ETSI EN 301 489-22 V1.3.1 (2003-11)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment

REN/ERM-EMC-236-22

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 22. del: Posebne zahteve za talno mobilno in fiksno letalniško (aeronavtično) radijsko opremo VHF

General Information

• Status: Published
• Publication Date: 29-Apr-2004
• Technical Committee: ERM WGEMC - ERM Electromagnetic Compatibility
• Current Stage: 12 - Completion
• Due Date: 05-Dec-2003
• Completion Date: 24-Nov-2003
• Mandate: M/284
• Mandate: T-353
• Ref Project: SIST EN 301 489-22 V1.3.1:2004 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 489-22 V1.3.1:2004
01-julij-2004
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
6WDQGDUGHOHNWURPDJQHWQH]GUXåOMLYRVWL(0&]DUDGLMVNRRSUHPRLQVWRULWYH
GHO3RVHEQH]DKWHYH]DWDOQRPRELOQRLQILNVQROHWDOQLãNRDHURQDYWLþQRUDGLMVNR
RSUHPR9+)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 22: Specific
conditions for ground based VHF aeronautical mobile and fixed radio equipment
Ta slovenski standard je istoveten z: EN 301 489-22 Version 1.3.1
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 489-22 V1.3.1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 489-22 V1.3.1:2004

---------------------- Page: 2 ----------------------

SIST EN 301 489-22 V1.3.1:2004

ETSI EN 301 489-22 V1.3.1 (2003-11)
Candidate Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 22: Specific conditions for ground based VHF
aeronautical mobile and fixed radio equipment

---------------------- Page: 3 ----------------------

SIST EN 301 489-22 V1.3.1:2004
 2 ETSI EN 301 489-22 V1.3.1 (2003-11)



Reference
REN/ERM-EMC-236-22
Keywords
aeronautical, EMC, radio, regulation, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
T he present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2003.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 489-22 V1.3.1:2004
 3 ETSI EN 301 489-22 V1.3.1 (2003-11)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
3 Definitions and abbreviations.6
3.1 Definitions.6
3.2 Abbreviations.6
4 Test conditions.7
4.1 General.7
4.2 Arrangements for test signals .7
4.2.1 Arrangement for test signals at the input to the transmitter .7
4.2.2 Arrangements for test signals at the output from the transmitter.7
4.2.3 Arrangements for test signals at the input to the receiver.7
4.2.4 Arrangements for test signals at the output from the receiver .7
4.2.5 Arrangements for testing transmitters and receivers together (as a system) .7
4.3 RF exclusion band for radio communications equipment .8
4.3.1 Transmitter exclusion bands for EM emission measurements.8
4.3.2 Receiver exclusion bands for EM emission measurements .8
4.3.3 Transmitter exclusion bands for immunity tests .8
4.3.4 Receiver exclusion bands for immunity tests .8
4.4 Narrow band responses of receivers.8
4.5 Normal test modulation.9
5 Performance assessment.9
5.1 General.9
5.2 Equipment which can provide a continuous communications link .9
5.3 Equipment which does not provide a continuous or duty cycle communications link.10
5.4 Ancillary equipment.10
5.5 Equipment classification.10
6 Performance criteria.10
6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers.11
6.2 Performance criteria B for transient phenomena applied to transmitters and receivers .11
6.3 Performance criteria C for immunity tests with power interruptions .11
6.4 Performance criteria for equipment which does not provide a continuous or duty cycle communications
link.12
6.5 Performance criteria for ancillary equipment tested on a stand alone basis .12
7 Applicability overview.12
7.1 Emission.12
7.1.1 General.12
7.1.2 Special conditions.12
7.2 Immunity.12
7.2.1 General.12
7.2.2 Special conditions.13
Annex A (normative): Definitions of ground based aeronautical radio communications equipment
in the scope of the present document.14
A.1 Ground based aeronautical VHF radio communications equipment.14
A.2 Ground based aeronautical VDL Mode 2 and VDL Mode 4 radio communications equipment .14
History .15

ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 489-22 V1.3.1:2004
 4 ETSI EN 301 489-22 V1.3.1 (2003-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [7] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of
the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and
Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [2]).
The present document is part 22 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 21 November 2003
Date of latest announcement of this EN (doa): 29 February 2004
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2004
Date of withdrawal of any conflicting National Standard (dow): 28 February 2007

ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 489-22 V1.3.1:2004
 5 ETSI EN 301 489-22 V1.3.1 (2003-11)
1 Scope
The present document, together with EN 301 489-1 [1] covers the assessment of ground base station, ground mobile
and hand-held/portable aeronautical VHF radio communications and associated ancillary equipment, in respect of
ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment
covered in this scope, are not included in the present document. Such technical specifications are found in the relevant
product standards for the effective use of the radio spectrum.
The present document also covers EMC requirements for VDL Mode 2 and VDL Mode 4 ground base station radio
equipment.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
ground based aeronautical radio equipment and associated ancillary equipment.
Definitions of types of ground base station, ground mobile and hand held/portable aeronautical VHF radio
communications covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any specific conditions included in the present document. The applicable
environments referred to in EN 301 489-1 [1] where equipment covered by the scope of the present document may be
used, shall be declared by the manufacturer.
The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus within aerodrome,
en route, vehicular and hand held/portable operational environments. The levels, however, do not cover extreme cases
which may occur in any location but with a low probability of occurrence.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member
States relating to electromagnetic compatibility (EMC Directive).
[4] ETSI EN 300 676 (V1.3.1): "ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);
Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for
the VHF aeronautical mobile service using amplitude modulation; Technical characteristics and
methods of measurement".
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 489-22 V1.3.1:2004
 6 ETSI EN 301 489-22 V1.3.1 (2003-11)
[5] ITU Radio Regulations (1998).
[6] ITU-T Recommendation P.53: "Psophometer for use on telephone-type circuits".
[7] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the
following apply:
base station: aeronautical radio equipment, used in the aeronautical mobile service, for use with an external antenna
and intended for use at a fixed location
centre frequency (Fc): centre of the transmitter necessary bandwidth
integral antenna equipment: radio communications equipment with an antenna integrated into the equipment without
the use of an external connector and considered to be part of the equipment
NOTE: An integral antenna may be internal or external to the equipment. In equipment of this type, a 50 Ω RF
connection point shall be provided for test purposes.
necessary bandwidth: for a given class of emission, the width of the frequency band which is just sufficient to ensure
the transmission of information at the rate and with the quality required under specified conditions (ITU Radio
Regulations, clause 146)
occupied bandwidth: width of a frequency band such that, below the lower and above the upper frequency limits, the
mean powers emitted are each equal to a specified percentage ß/2 of the total mean power of a given emission
NOTE: Unless otherwise specified by ITU-R for the appropriate class of emission, the value of ß/2 should be
taken as 0,5 % (ITU Radio Regulations [5]).
simplex: instantaneous one-way communications link
product standard: functional standard describing frequency management parameters of radio product
operating frequency range: range(s) of continuous radio frequencies covered by the Equipment Under Test (EUT)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Alternating Current
AM Amplitude Modulation
BER Bit Error Ratio
BW BandWidth
D8PSK Differentially encoded 8 Phase Shift Keying
DC Direct Current
DSB Double Side Band full carrier
EM ElectroMagnetic
EMC ElectroMagnetic Compatibility
EUT Equipment Under Test
Fc centre frequency
GFSK Gaussian Frequency Shift Keying
PEP Peak Envelope Power
RF Radio Frequency
rms root mean of squares
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 489-22 V1.3.1:2004
 7
...