Digital Video Broadcasting (DVB); Framing structure, channel coding and modulation for cable systems

DE/JTC-DVB-7

Sistemi digitalne radiodifuzije za televizijske, zvokovne in podatkovne storitve – Struktura okvirov, kodiranje kanalov in modulacija za kabelske sisteme

General Information

Status
Published
Publication Date
14-Dec-1994
Current Stage
12 - Completion
Due Date
28-Dec-1994
Completion Date
15-Dec-1994
Mandate

Buy Standard

Standard
ETS 300 429 E1:2003
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 429 E1:2003
01-december-2003
Sistemi digitalne radiodifuzije za televizijske, zvokovne in podatkovne storitve –
Struktura okvirov, kodiranje kanalov in modulacija za kabelske sisteme
Digital Video Broadcasting (DVB); Framing structure, channel coding and modulation for
cable systems
Ta slovenski standard je istoveten z: ETS 300 429 Edition 1
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
SIST ETS 300 429 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 429 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 429 E1:2003
EUROPEAN ETS 300 429
TELECOMMUNICATION December 1994
STANDARD
Source:EBU/ETSI JTC Reference:DE/JTC-DVB-7
ICS: 33.160.20, 33.160.40
Key words: Digital television broadcasting by cable, modulation, channel coding
European Broadcasting Union Union Européenne de Radio-Télévision
Digital broadcasting systems for television,
sound and data services;
Framing structure, channel coding and modulation
for cable systems
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification:
No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1994.
© European Broadcasting Union
All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 429 E1:2003
Page 2
ETS 300 429: December 1994
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 429 E1:2003
Page 3
ETS 300 429: December 1994
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Symbols and abbreviations .7
3.1 Symbols .7
3.2 Abbreviations .8
4 Cable System concept .8
1)
4.1 Baseband interfacing and sync.10
4.2 Sync 1 inversion and randomization .10
4.3 Reed-Solomon (RS) coder .10
4.4 Convolutional interleaver .10
4.5 Byte to m-tuple conversion .10
4.6 Differential encoding .10
4.7 Baseband shaping .10
4.8 QAM modulation and physical interface .10
4.9 Cable receiver.10
5 MPEG-2 transport layer.10
6 Framing structure .10
7 Channel coding .11
7.1 Randomization for spectrum shaping .11
7.2 Reed-Solomon coding .12
7.3 Convolutional interleaving.13
8 Byte to symbol mapping .14
9 Modulation.15
Annex A (normative): Baseband filter characteristics .18
Annex B (informative): Transparency of cable networks .19
Annex C (informative): Bibliography.20
History.21

---------------------- Page: 5 ----------------------

SIST ETS 300 429 E1:2003
Page 4
ETS 300 429: December 1994
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 429 E1:2003
Page 5
ETS 300 429: December 1994
Foreword
This European Telecommunication Standard (ETS) has been produced under the authority of the Joint
Technical Committee (JTC) of the European Broadcasting Union (EBU) and the European
Telecommunications Standards Institute (ETSI).
NOTE: The EBU/ETSI JTC was established in 1990 to co-ordinate the drafting of ETS in the
specific field of radio, television and data broadcasting.
The EBU is a professional association of broadcasting organisations whose work
includes the co-ordination of its Members' activities in the technical, legal, programme-
making and programme-exchange domains. The EBU has Active Members in about
60 countries in the European Broadcasting Area; its headquarters is in Geneva *.
* European Broadcasting Union
Case Postale 67
CH-1218 GRAND SACONNEX (Geneva)
Switzerland
Tel: +41 22 717 21 11
Fax: +41 22 717 24 81
This ETS describes framing structure, channel coding and modulation for digital multi-programme
television by cable, it has been prepared by the Project Team PT-55V. The work of the Project Team was
based on the studies carried out by the European Digital Video Broadcasting (DVB) Project under the
auspices of Ad hoc Group for Digital Television by Cable (DTVC). This joint group of industry, cable
operators and broadcasters provided the necessary information on all relevant matters to the Project
Team, see DTVB 1190/DTVC 38 (bibliography).
This ETS is Part of the complete "Multivision system" (this name is currently under review) which covers
the baseband image coding, baseband sound coding, baseband data service coding, multiplexing,
channel coding and modulation for satellite services, channel coding and modulation for cable and
Satellite Master Antenna Television (SMATV) distribution and common scrambling system.

---------------------- Page: 7 ----------------------

SIST ETS 300 429 E1:2003
Page 6
ETS 300 429: December 1994
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 429 E1:2003
Page 7
ETS 300 429: December 1994
1 Scope
This European Telecommunication Standard (ETS) describes the framing structure, channel coding and
modulation (denoted "the System" for the purposes of this ETS) for a digital multi-programme television
distribution by cable. The aim of this ETS is to present a harmonized transmission standard for cable and
satellite, based on the MPEG-2 System Layer ISO/IEC DIS 13818-1 [1], with the addition of appropriate
Forward Error Correction (FEC) technique. This System can be used transparently with the
modulation/channel coding system used for digital multi-programme television by satellite, see ETS 300
421 (bibliography). The System allows for further evolution as technology advances as described in
Reimers document (see bibliography). It is capable of starting a reliable service as of now. The System is
based on Quadrature Amplitude Modulation (QAM). It allows for 16, 32, or 64-QAM constellations and
permits for future extension to higher constellations, such as 128-QAM and 256-QAM.
-4 -10 -11
The System FEC is designed to improve Bit Error Ratio (BER) from 10 to a range, 10 to 10 ,
ensuring "Quasi Error Free" (QEF) operation with approximately one uncorrected error event per
transmission hour.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ISO/IEC DIS 13818-1 (June 1994): "Coding of moving pictures and associated
audio".
[2] IEEE Trans. Comm. Tech., COM-19, pp. 772-781, (October 1971) Forney, G.D.:
"Burst-correcting codes for the classic bursty channel".
3 Symbols and abbreviations
3.1 Symbols
For the purposes of this ETS, the following symbols apply:
α Roll-off factor
A , B Most Significant Bits at the output of the Byte to m-tuple converter
k k
f Channel centre frequency
0
f Nyquist frequency
N
g(x) RS code generator polynomial
HEX Hexadecimal
I Interleaving depth (bytes)
I, Q In-phase, Quadrature phase components of the modulated signal
j Branch index
k Number of bytes mapped into n symbols
m
m Power of 2 -level QAM: 4,5,6 for 16-QAM, 32-QAM, 64-QAM, respectively
M Convolutional interleaver branch depth for j = 1, M = N/I
n Number of symbols mapped from k bytes
N Error protected frame length [bytes]
p(x) RS field generator polynomial
r In-band ripple (dB)
m
R Randomized sequence
R Symbol rate corresponding to the bilateral Nyquist bandwidth of the modulated
s
signal
R Useful bit rate after MPEG-2 transport multiplexer
u
R Bit rate after RS outer coder
u'
q Number of bits: 2,3,4 for 16-QAM, 32-QAM, 64-QAM, respectively
T Number of bytes which can be corrected in RS error protected packet
T Symbol period
s

---------------------- Page: 9 ----------------------

SIST ETS 300 429 E1:2003
Page 8
ETS 300 429: December 1994
3.2 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
BB Baseband
BER Bit Error Ratio
DTVC Digital Television by Cable
EBU European Broadcasting Union
ETS European Telecommunication Standard
FEC Forward Error Correction
FIFO First In First Out
IF Intermediate Frequency
IRD Integrated Receiver Decoder
LSB Least Significant Bit
MPEG Moving Pictures Experts Group
MSB Most Significant Bit
MUX Multiplex
PDH Plesiochronous Digital Hierarchy
PRBS Pseudo Random Binary Sequence
QAM Quadrature Amplitude Modulation
QEF Quasi Error Free
RF Radio Frequency
RS Reed-Solomon
SMATV Satellite Master Antenna Television
TDM Time Division Multiplex
TV Television
4 Cable System concept
The cable System shall be defined as the functional block of equipment performing the adaptation of the
baseband TV signals to the cable channel characteristics (see figure 1). In the cable head-end, the
following TV baseband signal sources can be considered:
- satellite signal(s);
- contribution link(s);
- local program source(s).
The processes in the following subclauses shall be applied as shown in figure 1.

---------------------- Page: 10 ----------------------

SIST ETS 300 429 E1:2003
Page 9
ETS 300 429: December 1994
Figure 1: Conceptual block diagram of elements at the cable head-end and receiving site
C able H ead-end
To RF
Cable
*
data
Channel
QAM
BB Sync1
I
Reed- Convol.
Modulator
Inversion Byte
88 8 m m
Solomon Inter-
Differential &
& To Baseband
Physical
leaver
IF
Random i- m-tuple Encoding shaping
clock
Coder
Interface
Conversion Physical
zation Q
I=12 bytes
Interface
(204,188)
Clock & Sync Generator
*
MPEG-2 transport Mux packets
Cable IR D
*
data
RF I
Sync1
Physical
Matched Symbol BB
Inversion
m
Interface m8 Convol.8 Reed-8 8
Filter To
Differential &
&
& Byte Deinter- Solomon Physical
Decoder
Energy
From RF QAM leaver Decoder
Q Equalizer Mapping Interface
clock
dispersal
cable channel Demod.
Removal
Carrier & Clock & Sync
Recovery

---------------------- Page: 11 ----------------------

SIST ETS 300 429 E1:2003
Page 10
ETS 300 429: December 1994
1)
4.1 Baseband interfacing and sync
This unit shall adapt the data structure to the format of the signal source.The framing structure shall be in
accordance with MPEG-2 transport layer including sync bytes.
4.2 Sync 1 inversion and randomization
This unit shall invert the Sync 1 byte according to the MPEG-2 framing structure, and randomizes the data
stream for spectrum shaping purposes.
4.3 Reed-Solomon (RS) coder
This unit shall apply a shortened Reed-Solomon (RS) code to each randomized transport packet to
generate an error-protected packet. This code shall also be applied to the Sync byte itself.
4.4 Convolutional interleaver
This unit shall perform a depth I = 12 convolutional interleaving of the error-protected packets. The
periodicity of the sync bytes shall remain unchanged.
4.5 Byte to m-tuple conversion
This unit shall perform a conversion of the bytes generated by the interleaver into QAM symbols.
4.6 Differential encoding
In order to get a rotation-invariant constellation, this unit shall apply a differential encoding of the two Most
Significant Bits (MSBs) of each symbol.
4.7 Baseband shaping
This unit performs mapping from differentially encoded m-tuples to I and Q signals and a square-root
raised cosine filtering of the I and Q signals prior to QAM modulation.
4.8 QAM modulation and physical interface
This unit performs QAM modulation. It is followed by interfacing the QAM modulated signal to the Radio
Frequency (RF) cable channel.
4.9 Cable receiver
A System receiver shall perform the inverse sign
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.