ETSI EN 302 729-2 V1.1.2 (2011-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
DEN/ERM-TGTLPR-0114-2
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Naprave kratkega dosega (SRD) - Oprema radarjev za ugotavljanje ravni tekočine (LPR), ki delujejo v frekvenčnih območjih od 6 GHz do 8,5 GHz, 24,05 GHz do 26,5 GHz, 57 GHz do 64 GHz in od 75 GHz do 85 GHz - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument določa zahteve za uporabe radarja za ugotavljanje ravni tekočine (LPR), zasnovanega na pulznem RF, FMCW ali podobnih širokopasovnih tehnikah.
Vrste radijske opreme LPR so zmožne delovati v vseh frekvenčnih pasovih ali katerem koli delu frekvenčnih pasov, kot so navedeni v preglednici 1.
Preglednica 1: Frekvenčni pasovi, namenjeni radarjem za ugotavljanje ravni tekočine (LPR)
Preglednica 1 prikazuje seznam frekvenčnih pasov, ki so namenjeni radarjem za ugotavljanje ravni tekočine v osnutku odločitve CEPT/ECC o pogojih za usklajeno postavitev industrijskih radarjev za ugotavljanje ravni tekočine (LPR) [i.3], znanih ob datumu objave tega dokumenta.
LPR se uporabljajo v mnogih industrijah, ki se ukvarjajo z nadzorom procesov za merjenje količine različnih snovi (predvsem tekočin ali granulatov). LPR se uporabljajo v širokem razponu kot sonadzor procesov, merjenje prenosa skrbništva (vladne pravne meritve), nadzor vode in drugih tekočin, preprečevanje politja in druge industrijske uporabe. Glavni nameni uporabe LPR so:
• povečati zanesljivost s preprečevanjem nesreč;
• povečati industrijsko učinkovitost, kakovost in nadzor procesov;
• izboljšati okoljske razmere in proizvodne procese.
LPR je vedno sestavljen iz kombiniranega oddajnika in sprejemnika in se uporablja z vgrajeno ali namensko anteno. LPR oprema je namenjena strokovnim uporabam, za katere sta inštalacijo in vzdrževanje izpeljejo samo strokovno usposobljeni posamezniki.
OPOMBA: LPR antene so vedno antene z določeno usmeritvijo in nikoli niso uporabljene omniusmerjene antene LPR. To je pomembno tudi zato, da se omeji osvetljeno območje, ter za nadzor in omejitev razprševanja, ki ga povzročajo robovi površine.
Področje uporabe je omejeno na LPR, ki delujejo kot naprava kratkega dosega.
Uporabe LPR v tem dokumentu niso predvidene za namene komunikacij.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 302 729-2 Version 1.1.2SIST EN 302 729-2 V1.1.2:2011en01-julij-2011SIST EN 302 729-2 V1.1.2:2011SLOVENSKI
STANDARD
SIST EN 302 729-2 V1.1.2:2011
ETSI EN 302 729-2 V1.1.2 (2011-05)Harmonized European Standard Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short Range Devices (SRD);Level Probing Radar (LPR) equipment operating in thefrequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz,57 GHz to 64 GHz, 75 GHz to 85 GHz;Part 2: Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive SIST EN 302 729-2 V1.1.2:2011
ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 2
Reference DEN/ERM-TGTLPR-0114-2 Keywords EHF, radar, regulation, SHF, short range, SRD, testing, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 729-2 V1.1.2:2011
ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Introduction . 4 1 Scope . 5 2 References . 5 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 6 3.1 Definitions . 6 3.2 Symbols . 6 3.3 Abbreviations . 6 4 Technical requirements specifications . 6 4.1 Environmental profile . 6 4.2 Conformance requirements . 7 4.2.1 Transmitter requirements . 7 4.2.1.1 Frequency band of operation . 7 4.2.1.2 Maximum value of mean power spectral density (within main beam) . 7 4.2.1.3 Maximum value of peak power . 7 4.2.1.4 LPR antenna characteristics . 7 4.2.1.5 Range of modulation parameters . 7 4.2.1.6 Other emissions . 7 4.2.1.7 Mitigation techniques . 7 5 Testing for compliance with technical requirements . 7 5.1 Environmental conditions for testing . 7 5.2 Interpretation of measurement results . 7 5.3 Conformance radio test suites . 8 5.3.1 Normal and extreme test-conditions . 8 5.3.2 Test power source . 8 5.3.3 Choice of samples for test suites . 8 5.3.4 Transmitter test suites . 8 5.3.4.1 Frequency band of operation . 8 5.3.4.2 Maximum value of mean power spectral density (within main beam) . 8 5.3.4.3 Maximum value of peak power . 8 5.3.4.4 LPR antenna characteristics . 8 5.3.4.5 Other emissions . 8 5.3.4.6 Mitigation techniques . 8 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 9 Annex B (informative): The EN title in the official languages . 11 History . 12
SIST EN 302 729-2 V1.1.2:2011
ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) [i.1] laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A. For non EEA countries the present document may be used for regulatory (type approval) purposes. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 9 May 2011 Date of latest announcement of this EN (doa): 31 August 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
29 February 2012 Date of withdrawal of any conflicting National Standard (dow): 28 February 2013
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.4]. SIST EN 302 729-2 V1.1.2:2011
ETSI ETSI EN 302 729-2 V1.1.2 (2011-05) 5 1 Scope The present document specifies the requirements for Level Probing Radar (LPR) applications based on pulse RF, FMCW, or similar wideband techniques. LPR radio equipment types are capable of operating in all or part of the frequency bands as specified in table 1. Table 1: Frequency bands designated to Level Probing Radars (LPR)
Frequency Bands/frequencies (GHz) Transmit and Receive 6 to 8,5
Transmit and Receive 24,05 to 26,5
Transmit and Receive 57 to 64 Transmit and Receive 75 to 85
Table 1 shows a list of the frequency bands as designated to Level Probing Radars in the draft CEPT ECC Decision on harmonised deployment conditions for industrial Level Probing Radars (LPR) [i
...
Final draft ETSI EN 302 729-2 V1.1.1 (2010-12)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Level Probing Radar (LPR) equipment operating in the
frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz,
57 GHz to 64 GHz, 75 GHz to 85 GHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 729-2 V1.1.1 (2010-12)
Reference
DEN/ERM-TGTLPR-0114-2
Keywords
EHF, radar, regulation, SHF, short range, SRD,
testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 729-2 V1.1.1 (2010-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Technical requirements specifications . 6
4.1 Environmental profile . 6
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Frequency band of operation . 7
4.2.1.2 Maximum value of mean power spectral density (within main beam) . 7
4.2.1.3 Maximum value of peak power . 7
4.2.1.4 LPR antenna characteristics . 7
4.2.1.5 Range of modulation parameters . 7
4.2.1.6 Other emissions . 7
4.2.1.7 Mitigation techniques . 7
5 Testing for compliance with technical requirements . 7
5.1 Environmental conditions for testing . 7
5.2 Interpretation of measurement results . 7
5.3 Conformance radio test suites . 8
5.3.1 Normal and extreme test-conditions . 8
5.3.2 Test power source . 8
5.3.3 Choice of samples for test suites . 8
5.3.4 Transmitter test suites . 8
5.3.4.1 Frequency band of operation . 8
5.3.4.2 Maximum value of mean power spectral density (within main beam) . 8
5.3.4.3 Maximum value of peak power . 8
5.3.4.4 LPR antenna characteristics . 8
5.3.4.5 Other emissions . 8
5.3.4.6 Mitigation techniques . 8
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 9
Annex B (informative): The EN title in the official languages . 11
History . 12
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 729-2 V1.1.1 (2010-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) [i.1] laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.2] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
For non EEA countries the present document may be used for regulatory (type approval) purposes.
The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A.
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges
6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 729-2 V1.1.1 (2010-12)
1 Scope
The present document specifies the requirements for Level Probing Radar (LPR) applications based on pulse RF,
FMCW, or similar wideband techniques.
LPR radio equipment types are capable of operating in all or part of the frequency bands as specified in table 1.
Table 1: Frequency bands designated to Level Probing Radars (LPR)
Frequency Bands/frequencies
(GHz)
Transmit and Receive 6 to 8,5
Transmit and Receive 24,05 to 26,5
Transmit and Receive 57 to 64
Transmit and Receive 75 to 85
Table 1 shows a list of the frequency bands as designated to Level Probing Radars in the draft CEPT ECC Decision on
harmonised deployment conditions for industrial Level Probing Radars (LPR) [i.3] as known at the date of publication
of the present document.
LPRs are used in many industries concerned with process control to measure the amount of various substances (mostly
liquids or granulates). LPRs are used for a wide range of applications such as process control, custody transfer
measurement (government legal measurements), water and other liquid monitoring, spilling prevention and other
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.