ETSI EN 300 162-3 V1.1.1 (2001-05)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive

DEN/ERM-RP01-046-3

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Radiotelefonski oddajniki in sprejemniki za pomorske mobilne storitve, ki delujejo v pasovih VHF - 3. del: Harmonizirani evropski standard (EN), ki zajema bistvene zahteve člena 3.3.e direktive o radijski in telekomunikacijski terminalski opremi (R&TTE)

General Information

• Status: Published
• Publication Date: 25-Jul-2001
• Technical Committee: ERM RP01 - Maritime Radio
• Current Stage: 12 - Completion
• Due Date: 04-May-2001
• Completion Date: 11-May-2001
• Mandate: M/284
• Ref Project: SIST EN 300 162-3:2001 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive

Relations

• Official Journal Project Relation: ETSI EN 300 162-3 V1.2.1 (2006-12) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive
• Effective Date: 17-Nov-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 162-3:2001
01-december-2001
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
5DGLRWHOHIRQVNLRGGDMQLNLLQVSUHMHPQLNL]DSRPRUVNHPRELOQHVWRULWYHNLGHOXMHMR
YSDVRYLK9+)GHO+DUPRQL]LUDQLHYURSVNLVWDQGDUG(1NL]DMHPDELVWYHQH
]DKWHYHþOHQDHGLUHNWLYHRUDGLMVNLLQWHOHNRPXQLNDFLMVNLWHUPLQDOVNLRSUHPL
5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone
transmitters and receivers for the maritime mobile service operating in VHF bands; Part
3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE
Directive
Ta slovenski standard je istoveten z: EN 300 162-3 Version 1.1.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 300 162-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 162-3:2001

---------------------- Page: 2 ----------------------

SIST EN 300 162-3:2001
ETSI EN 300 162-3 V1.1.1 (2001-05)
Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Radiotelephone transmitters and receivers
for the maritime mobile service operating in VHF bands;
Part 3: Harmonized EN covering essential requirements
of article 3.3 (e) of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 300 162-3:2001
2 ETSI EN 300 162-3 V1.1.1 (2001-05)
Reference
DEN/ERM-RP01-046-3
Keywords
EMC, GMDSS, maritime, radio, regulation,
telephony, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 162-3:2001
3 ETSI EN 300 162-3 V1.1.1 (2001-05)
Contents
Intellectual Property Rights .6
Foreword.6
Introduction.7
1 Scope.9
2 References.9
3 Definitions and abbreviations.10
3.1 Definitions . 10
3.2 Abbreviations. 10
4 Technical requirements specifications .11
4.1 Environmental profile. 11
4.2 General, operational and technical requirements. 11
4.2.1 General and operational requirements. 11
4.2.1.1 Construction. 11
4.2.1.2 Controls and indicators . 12
4.2.1.3 Safety precautions . 12
4.2.1.4 Labelling. 12
4.2.1.5 Warm up . 13
4.2.2 Technical requirements . 13
4.2.2.1 Switching time. 13
4.2.2.2 Class of emission and modulation characteristics. 13
4.2.2.3 Multiple watch facilities. 13
4.2.2.3.1 Additional performance standards. 13
4.2.2.3.2 Scanning characteristics . 14
4.2.2.4 Interfaces. 14
4.2.2.4.1 DSC controller interfaces . 14
4.2.2.4.2 Operational interfaces. 14
4.3 Environmental requirements. 14
4.3.1 Vibration test . 14
4.3.1.1 Definition. 14
4.3.1.2 Requirement. 14
4.3.1.3 Conformance. 14
4.3.2 Temperature tests. 15
4.3.2.1 Definition. 15
4.3.2.2 Dry heat . 15
4.3.2.2.1 Definition. 15
4.3.2.2.2 Requirement. 15
4.3.2.2.3 Conformance. 15
4.3.2.3 Damp heat. 15
4.3.2.3.1 Definition. 15
4.3.2.3.2 Requirement. 15
4.3.2.3.3 Conformance. 15
4.3.2.4 Low temperature cycle. 15
4.3.2.4.1 Definition. 15
4.3.2.4.2 Requirement. 15
4.3.2.4.3 Conformance. 15
4.4 Conformance requirements. 16
4.4.1 Transmitter carrier power, specific channels . 16
4.4.1.1 Definition. 16
4.4.1.2 Limit. 16
4.4.1.3 Conformance. 16
4.4.2 Sensitivity of the modulator, including microphone .16
4.4.2.1 Definition. 16
4.4.2.2 Limit. 16
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 162-3:2001
4 ETSI EN 300 162-3 V1.1.1 (2001-05)
4.4.2.3 Conformance. 16
4.4.3 Audio frequency response . 16
4.4.3.1 Definition. 16
4.4.3.2 Limit. 17
4.4.3.3 Conformance. 17
4.4.4 Audio frequency harmonic distortion of the emission. 17
4.4.4.1 Definition. 17
4.4.4.2 Limit. 17
4.4.4.3 Conformance. 17
4.4.5 Residual modulation of the transmitter . 18
4.4.5.1 Definition. 18
4.4.5.2 Limit. 18
4.4.5.3 Conformance. 18
4.4.6 DSC audio input characteristics. 18
4.4.6.1 Definition. 18
4.4.6.2 Limit. 18
4.4.6.3 Conformance. 18
4.4.7 DSC audio input limitation. 18
4.4.7.1 Definition. 18
4.4.7.2 Limit. 18
4.4.7.3 Conformance. 18
4.4.8 Modulation attack time. 18
4.4.8.1 Definition. 18
4.4.8.2 Limit. 19
4.4.8.3 Conformance. 19
4.4.9 Harmonic distortion and rated audio frequency output power. 19
4.4.9.1 Definition. 19
4.4.9.2 Limit. 19
4.4.9.3 Conformance. 19
4.4.10 Audio frequency response . 20
4.4.10.1 Definition. 20
4.4.10.2 Limit. 20
4.4.10.3 Conformance. 20
4.4.11 Maximum usable sensitivity. 20
4.4.11.1 Definition. 20
4.4.11.2 Limit. 21
4.4.11.3 Conformance. 21
4.4.12 Receiver noise and hum level . 21
4.4.12.1 Definition. 21
4.4.12.2 Limit. 21
4.4.12.3 Conformance. 21
4.4.13 Squelch operation . 21
4.4.13.1 Definition. 21
4.4.13.2 Limit. 21
4.4.13.3 Conformance. 21
4.4.14 Squelch hysteresis. 21
4.4.14.1 Definition. 21
4.4.14.2 Limit. 21
4.4.14.3 Conformance. 22
4.4.15 DSC audio output characteristic . 22
4.4.15.1 Definition. 22
4.4.15.2 Limit. 22
4.4.15.3 Conformance. 22
5 Testing for compliance with technical requirements .22
5.1 Test conditions, power supply and ambient temperatures. 22
5.1.1 Arrangements for test signals applied to the receiver input. 22
5.1.2 Squelch. 22
5.1.3 Normal test modulation. 22
5.1.4 Artificial antenna . 22
5.1.5 Arrangements for test signals applied to the transmitter input. 22
5.1.6 Test channels . 22
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 162-3:2001
5 ETSI EN 300 162-3 V1.1.1 (2001-05)
5.1.7 Test conditions, power sources and ambient temperatures. 23
5.1.7.1 Normal and extreme test conditions . 23
5.1.7.2 Test power source. 23
5.1.8 Normal test conditions . 23
5.1.8.1 Normal temperature and humidity. 23
5.1.8.2 Normal power sources . 23
5.1.8.2.1 Mains voltage and frequency. 23
5.1.8.2.2 Battery power source. 23
5.1.8.2.3 Other power sources. 23
5.1.9 Extreme test conditions . 23
5.1.9.1 Extreme temperatures . 23
5.1.9.2 Extreme values of test power sources . 24
5.1.9.2.1 Mains voltage. 24
5.1.9.2.2 Battery power source. 24
5.1.9.2.3 Other power sources. 24
5.1.10 Procedure for tests at extreme temperatures . 24
5.1.11 Substitution antenna. 24
5.2 Interpretation of the measurement results. 25
5.3 Essential radio test suites . 25
5.3.1 Environmental tests. 25
5.3.1.1 Introduction. 25
5.3.1.2 Procedure . 25
5.3.1.3 Performance check . 26
5.3.1.4 Vibration test. 26
5.3.1.5 Temperature tests. 27
5.3.1.5.1 Dry heat. 27
5.3.1.5.2 Damp heat. 27
5.3.1.5.3 Low temperature cycle . 27
5.3.2 Transmitter carrier power, specific channels . 27
5.3.3 Sensitivity of the modulator, including microphone .28
5.3.4 Audio frequency response . 28
5.3.5 Audio frequency harmonic distortion of the emission. 28
5.3.5.1 Method. 28
5.3.5.2 Normal test conditions. 28
5.3.5.3 Extreme test conditions. 28
5.3.6 Residual modulation of the transmitter . 28
5.3.7 DSC audio input characteristics. 29
5.3.8 DSC audio input limitation. 29
5.3.9 Modulation attack time. 29
5.4 Other test specifications. 30
5.4.1 General. 30
5.4.2 Harmonic distortion and rated audio frequency output power. 30
5.4.3 Audio frequency response . 30
5.4.4 Maximum usable sensitivity. 31
5.4.5 Receiver noise and hum level . 31
5.4.6 Squelch operation . 31
5.4.7 Squelch hysteresis. 32
5.4.8 DSC audio output characteristic . 32
Annex A (normative): The EN Requirements Table (EN-RT).33
Annex B (informative): The EN title in the official languages.35
Annex C (informative): Bibliography.36
History .37
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 162-3:2001
6 ETSI EN 300 162-3 V1.1.1 (2001-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 3, of a multi-part deliverable covering the radiotelephone transmitters and receivers for the
maritime mobile service operating in VHF bands, as identifie
...