ETSI EN 301 502 V10.2.1 (2012-11) 5 5.3.4.1.1 Test case . 66 5.3.4.1.2 Test Environment . 67 5.3.4.2 Switching transients spectrum . 67 5.3.4.2.1 Test case . 67 5.3.4.2.2 Test Environment . 68 5.3.5 Spurious emissions from the transmitter antenna connector . 68 5.3.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band . 68 5.3.5.1.1 Test case . 68 5.3.5.1.2 Test Environment . 69 5.3.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit band . 69 5.3.5.2.1 For BTS not belonging to the multicarrier BTS class. 69 5.3.5.2.2 For BTS belonging to the multicarrier BTS class . 70 5.3.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band . 72 5.3.5.3.1 Test case . 72 5.3.5.3.2 Test Environment . 72 5.3.6 Intermodulation attenuation . 72 5.3.6.1 Test case . 72 5.3.6.2 Test Environment . 74 5.3.7 Intra Base Station System intermodulation attenuation . 74 5.3.7.1 Test case . 74 5.3.7.2 Test Environment . 75 5.3.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 75 5.3.8.1 Test case . 75 5.3.8.2 Test Environment . 77 5.3.9 Static reference sensitivity level . 78 5.3.9.1 Test case . 78 5.3.9.2 Test Environment . 80 5.3.10 Multipath Reference Sensitivity Level . 80 5.3.10.1 Test case . 80 5.3.10.2 Test Environment . 85 5.3.11 Reference Interference Level . 85 5.3.11.1 Test case . 85 5.3.11.2 Test Environment . 94 5.3.12 Blocking Characteristics . 95 5.3.12.1 Test case . 95 5.3.12.2 Test Environment . 99 5.3.13 Intermodulation characteristics . 99 5.3.13.1 Test case . 99 5.3.13.2 Test Environment . 101 5.3.14 AM suppression . 101 5.3.14.1 Test case . 101 5.3.14.2 Test Environment . 103 5.3.15 Spurious emissions from the receiver antenna connector . 103 5.3.15.1 Test case . 103 5.3.15.2 Test Environment . 104 5.3.16 Radiated spurious emissions . 104 5.3.16.1 Test case . 105 5.3.16.2 Test Environment . 107 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 108 Annex B (normative): General test conditions and declarations . 110 B.1 Declaration by manufacturer . 110 B.1.1 Output power and determination of power class . 110 B.1.2 Specified frequency range . 110 B.1.3 Frequency hopping . 111 B.1.4 RF power control . 111 SIST EN 301 502 V10.2.1:2013



ETSI ETSI EN 301 502 V10.2.1 (2012-11) 6 B.1.5 Downlink discontinuous transmission (DTX) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.