ETSI EN 301 526 V1.1.1 (2006-07)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum mobile stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive

DEN/ERM-TG39-002

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Harmonizirani EN za mobilne postaje, delujoče po standardu CDMA na razpršenem spektru v mobilnem pasu 450 MHz (CDMA 450) ter pasovih PAMR 410, 450 in 870 MHz (CDMA-PAMR), ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

• Status: Published
• Publication Date: 20-Dec-2006
• Technical Committee: ERM TG39 - Code Division Multiple Access (CDMA)
• Current Stage: 12 - Completion
• Due Date: 28-Jul-2006
• Completion Date: 20-Jul-2006
• Ref Project: SIST EN 301 526 V1.1.1:2006 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum mobile stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 526 V1.1.1:2006
01-oktober-2006
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50±
+DUPRQL]LUDQL(1]DPRELOQHSRVWDMHGHOXMRþHSRVWDQGDUGX&'0$QDUD]SUãHQHP
LQVSHNWUXYPRELOQHPSDVX0+]&'0$WHUSDVRYLK3$05
0+]&'0$3$05NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for
CDMA spread spectrum mobile stations operating in the 450 MHz cellular band (CDMA
450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential
requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 526 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 526 V1.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 526 V1.1.1:2006

---------------------- Page: 2 ----------------------

SIST EN 301 526 V1.1.1:2006

ETSI EN 301 526 V1.1.1 (2006-07)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Harmonized EN for CDMA spread spectrum mobile stations
operating in the 450 MHz cellular band (CDMA 450)
and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR)
covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 301 526 V1.1.1:2006
 2 ETSI EN 301 526 V1.1.1 (2006-07)



Reference
DEN/ERM-TG39-002
Keywords
cellular, digital, CDMA, mobile, radio, regulation,
terminal
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2006.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 526 V1.1.1:2006
 3 ETSI EN 301 526 V1.1.1 (2006-07)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.9
2 References.9
3 Definitions, symbols and abbreviations .10
3.1 Definitions.10
3.2 Symbols.15
3.3 Abbreviations.16
4 Technical requirements specifications.16
4.1 Environmental profile.16
4.2 Conformance requirements.17
4.2.1 Introduction.17
4.2.2 Transmitter conducted unwanted emissions .17
4.2.2.1 Definition.17
4.2.2.2 Limits.17
4.2.2.2.1 Limits for band class 5 mobile stations .17
4.2.2.2.2 Limits for band classes 11 and 12 mobile stations .18
4.2.2.3 Conformance.18
4.2.3 Maximum RF output power.18
4.2.3.1 Definition.18
4.2.3.2 Limits.18
4.2.3.2.1 Limits for Band Classes 5 and 11 mobile stations.19
4.2.3.2.2 Limits for Band Class 12 mobile stations.19
4.2.3.3 Conformance.19
4.2.4 Radiated spurious unwanted emissions.19
4.2.4.1 Definition.19
4.2.4.2 Limits.19
4.2.4.3 Conformance.20
4.2.5 Minimum controlled output power .20
4.2.5.1 Definition.20
4.2.5.2 Limits.20
4.2.5.3 Conformance.20
4.2.6 Control and monitoring function .20
4.2.6.1 Definition.20
4.2.6.2 Limits.20
4.2.6.3 Conformance.20
4.2.7 Supervision of Paging Channel or Forward Common Control Channel.21
4.2.7.1 Definition.21
4.2.7.2 Limits.21
4.2.7.3 Conformance.21
4.2.8 Supervision of Forward Traffic Channel .21
4.2.8.1 Definition.21
4.2.8.2 Limits.21
4.2.8.3 Conformance.22
4.2.9 Supervision of Control Channel.22
4.2.9.1 Definition.22
4.2.9.2 Limits.22
4.2.9.3 Conformance.22
4.2.10 Supervision procedures in Variable Rate State.23
4.2.10.1 Definition.23
4.2.10.2 Limits.23
4.2.10.3 Conformance.23
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 526 V1.1.1:2006
 4 ETSI EN 301 526 V1.1.1 (2006-07)
4.2.11 Receiver single tone desensitization .23
4.2.11.1 Definition.23
4.2.11.2 Limits.24
4.2.11.2.1 Mobile station operating in 1x systems .24
4.2.11.2.2 Mobile station operating in HRPD systems.24
4.2.11.3 Conformance.24
4.2.12 Intermodulation spurious response attenuation.24
4.2.12.1 Definition.24
4.2.12.2 Limits.24
4.2.12.2.1 Mobile station operating in 1x systems .24
4.2.12.2.2 Mobile station operating in HRPD systems.24
4.2.12.3 Conformance.24
4.2.13 Conducted spurious emissions when not transmitting .24
4.2.13.1 Definition.24
4.2.13.2 Limits.25
4.2.13.3 Conformance.25
5 Testing for compliance with technical requirements.25
5.1 Conditions for testing .25
5.1.1 Introduction.25
5.1.2 Standard equipment under test.25
5.1.2.1 Basic equipment.25
5.1.2.2 Ancillary equipment.25
5.2 Interpretation of the measurement results .26
5.3 Essential radio test suites.27
5.3.1 Conducted unwanted emissions when transmitting .27
5.3.1.1 Test procedure for mobile stations supporting operation in 1x systems.27
5.3.1.2 Test procedure for mobile stations supporting operation in HRPD systems.27
5.3.2 Maximum RF output power.27
5.3.2.1 Test procedure for mobile stations supporting operation in 1x systems.27
5.3.2.2 Test procedure for mobile stations supporting operation in HRPD systems.28
5.3.3 Radiated unwanted emissions.28
5.3.3.1 Test method.28
5.3.3.2 Test configurations.29
5.3.4 Minimum controlled output power .29
5.3.4.1 Test procedure for mobile stations supporting operation in 1x systems.29
5.3.4.2 Test procedure for mobile stations supporting operation in HRPD systems.29
5.3.5 Control and monitoring functions.30
5.3.5.1 Test method.30
5.3.6 Supervision of Paging Channel or Forward Common Control Channel.30
5.3.7 Supervision of Forward Traffic Channel .30
5.3.8 Supervision of Control Channel.30
5.3.9 Supervision procedures in variable rate state.31
5.3.10 Single tone desensitization.31
5.3.10.1 Test procedure for mobile stations supporting operation in 1x systems.31
5.3.10.2 Test procedure for mobile stations supporting operation in HRPD systems.31
5.3.11 Intermodulation spurious response attenuation.31
5.3.11.1 Test procedure for mobile stations supporting operation in 1x systems.31
5.3.11.2 Test procedure for mobile stations supporting operation in HRPD systems.31
5.3.12 Conducted spurious emissions when not transmitting .32
5.3.12.1 Test procedure for mobile stations supporting operation in 1x systems.32
5.3.12.2 Test procedure for mobile stations supporting operation in HRPD systems.32
Annex A (normative): The HS Requirements and conformance Test specifications Table
(HS-RTT).33
Annex B (normative): Mobile station configurations .36
B.1 Receiver diversity.36
Annex C (informative): Environmental profile specification .37
C.1 Test conditions, power supply and ambient temperatures.37
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 526 V1.1.1:2006
 5 ETSI EN 301 526 V1.1.1 (2006-07)
C.1.1 Normal and extreme test conditions .37
C.1.2 Power sources.37
C.1.2.1 Power sources for stand-alone equipment .37
C.1.3 Normal test conditions.37
C.1.3.1 Normal temperature and humidity.37
C.1.3.2 Normal power source.38
C.1.3.2.1 Mains voltage.38
C.1.3.2.2 Lead-acid battery power sources used on vehicles.38
C.1.3.2.3 Other power sources.38
C.1.4 Extreme test conditions .38
C.1.4.1 Extreme temperatures.38
C.1.4.2 Extreme power source voltages .38
C.1.4.2.1 Mains voltage.38
C.1.4.2.2 Power sources using other types of batteries.38
C.1.4.2.3 Other power sources.39
C.1.4.3 Procedure for tests at extreme temperatures .39
C.2 Declared Environmental Operating conditions of equipment .39
Annex D (informative): Bibliography.40
Annex E (informative): The EN title in the official languages .41
History .43

ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 526 V1.1.1:2006
 6 ETSI EN 301 526 V1.1.1 (2006-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").

National transposition dates
Date of adoption of this EN: 14 July 2006
Date of latest announcement of this EN (doa): 31 October 2006
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2007
Date of withdrawal of any conflicting National Standard (dow): 30 April 2008

ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 526 V1.1.1:2006
 7 ETSI EN 301 526 V1.1.1 (2006-07)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure.
The modular structure is shown in figure 1.

Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Inter-working via the network*
equipment
3.3a class or type
Inter-working with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
EN 301 489 multi-part EMC standard
3.1b
EMC
Generic and product standards also notified under EMC Directive
- If needed, new standards for human exposure to
Electromagnetic Fields,
- if needed, new standards for acoustic safety
3.1a
Standards also notified under LV Directive
Safety
Non-radio Radio (RE)
TTE Non-TTE

Figure 1: Modular structure for the various standards used under the R&TTE Directive [1]
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 526 V1.1.1:2006
 8 ETSI EN 301 526 V1.1.1 (2006-07)
The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [1].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present
document essential requirements in these areas have to be adopted by the Commission. If such essential requirements
are adopted and as far and as long as they are applicable, they will justify individual standards whose scope is likely to
be specified by function or interface type.
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The
scopes of these standards are specified either by frequency (normally in the case where frequency bands are
harmonized) or by radio equipment type.
For article 3.1b, figure 1 shows EN 301 489 [6], the multi-part product EMC standard for radio used under the
EMC Directive [2].
For article 3.1a, figure 1 shows the existing safety standards currently used under the LV Directive [3] and new
standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be
required.
The bottom of figure 1 shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. Particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio
spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant
essential requirement under the R&TTE Directive [1] is adopted by the Commission and if the equipment in question is
covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the essential
requirements under the R&TTE Directive [1] may be covered in a set of standards.
The modularity principle has been taken because:
• It minimizes the number of standards needed. Because equipment may, in fact, have multiple interfaces and
functions it is not practicable to produce a single standard for each possible combination of functions that may
occur in equipment.
• It provides scope for standards to be added:
- under article 3.2 when new frequency bands are agreed; or
- under article 3.3 should the Commission take the necessary decisions;
without requiring alteration of standards that are already published.
• It clarifies, simplifies and promotes the usage of Harmonized Standards as the relevant means of conformity
assessment.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 301 526 V1.1.1:2006
 9 ETSI EN 301 526 V1.1.1 (2006-07)
1 Scope
The present document applies to cdma450 mobile stations using CDMA 1x spread spectrum technology,
i.e. Band Class 5 equipment or Band Class 11
...