ETSI EN 300 019-2-2 V2.3.1 (2012-12)

Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-2: Specification of environmental tests; Transportation

REN/EE-01052

Okoljski inženiring (EE) - Okoljski pogoji in preskusi vplivov okolja na telekomunikacijsko opremo - 2-2. del: Specifikacija preskusov vplivov okolja - Prevoz

Ta dokument določa natančnost preskusov in metode za preverjanje zahtevane odpornosti opreme glede na ustrezen okoljski razred. Preskusi, opredeljeni v tem dokumentu, se uporabljajo za prevoz opreme, ki jo zajemajo okoljski pogoji iz standarda EN 300 019-1-2 [1].

General Information

• Status: Published
• Publication Date: 17-Apr-2013
• Technical Committee: EE 1 - EE Environmental Conditions
• Current Stage: 12 - Completion
• Due Date: 24-Apr-2013
• Completion Date: 18-Apr-2013
• Ref Project: SIST EN 300 019-2-2 V2.3.1:2013 - Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-2: Specification of environmental tests - Transportation

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 019-2-2 V2.3.1:2013
01-julij-2013
Okoljski inženiring (EE) - Okoljski pogoji in preskusi vplivov okolja na
telekomunikacijsko opremo - 2-2. del: Specifikacija preskusov vplivov okolja -
Prevoz
Environmental Engineering (EE) - Environmental conditions and environmental tests for
telecommunications equipment - Part 2-2: Specification of environmental tests -
Transportation
Ta slovenski standard je istoveten z: EN 300 019-2-2 Version 2.3.1
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 019-2-2 V2.3.1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013

---------------------- Page: 2 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
ETSI EN 300 019-2-2 V2.3.1 (2013-04)






European Standard
Environmental Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment;
Part 2-2: Specification of environmental tests;
Transportation

---------------------- Page: 3 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 2 ETSI EN 300 019-2-2 V2.3.1 (2013-04)



Reference
REN/EE-01052
Keywords
environment, testing, transport
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2013.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 3 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions . 6
4 Environmental test specifications . 7
4.1 Specification T 2.1: Very careful transportation . 7
4.2 Specification T 2.2: Careful transportation . 9
4.3 Specification T 2.3: Public transportation . 12
4.4 Notes to tables . 16
4.4.1 General note . 16
4.4.2 Notes to tables 1 to 6. 16
Annex A (informative): Bibliography . 19
History . 20

ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 4 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE).
The present document is part 2, sub-part 2 of a multi-part deliverable. Full details of the entire series can be found in
part 2, sub-part 0 [4].

National transposition dates
Date of adoption of this EN: 9 April 2013
Date of latest announcement of this EN (doa): 31 July 2013
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2014
Date of withdrawal of any conflicting National Standard (dow): 31 January 2014

ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 5 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
1 Scope
The present document specifies test severities and methods for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to transportation of equipment covering the environmental conditions
stated in EN 300 019-1-2 [1].
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 019-1-2: "Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-2: Classification of environmental
conditions; Transportation".
[2] IEC 60068-2-1 (03/2007): "Environmental testing, Part 2-1: Tests - Test A: Cold".
[3] ISO 4180:2009: "Packaging -- Complete, filled transport packages -- General rules for the
compilation of performance test schedules".
[4] ETSI EN 300 019-2-0: "Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 2-0: Specification of environmental
tests; Introduction".
[5] IEC 60068-2-2 (07/2007): "Environmental testing, Part 2-2: Tests - Test B: Dry heat".
[6] IEC 60068-2-14 (01/2009): "Environmental testing - Part 2-14: Tests - Test N: Change of
temperature".
[7] IEC 60068-2-78 (08/2001): "Environmental testing - Part 2-78: Tests - Test Cab: Damp heat,
steady state".
[8] IEC 60068-2-30 (08/2005): "Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)".
[9] IEC 60068-2-64 (04/2008): "Environmental testing - Part 2-64: Tests - Test Fh: Vibration,
broadband random and guidance".
[10] IEC 60068-2-27 (02/2008): "Environmental testing - Part 2-27: Tests - Test Ea and guidance:
Shock".
[11] IEC 60068-2-31 (05/2008): "Environmental testing - Part 2-31: Tests - Test Ec: Rough handling
shocks, primarily for equipment-type specimens".
[12] IEC 60068-2-18 (10/2000): "Environmental testing - Part 2-18: Tests - Test R and guidance:
Water".
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 6 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
[13] IEC 60068-2-68 (8/1994): "Environmental testing - Part 2: Tests - Test L: Dust and sand".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 300 019-1-0: "Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-0: Classification of environmental
conditions; Introduction".
3 Definitions
For the purposes of the present document, the terms and definitions given in EN 300 019-1-0 [i.1] apply.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 7 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
4 Environmental test specifications
The detailed descriptions of the environmental conditions are given in clauses 4 and 5 of EN 300 019-1-2 [1].
EN 300 019-2-0 [4] forms a general overview of the present document.
If the equipment is normally transported in a packed state then it shall be tested in its packaging.
4.1 Specification T 2.1: Very careful transportation
Specification T 2.1 applies to transportation by air and by road on good quality road surfaces where special care has been taken with respect to low temperatures, handling and
type of vehicle. See tables 1 and 2.
Table 1: Test specification T 2.1: Very careful transportation - climatic tests
Environmental
Environmental parameter Environmental test specification T 2.1: Very careful transportation
Class 2.1
Characteristic
Type Parameter Detail parameter Test severity Duration Reference Method Notes
Severity
low (°C) -25 -25 6 h IEC 60068-2-1 [2] Ab: Cold 1
unventilated (°C) +70 +70 6 h IEC 60068-2-2 [5] Bb: Dry heat
high
ventilated or outdoors (°C) +40 None
Air temperature
air/air (°C) -25/+30 -25/+30 5 cycles IEC 60068-2-14 [6] Nb: Change of
3a
(°C/min) 1,0 t1 = 3h temperature
change
air/water (°C) +40/+5 None  3b
slow temperature (%) 95 93 4 d IEC 60068-2-78 [7] Cab: Damp heat
4
change (°C) +40 +30 steady state
relative
rapid temperature (%) 95 90-100 2 cycles IEC 60068-2-30 [8] Db: Damp heat
Humidity 5
change (°C) -25/+30 +40 cyclic Variant 1
rapid temperature (°C) +70/+15 none

absolute 3
change (g/m ) 60
low (kPa) 70 none  6
pressure
Air change no
speed (m/s) 20 none  7
intensity (mm/min) 6 none  8
rain
low temperature (°C) no
Water
other sources (m/s) 1   7
wetness wet surfaces   9
2
solar (W/m) 1 120   10
Radiation
2
heat (W/m) 600   10
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 8 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
Environmental
Environmental parameter Environmental test specification T 2.1: Very careful transportation
Class 2.1
Characteristic
Type Parameter Detail parameter Test severity Duration Reference Method Notes
Severity
3
SO (mg/m ) 1,0 none
11
2
sulphur
3
HS (mg/m ) 0,5 none
11
2
salt sea and road salt none
11
mist
3
chlorine
Cl (mg/m ) no
11
Chemically 2
3
active HCI (mg/m) 0,5 none  11
3
substances
NO (mg/m ) 1,0 none
11
x
nitrogen
3
NH (mg/m ) 3,0 none
11
3
3
hydrogen (mg/m) 0,03 none
11
fluoride HF
3
ozone O
(mg/m) 0,1 none
11
3
2
Mechanically sedimentation (mg/(mh)) 3,0 none  12
dust
3
active suspension (mg/m) no
3
substances sand (mg/m) 100 none  12
Flora and micro organisms mould, fungus, etc. none  13
fauna rodents, insects rodents, etc. none  13
NOTE 1: no = this condition does not occur in this class.
NOTE 2: none = verification is required only in special cases.
NOTE 3: n = number of note, see clause 4.4.

Table 2: Test specification T 2.1: Very careful transportation - mechanical tests
Environmental
Environmental parameter Environmental test specification T 2.1: Very careful transportation
Class 2.1
Characteristic
Type Parameter Detail parameter Test severity Duration Reference Method Notes
Severity
displacement (mm) 3,5 none
2
acceleration (m/s ) 10 15
sinusoidal 14
frequency range (Hz) 2-9 9-200 200-500
axes of vibration
Vibration
2 3
ASD (m /s ) 1 0,3 1,0 IEC 60068-2-64 [9] Fh: Vibration,
(dB/oct)  -3 3 x 30 minutes broad-band random
random 15
frequency range (Hz) 10-200 200-2 000 5-20 20-200 (digital control)
axes of vibration 3
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 019-2-2 V2.3.1:2013
 9 ETSI EN 300 019-2-2 V2.3.1 (2013-04)
Environmental
Environmental parameter Environmental test specification T 2.1: Very careful transportation
Class 2.1
Characteristic
Type Parameter Detail parameter Test severity Duration Reference Method Notes
Severity
shock spectrum
duration (ms)
2
acceleration (m/s ) no
Shocks shocks
mass (kg)
number of shocks
direction of shocks
height (mm)
free fall mass (kg) no
Fall attitude
mass (kg) no
toppling around
edges
2
20 none
Acceleration steady state (m/s ) 19
Load static load (kPa) 5 none  20
rolling and angle (deg) no
Miscellaneous
pitching period (s)
NOTE 1: no = this condition does not occur in this class.
NOTE 2: none = verification is required only in special cases.
NOTE 3: n = number of note, see clause 4.4.

4.2 Specification T 2.2: Careful transportation
Specification T 2.2 applies to transportation by air, by road on good quality road surfaces, by ship and by train with specially designed shock-reducing buffers and where special
care has been taken with respect to low temperatures and handling. See tables 3, 4 and 7.
Table 3: Test specification T 2.2: Careful transportation - climatic tests
Environmental
Environmental parameter Environmental test specification T 2.2: Careful transportation
Class 2.2
Characteristic
Type Parameter Detail parameter Test severity Duration Reference Method
...