ETSI EN 301 489-6 V1.2.1 (2002-08)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment

REN/ERM-EMC-230-6

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 6. del: Posebni pogoji za opremo digitalnih izboljšanih brezvrvičnih telekomunikacij (DECT)

General Information

• Status: Published
• Publication Date: 06-Dec-2002
• Technical Committee: ERM WGEMC - ERM Electromagnetic Compatibility
• Current Stage: 12 - Completion
• Due Date: 04-Sep-2002
• Completion Date: 29-Aug-2002
• Mandate: M/284
• Mandate: T-353
• Ref Project: SIST EN 301 489-6 V1.2.1:2003 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment

Relations

• Official Journal Project Relation: ETSI EN 301 489-6 V1.1.1 (2000-09) - ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment
• Effective Date: 01-Dec-2009
• Official Journal Project Relation: ETSI EN 301 489-6 V1.3.1 (2008-08) - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment
• Effective Date: 06-Jan-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 489-6 V1.2.1:2003
01-marec-2003
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
6WDQGDUGHOHNWURPDJQHWQH]GUXåOMLYRVWL(0&]DUDGLMVNRRSUHPRLQVWRULWYH
GHO3RVHEQLSRJRML]DRSUHPRGLJLWDOQLKL]EROMãDQLKEUH]YUYLþQLKWHOHNRPXQLNDFLM
'(&7
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 6: Specific
conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment
Ta slovenski standard je istoveten z: EN 301 489-6 Version 1.2.1
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 489-6 V1.2.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 489-6 V1.2.1:2003

---------------------- Page: 2 ----------------------

SIST EN 301 489-6 V1.2.1:2003

ETSI EN 301 489-6 V1.2.1 (2002-08)
Candidate Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 6: Specific conditions for Digital Enhanced Cordless
Telecommunications (DECT) equipment

---------------------- Page: 3 ----------------------

SIST EN 301 489-6 V1.2.1:2003
 2 ETSI EN 301 489-6 V1.2.1 (2002-08)



Reference
REN/ERM-EMC-230-6
Keywords
DECT, EMC, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 489-6 V1.2.1:2003
 3 ETSI EN 301 489-6 V1.2.1 (2002-08)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Test conditions.6
4.1 General.6
4.2 Arrangements for test signals .7
4.2.1 Arrangements for test signals at the input of transmitters.7
4.2.1.1 Speech equipment.7
4.2.1.2 Non-speech equipment.7
4.2.2 Arrangements for test signals at the output of transmitters.7
4.2.3 Arrangements for test signals at the input of receivers .7
4.2.4 Arrangements for test signals at the output of receivers .7
4.2.5 Arrangements for testing transmitter and receiver together (as a system) .7
4.3 Exclusion bands.7
4.4 Narrow band responses on receivers or receivers which are part of transceivers.8
4.5 Normal test modulation.8
5 Performance assessment.8
5.1 General.8
5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.8
5.2.1 Alternative A: composite equipment .9
5.2.2 Alternative B: use of a test jig and three hosts.9
5.3 Assessment procedures.9
5.3.1 Loss of user control functions or stored user defined data.9
5.3.2 Audio breakthrough.9
5.4 Ancillary equipment.10
5.5 Equipment classification.11
6 Performance criteria.11
6.1 General.11
6.2 Performance criteria for Continuous phenomena of Transceivers (CT).11
6.3 Performance criteria for Transient phenomena applied to Transceivers (TT).12
6.4 Performance criteria for Continuous phenomena applied to Receive-only equipment (CR) .12
6.5 Performance criteria for Transient phenomena applied to Receive-only equipment (TR).12
6.6 Performance criteria for ancillary equipment tested on a stand alone basis .12
7 Applicability overview.12
7.1 Emission.12
7.1.1 General.12
7.1.2 Special conditions.13
7.2 Immunity.13
7.2.1 General.13
7.2.2 Special conditions.13
Annex A (normative): Definitions of cordless telecommunications equipment in the scope of
the present document.14
A.1 Digital Enhanced Cordless Telecommunications (DECT) equipment.14
History .15

ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 489-6 V1.2.1:2003
 4 ETSI EN 301 489-6 V1.2.1 (2002-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of
the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and
Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [2]).
The present document is part 6 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 9 August 2002
Date of latest announcement of this EN (doa): 30 November 2002
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 May 2003
Date of withdrawal of any conflicting National Standard (dow): 31 May 2004

ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 489-6 V1.2.1:2003
 5 ETSI EN 301 489-6 V1.2.1 (2002-08)
1 Scope
The present document, together with EN 301 489-1 [1], covers the assessment of Digital Enhanced Cordless
Telecommunications (DECT) equipment, and associated ancillary equipment, in respect of ElectroMagnetic
Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment.
Definitions of types of cordless telecommunications equipment covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any special conditions included in the present document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member
States relating to electromagnetic compatibility (EMC Directive).
[4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[5] ITU-T Recommendation O.153 (1988): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
[6] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[7] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) Layer".
[8] ETSI I-ETS 300 176: "Digital Enhanced Cordless Telecommunications (DECT); Approval test
specification".
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 489-6 V1.2.1:2003
 6 ETSI EN 301 489-6 V1.2.1 (2002-08)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the
following apply:
bearer: burst of the wanted RF signal used to establish and maintain the communications link for digital modulated and
operated cordless telephone and similar radio communications equipment
DECT equipment: Digital Enhanced Cordless Telecommunications apparatus which includes one or more transceivers
and/or receivers and/or parts thereof which conform to the requirements of EN 300 175-2
host equipment: any equipment which has a complete user functionality when not connected to the cordless telephone
or similar radio communications equipment, and to which this radio equipment provides additional functionality, and to
which connection is necessary for this radio equipment to offer functionality, and in which the transceiver part of the
radio equipment is physically installed
non-speech equipment: cordless telephone or similar communications equipment intended for the provision and
reception of digital data either originating from or destined to external digital speech processing circuitry or other
external equipment
speech equipment: cordless telephone or similar communications equipment containing transducers such as
microphones and/or loudspeakers intended for the provision and reception of acoustic audio signals
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
BER Bit Error Ratio
BPF Band Pass Filter
BW BandWidth
CF Carrier Frequency
CFP Cordless Fixed Part
CPP Cordless Portable Part
CR Continuous phenomena applied to cordless telephone or communication Receive-only equipment
CT Continuous phenomena applied to cordless telephone or communication Transceivers
DECT Digital Enhanced Cordless Telecommunications
ERP Ear Reference Point
MRP Mouth Reference Point
SPL Sound Pressure Level
TR Transient phenomena applied to cordless telephone or c
...